Auster - Planet Painting with Spray Paint

Hi guys and welcome to my channel. In today's video I'm going to be using the Usta spray paint. I'm going to be using an aftermarket skinny cap on the cans. I'm also going to be painting on some glossy paper which is 350 gsm. First up we'll get some yellow, let's put it random on the sheet like that. Now we'll get some red and just spray that randomly on the sheet. Yes, like that. Let's just bang a bit of yellow on the top of that. Yes, now we'll get some black on here down the bottom like that. A bit of white just randomly anywhere like that. We can go there, anywhere. I'll get some stuff to make some texture with. I'm going to be using a plastic sheet but magazine paper or anything like that will work so I'll just crunch it up like that. Place over wet paint, give it a nice rub with the fingers like that. Make some lovely texture this way. Now we'll just peel it off and that looks awesome. Love it. What I'll do, get some white for the highlight. Lightly spray it like that. Now some black for the shadow. I want to keep some of that nice yellowy at the bottom. I think that'll do there. Now what we'll do is we'll dry it. So we'll get the heat gun and we'll dry with the heat gun. What you want to do is you want to move around the sheet so you don't burn the paint. Now we'll do a touch test so that's completely dry there and the black. You want this paint to be completely dry before placing your lid stencils on especially if it's got weight on it because if it's wet the lid stencil will stick into the wet paint and then leave a ring around your planet. So now it's dry we'll place the lid stencil on. So just remember covering a bit of a black and a bit of a white. So I'm going to have that there I think. More over this way this time. So a bit of colour down here for your signature later. Now we'll get the black and we'll go around it all and fill it in with black for background. So around your lid stencil lightly like that. Do it lightly so you don't get no leaking under your stencil. Now we'll do all the background in black. Like seen in previous videos it takes a bit longer to do the black when you're using a skinny cap. The reason for that is it lets a lot less paint out than if you're using a fatter cap or a stock cap. I do have a full in-depth tutorial about the Huster spray paint on my channel so if you want some more information about that check that out. I also in that video I use a stock cap on the can so you can see the difference between using a skinny cap on the stock and the stock cap on these cans. Well now we've got the background black I'm going to add a bit of colour to it so I think what I'll do is I'm going to put a yellow glow I think around this. So I'll get the paint spray towards the lid stencil you can always come in from this side and then move over and you can spray it like that so it gets a glow effect out. Don't mind if I have splatters everywhere because it can look like Now we'll get some of a red I think I might spray a bit there yeah let's put a bit of red there like that red a bit of red coming in there like that why not yeah a bit more there nice no a bit of yellow a bit of yellow there coming in like that and a bit there keep the red as well like that I do just tidy this up a bit here around this planet at the back beauty of spray painting is you can always tidy things up if you made a mistake or you put too much paint in the background just go like that with it I'm liking that so we'll move on to the stars like always a bit of white on your finger like that flick it away then flick the rest onto your painting this way flicking it off your finger gives you more control of where the stars are going and they're nicer there's not a big clump of them in one place and also if you want them up the top you can just flick them up the top there so let's one more flick there oh no why not one more up here that seemed like that and there like them that's enough stars there so now we've added the white stars we'll add some bigger colorful stars using this I call it a star stencil you can find how to make these in another video on my channel I'll link that video here in the cards so what we'll do is we'll get some red first and I think I'll have one I'll have one there so just spray your fruit there I'll have one here as well why not yes like that so I'm liking that I might yeah why not let's have a big yellow one here yeah and I'll do like that now we'll go yellow paint the yellow in the middle like that there it's not quite in the middle like but don't matter just out of there like that I'm gonna leave that one like that I think I can just put a bit of white in that one so it doesn't have to be a color it can be just white probably like that nice big white glowing yellow star I might put some yeah let's put a bit of a couple of red ones in places this is another star stencil you can also see on the same video how I do the paintings with these I'll have a red one there put a yellow one there and one here I think right so that's them done we'll add some white dots in the middle of these colorful stars so with a paint pen or something like that we can just go in the middle just push them down we'll get some more paint through here you can always go over them if it doesn't come out first time one here one here try not to touch it yeah painting that'll do like that so now all the background's done it's time to take the lid stencil off so like I said just take your time with these that's a bit stuck on the black might not be enough dry just take your time it will come off so just push it down there like that push that back in place oh yeah I really like that planet I love them colors the red and yellows and it's also mixed to make a bit of an orange color as well I think it looks awesome really like that so as you can see the lid did dig into the paint a bit here on the black and you see there so what you can do for this is you can get the black and a piece of card and curve it a bit what you can do is you get your card there and you can you can just spray it a bit may take a couple of goes on there so what you're doing is you're kind of using the over spray to cover the black up and just watch out around it as well because you can't put it on the background you've got to watch out for runs as well when you're doing that so you've still got a bit there but I'm not going to do any more on it I'm just showing you how it can be done so now we've covered this bit where the paint's pulled up a bit what I'm going to do is I'm going to try some clear coat on this so I'm going to be using the Montana clear coat to varnish this is gloss so I'm using two cans because they're nearly empty and let's see if it reacts with the paint so give it a nice glossy finish as well because this is gloss clear coat so where we're signing it spray a bit more on there get the pallet knife and we'll sign it here and the painting's finished so I really like how this one's turned out I love them colors on I think it looks awesome so the clear coat worked really well on this didn't react or anything with the paint so that's a good thing you can also find a more in-depth tutorial about your spray paint on my channel you can also find lots of beginner step-by-step tutorials so if you're just starting out spray paint art go and check them out they'll be really helpful I hope you enjoyed watching this spray painting video and if so don't forget to give it a like it'll be very much appreciated and if you're a new visitor to my channel don't forget to hit that subscribe button it'll really help my channel grow and thank you for stopping by and watching I hope to see you in the next spray paint art video have a great day take care and bye for now