Crest 8600 with 5 Blades

TV Electric Fan
2 followers
10 Video Views·Oct 31, 2025
Testing the Crest 8600 ceiling fan with only 5 of the 6 blades installed.
Here we go again with the Crest 8600. This time we're going to show it with five blades.
I'm not too fond of this idea but I don't think it should be as bad
as one blade because it's not going to run as fast.
There was an overwhelming amount of requests to show this with one blade with the light
hanging from the wires and I'm not going to do that. That kind of falls into the category of
just completely ridiculous and unreasonable. However, I will do that with a different fan
just not this one because I like this one. I don't want it to break.
Okay the singular blade has been removed.
I almost just fell. That's great. I'm not sure where the best angle for this is. Probably
lower down at least for the thumbnail so we can get a good thumbnail of this ridiculous
configuration. The tripod is not letting me lower this down anymore. There it goes.
Okay there's the thumbnail and let's turn it on. I don't know if it's on high or low on the fan.
Looks like it might be on high on the chain. This is low on the wall the control.
Why is all this dirt on the wall? The wall is all dirty by the telephone. That's kind of weird.
Marks all over this wall. What the heck? Probably from trying to get stuff in and out of the attic
I guess. All right so that seems to be up to speed now. Is that high or low on the chain?
I think that might have been low on the chain. I can't tell.
The motor doesn't hum much with less of the load on it.
Yeah it's going fast now. That must have been low so I think this is now medium
and I suspect that point of equilibrium will be a little bit faster than it was with one blade.
So far this has been pretty reasonable but I don't think that that will last.
I think this is soon to become kind of unreasonable. I wouldn't really expect this to push
much more air than it was before but it kind of seems like it's pushing a little bit more air.
Okay now we'll go up to high on the chain but low on the wall.
and things are going to start to get a little dodgy here. It might get better as it speeds up.
I'm not sure. The light is all tightened up so it shouldn't fall. Okay here's the high.
Oh gosh and the fan itself isn't shaking all that bad. It's the stupid light that's the problem.
Come loose again. Oh it just came loose again. I have to do busted light part two.
Well there it was. There's the five blades and that is the last of the out of balance
configurations I'm willing to show on this fan. It's just too dodgy.
Now this series did get a ridiculous amount of views so inherently
this is the kind of material that people are after right now and that's fine. I can keep filming
videos like this but it's not going to be with this particular fan. It's going to be with a piece
of junk fan that doesn't matter if it breaks. Yep I got to fix the light again. Dang it.
I think that the screwdriver is still upstairs so
just take care of that right after this video. We'll do busted light the sequel.
It didn't break as bad this time but it's still pretty loose. Looser than it should be.
