The Most Automated Smart Home on Wheels EVER.

Smart Home Devices
120 followers
7 Video Views·Nov 4, 2025
All right, this tour is going to be different because for the first time it's not a smart
home tour, it's a smart van tour. And there are so many great ideas packed into this van that can
apply to any smart home. Mike from Smarty Van has automated things that I didn't even know
could be automated, so let's check it out. All right, first let's start off with the main piece
of hardware, the van itself. This is a 4x4 170 Sprinter van that has been completely remodeled.
That means it was carefully designed by these two to be the ultimate smart van. Hey, I'm Mike.
And I'm Char. Just about three years ago we decided to move into a van full-time,
and we decided to build it ourselves. So we bought an empty cargo van and built it from the ground
up. That gave us the opportunity to also design all the home automation that goes on inside the
van. Yeah, so this isn't like living in a van down by the river. In a van down by the river.
There is tons of cool stuff packed in here. Like 180 pound pull force electromagnetic door locks,
multiple fresh water and grade tanks, and a controllable water pump. This is our dining room,
but the motorized bed platform drops the bed down and becomes our bedroom at night. This room also
serves as our theater with a motorized projection screen, speakers on the rear door, and a hidden
magnet for the projector. Lighting is really important to us, so everything from the ceiling
to the floor uses the same matched Cobb style LED lights. Those are the kind of lights where you
can't even really see the LEDs, but we diffuse them anyway because we like really soft light.
One of our favorite features is the motorized magic drawer, which we can use for storage,
but it also has 500 pound drawer slides so they can be used as a step to get into bed.
Like most RVs and vans, we of course have a ventilation fan, which came with an IR remote,
but we made it smart. Since our home is on wheels, it's really important for us to be able to pull
data from the vehicle in, so we use a Wican OBD reader into the OBD port of the vehicle so we can
get all that data into our home automation platform. We also combine Starlink, which is
mounted on the roof, with a couple of SIM cards that are multi-carrier SIM cards, so we're always
connected to the internet. When we arrive at camp, we always want to try to level the van,
so we carry some blocks around that are traction blocks and leveling blocks, but we have a controller
in the van that uses an IMU to detect the level of the van, and it suggests the number of blocks to
use to get us to level. With this side having the sliding door, this is of course where we like to
hang out the most, and at night we love to have soft lighting, so there's underglow strips underneath
the chassis, and there's a soft strip underneath the awning that works whether the awning is open
or closed. On the roof, we have a Starlink Gen 3, as well as 600 watts of solar. We also have an
antenna for our cellular and Wi-Fi signals, and three cameras so that we can get a 360 view around
the van. Like I said, there is so much cool stuff in this van, but what makes it even better is
making them smart so they can all work together. And what better way to display everything than a
dashboard? So our main dashboard is here in the kitchen, but the goal was to integrate everything
in the van, from the engine to the water, electricity, the beds, the lights, everything is
integrated and available on this main dashboard display, but we wanted to be able to view and
control everything from right here without having buttons, gauges, dials, and switches everywhere.
That's pretty common in RVs and vans, and aesthetically, I just wanted to keep it really
clean, so everything lives right here. And you might be wondering, how do you connect drawers to
your smart home or smart van? Well, Mike was really smart and found a way to connect it. We settled on
electromagnetic drawer locks for the drawers, and those simply required 12 volts to be applied to
lock. So if you apply 12 volts, the magnets lock, and if you remove that voltage, the magnets unlock.
So I developed a little controller using ESPHome and a MOSFET driver, and that allows me to switch
the 12 volts on and off through our automation platform. Isn't that so cool that Mike was able
to figure out how to connect these drawers to his smart van? And wait till you see how he's
automating it. We'll get to that in a second. So just like these drawer locks, Mike added micro
controllers all over this van, and for a good reason. In fact, we use a lot of ESPHome controllers
for everything from HVAC to the electronic valves in our plumbing system, and the reason really is
because our house system is DC. Our electric system is 12 volts, and that means it's really ideal to
use low voltage DC powered microcontrollers to control all this stuff. You could get off the
shelf bits for a home that doesn't have wheels, but that's probably going to require 110 volt power,
and we really just don't have that. Yeah, there's just not a lot of smart home devices that are made
to work with RVs and vans. So I think it's pretty sweet that Mike was able to venture into uncharted
territories and figure this stuff out, because there's not really a good off-the-shelf solution,
and he's able to write all the code and get those microcontrollers working with those devices.
It's awesome. Okay, but what smart home hub is running this van? We thought about using one of
the standard smart home platforms for the van, but after trying it, we realized we needed something
that was more powerful and more flexible to do all the custom integrations we would need
in a moving home, so we settled on Home Assistant. We're running it on a Raspberry Pi,
and it's in the electrics bench right under me. It's been working great. It's been running for
almost three years non-stop. And for the mega nerds out there who need to know how he's getting
these devices to talk with Home Assistant, here you go. We do use ESPHome for a lot of controls
in the van, but we also use MQTT. For instance, we get vehicle data from the OBD port into our MQTT
server, as well as all of our electronics. Our whole Victron system communicates with Home
Assistant via MQTT. And of course, our Zigbee sensors. These are our door sensors, leak detection,
as well as temperature and humidity sensors. Those are all integrated via Zigbee to MQTT
into Home Assistant. So speaking of those Zigbee sensors, look what we have in here.
An Aqara contact sensor. And Aqara is sponsoring this tour series because traveling is expensive,
so they're helping making it possible. And Mike is using Aqara sensors all over the van.
You know, contact, water leak, and temperature sensors. And he has limited space here,
so the fact that he's choosing to use Aqara and sticking with them shows how good the sensors are.
And Aqara also sent over the FP2 for Mike to use for different automations here in the van.
It's pretty sweet. If you've never used it, you can divide up sections into different zones and
run automations depending on where you're standing or sitting. Aqara makes a lot of
unique devices like this one that I don't see a lot of other manufacturers making.
And I've been using Aqara devices all over my home for years, and they work extremely well for me.
Thanks for Aqara for sponsoring this video. I'll have links to all their stuff down in
description. And thanks for making these smart home tours possible.
We actually were saved by one of the Aqara leak detector sensors. I had the whole home
automation system sketched out, and I was driving around testing our plumbing system,
and I got a critical alert on my phone thanks to a push notification that there was a water leak
detected in this area. And I was able to pull over really quickly and stop the water pump from
filling the van with water. So another example of automation really saving our butts.
Yeah, Mike has tons of really cool automations in here. So let's get into how he's automating
this van. The challenge of living in a van is that there are a lot of systems that should
ideally be shut down when we're away from the van. So to solve that problem, we automated
everything using presence detection. We use Bluetooth on our phones so that when we leave
the van, critical systems like the water pump, the inverter, and the lights all shut down while
we're gone. Yeah, so they're just using the Bluetooth on their phone to turn everything
off, which is so convenient. And that way, they just never have to worry about it.
Char and Mike also have some unique challenges since they can't always pull power from the grid.
Mike and I love to cook in the van. We're cooking almost daily, and we never want to
overload our inverter. Otherwise, it'll shut off, and we won't be able to cook anymore. Whenever
we're using our cooktop and our Instant Pot, we'll get a push notification to our phone if
we're using too much power so that we'll know to turn it down so we don't overload the inverter.
So I think it's so amazing that Mike was able to integrate the power and all of that to make
this automation possible to just make van life that much easier. And wait till you hear about
this next one. Traveling in a van is so much better with this automation. Before we hit the
road, there's usually a huge long checklist of items we need to make sure to button down before
we can leave. So we decided to automate it to make life a little bit easier. We use a combination of
the OBD port to sense the speedometer of the vehicle, as well as the 12-volt signal for the
ignition. So between those two things, we can shut down a whole list of things. We can lock
the drawers, we can turn off the inverter, shut off the water pump, close the max air fan, etc.
That way everything's kind of locked down, ready to go when we're on the road. So as you can imagine
when you're traveling long distances in a van and you finally get to your destination, you might just
want to finally lay down, relax, not get up, and do anything. So they have automation to help with
that. When we're ready to relax, we grab our projector, pop it into the magnet on the ceiling,
turn it on, and the lights automatically dim. The projector screen automatically comes down
and we're able to just relax. To make that happen, we use an integration with Home Assistant for the
Nebula Capsule 3 projector, and it's just detecting that the power is on on the Capsule 3, and then
the projector screen comes down. But that automation has a condition which checks to make
sure that the bed is up before that screen is lowered. Otherwise, the screen could come down
when the bed is down and it could damage the screen. I can't believe they have a mini movie
theater here in their van. How cool is this? So this moving bed has some challenges as you can
imagine with all the cables and everything that's plugged in. You don't want them getting caught in
the motor or in the rails or anything like that. So Mike was really smart and used this cable chase
to handle all the wires and keep everything nice and secure so nothing ever gets caught when the
bed is moving up and down. Now one really unique challenge that probably a lot of us wouldn't think
of is a smart home platform is meant to be like in one spot. If you're changing time zones in a
moving van, well that's going to throw off all the automation. So Mike came up with a really clever
solution. While Home Assistant does have a service to update its actual location, it doesn't affect
the time zone. So I ended up creating a custom component for Home Assistant called Geo Locator,
and that allows you to provide GPS coordinates. In our case, we're pulling that from the antenna
connected to our router. We're feeding that into my custom component, which then determines the
time zone of our current location. Now as we're moving around, this information constantly updates
using an automation, and it even announces out loud when we're in a new time zone. So we have
this dashboard up front in the cab as well, and I can keep my eyes on where we are in the world.
It's awesome that Mike found a great solution to this to keep making van life easier.
Because we've integrated all the 12 volt valves and water tank level sensors into Home Assistant,
it really simplifies our life. We have two freshwater tanks, and if the primary tank's empty,
then our automation will automatically switch over and pull from the auxiliary tank. It's just
one less thing that we have to worry about and monitor and micromanage every day.
So Mike has a YouTube channel, SmartyVan, where he's made a lot of videos like how he set up
these drawer locks and all the things connected in a smart van, and they're very detailed,
extremely helpful. So go subscribe to him on YouTube. You'll learn so much. Even if you don't
have a van, it will still apply to your own smart home, like how he uses security cameras to protect
his stuff. We travel and live full time in our van, and we have all of our personal belongings
with us, so security was kind of an important issue. So we installed three IP cameras all
around the exterior of the van, and we leave them running all the time. But we've automated it so
that we can send alerts to our phones via push notifications when people are detected around the
van. And we're using a Google Coral machine learning device to help detect those objects
in the camera feeds. This is all done locally on our Raspberry Pi and kept offline on Home
Assistant install in the van. Now, keeping an eye on everything with the cameras gives such peace of
mind, and I love looking at my cameras when I'm away from the house. But as you can imagine, they
need to stay connected to this van all the time. So Mike came up with a way that was really creative
that makes sure that always happens. When we're away from the van, we're often just relying on a
SIM card that can connect to multiple carriers. But if that cellular connection is down and Starlink
is off, we have an automation that waits for a number of hours and then turns Starlink on,
waits for it to connect, sends me a notification, and gives me an opportunity to log in and either
keep the Starlink on or address the SIM card issue. This way, we're never fully disconnected
from the van for longer than a couple of hours. So it's a Starlink backup automation. That's really
smart and could be used at any remote location like a cabin. Now, I have bedtime automations,
but they don't involve this. We drop the bed down and an automation shuts down everything in the
van. The inverter, the water pump, everything that we don't need at night. It even turns on a little
red nightlight in the bathroom. Then we have one button in the van right next to the bed,
and that final button push shuts the rest of the systems down and starts a Starlink sleep timer.
And that's it for the night. It's impressive. Everything Mike's been able to automate in their
van. And what's even crazier is everything they've seen and experienced in their year and a half of
living in here full time. We have traveled to 31 different states, three different countries,
23 national parks, and we've slept in 198 different locations. Yeah, it's a lot of moving
around. And honestly, if we went back and built this van again, I would automate it. And I would
probably take it even further because it really has made our adventure more special. It's a hobby
as well for me, but I think it makes things easier. All right. So my big question is, I know
really wants to live in a van. Is it worth it? Should I, should we do it? Yeah. Absolutely.
Especially if it's fully automated. Yeah. What about with three kids?
Absolutely. Yeah. Something a little bigger. 46. Nope. Not that much.
Less than an hour. Actually, I don't know if I can handle with our three kids. There's no way
we can handle it. You guys should definitely go follow Smartivan on YouTube. I'll link all their
links down below. They have some awesome videos, all their adventures and super useful tutorials
and everything. So definitely go follow them. And thanks you guys for letting me hang out with you
and see your van. It's been awesome. All this stuff. So cool. Thanks for coming out. Yeah.
And thanks for watching. I always feel so stupid doing these thumbnails. Yeah.
I think I got it before the sun came out.
