Anatomy of a Sprint Car with Justin Grant

Screw Driver
87 followers
#nascar #racing #sportsnews #motogp
Team AMSOIL USAC Sprint Car driver Justin Grant shows us what makes his #4 sprint car "gnarly."
Find out why he only trusts AMSOIL products to protect his livelihood. 🏁
Hi, I'm Justin Grant.
I drive non-winged sprint cars, do a little bit of midget and silver crown racing as well.
But today we're going to blow around the Top Motorsports NOS Energy Drink number four and
show you guys a little bit of what makes sprint cars unique.
Some of the basic kind of broad overview dimensions of this thing, it's an 87-inch wheel base.
It's got an aluminum, all aluminum head, aluminum block, 410 cubic inch motor.
It's fuel injected with methanol.
Got a 28-gallon fuel cell on the back behind the driver's seat there.
One of the things that makes sprint cars unique, it's a solid rear axle.
That's why you see the rear tires are vastly different in size, will vary depending on
track conditions and track size, anywhere from like 12 inches of stagger, which is the
split between the two tires' circumference, all the way down nearly to six inches sometimes.
And being on solid axle, that's the only way it's going to turn.
It's kind of the solo cup effect.
You roll a solo cup, it'll cut a circle.
Same thing's happening here.
Another part that's kind of tied into that that's unique is sprint cars are direct drive.
So we've got a shifter in the cockpit.
You're either in gear or out of gear.
So you roll up to what we call staging, lock the thing in gear, push truck hits you and
fires you off, and you're done with that for the rest of the race.
We've got a DMI rear end.
It's got a quick change cover on the back of it.
Pop those six bolts off, you can change your gear ratio there.
And we'll do that tuned to track condition and track size as well.
So you notice on our right side wheels, we've got these Valco wheel covers.
Those are there, the tracks as they wear in, they'll get a real tall curve.
It can be anywhere.
I mean, it can be this tall some days.
You go banging into that thing, which we do frequently, you know, you find traction against
it, you can make a lot of speed against it.
If you don't have this cover, it'll pack the wheel full of mud.
Then you got big vibration, big shake, tears parts up, shakes the drive out of the rear
tires and generally just beats you nearly to death.
We've got crazy low air pressure.
So our operating range on the right rear tire is between six and nine pounds most nights.
Our left rear will play between three and five, just trying to get as much grip and
as much drive as we can out of these, you know, slick dirt racetracks.
This is kind of my office here.
I've got an UltraShield seat with Sharp Advantage safety insert.
It's a poured insert, kind of molds to your body, as well as a nice, you know, high-density
foam head surround, shoulder support.
Going inside the car, we've got the torque tube contains the drive shaft.
That runs right between your feet, under you and into that direct drive rear end.
We've got power steering pump and fuel pump, kind of off the back of the cam between your
knees.
Inside these tubes here, we have a torsion bar, which is essentially a spring, but it's
in a bar that is torsional resistance.
Moving into our shock dampeners here, so you can see there's a cable here running up the
frame rail to the cockpit.
We've got knobs in there that we can screw on while we're racing and change how much
dampening that each corner of the car has.
Your traditional sprint car has got two brake calipers on it, two brake rotors, and one
master cylinder.
The rear caliper and rotor is what we call an inboard.
One caliper, one rotor controls both sides, being that it's a solid live rear axle.
You move to the front of the car, it's a bit unique.
We only run a brake on the left front.
We're only oval racing and we're always going left.
It helps us get the car turned in a corner and initiate that big yaw that you guys see
us slouching around with.
These things get dirty and we race night in and night out, 50, 60 times a year.
You're going to the car wash every night after the races and you're there until two or three
in the morning anyway.
The less time you can spend tearing these things down, the better.
This is part that makes that easy.
Quarter turn Zeus fastener.
You can pop the body off of this thing in no time, all the way down to the frame.
Our bodies are also mostly carbon fiber.
Just try and keep the weight down and the carbon fiber adds a lot of longevity to the
body as well.
Radiator here in front.
Honeycomb to protect the fins and keep it from A, getting a hole in it, and B, getting
just blasted and filled with mud.
On that same note, we've got rock guards here to protect the spark plugs and the nozzle
lines down the right side.
Moving a little deeper, we'll run an outboard water heater that's got quick disconnects
here and here.
Goes back to this thing being direct drive and using a push truck to start it.
When we go out to qualify, you're in staging, motor not running, push truck pushes you,
fires off, and you're wide open for two laps.
So the thing's got to be hot, it's got to be warm, bearing's got to be loosened up when
that happens.
You can't go out with a cold motor.
One, it doesn't run good.
Two, it tears up parts.
These are pretty gnarly race cars.
It's important that we can trust the components and the products that we use.
These motors are 900 horsepower and we treat them terribly.
We run them through the dirt, we turn them way too many RPM all night long, and we trust
AMSOIL to keep them alive.
