How to Paint Soft and Dreamy vibe | Step by Step Tutorial

Painting and drawing ideas 3
28 followers
6 Video Views·Oct 28, 2025
Comments are disabled for this video.
Hi guys, today I'm showing you how to paint these dreamy loose watercolor flowers.
These are the tools I'm using. Firstly, I'm wetting the whole page. I'm loading a large
amount of water for this wet-on-wet technique. The paper I'm using allows a sufficient amount
of water to absorb, so the paper can fully stretch out. It's 100% cotton, cold-pressed,
300gsm watercolor paper, and that's what I suggest you use for this painting.
Even within these specifications, the exact absorbency of paper can vary slightly. Just
make sure the paper is wet enough, but not so wet that the water seeps or moves on the surface.
If you do end up adding a little too much and have water just sitting on top without soaking
in anymore, don't worry. You can get rid of the excess flowing water from the surface of the
paper by using a brush or a napkin to soak it off. Now I'm loading some green colors. The paints
I'm using here are from Daniel Smith. These are granulation green colors, but of course you could
use any non-granulation paints for this. Choose one green that shifts toward warm and another
cooler green for some variety. Dab the color here and there like this. We're not trying to cover the
whole page, just add some green patches and try to keep the warm and cool greens separate so they
don't blend and become muddy. If your paints aren't spreading out as much as mine are, you can add a
little bit more water to your brush, which can help with this to some extent. At this moment,
the whole paper is wet enough, so you can easily create smooth washes. Now I'm dabbing some
quinacridone rose on some of the white spaces here and there. You can see the color here is not spreading much
with somewhat noticeable boundaries. I didn't load too much water onto the brush to make sure it holds
less water than the paper. This is a safer approach for beginners and helps prevent blotchy
backgrounds when the previous white layer starts to dry. To counteract a lack of spreading, you can
use a clean white brush to soften the edges and the whiteness should be similar to the whiteness
of the paper. When the paint spreads out a bit, the color in turn gets paler, so you can then
strengthen the color a little by adding thicker paint without much water. I have added all of the
colors I want for now. Now I'm adding some white ink without loading extra water and dabbing it
on the white gaps between these color blotches. We can see how much it spreads out and then if we
want we can load some water to help it spread out even further. Do not add water in the first place
when you load the ink, as the ink would quickly become too diluted. Now I'm adding some thick
warm green to give the painting some more depth. The paper is drying out whilst we paint. I'm loading
some of the rose paint with a thin brush and dab it like this to create loose flowers. The paint's
nearly dry but not completely dry, so the edges are still soft. If the paper were fully dry, the edges
would look harsh. Keep in mind to keep the water on your brush minimum at this stage. Now I'm just
adding a little green around the flowers. The paper is even drier and using a clean dry brush to leave
some color for dreamy bubbles. If yours isn't lifting as easily as mine, your paper might be too dry
or more likely you're using a highly staining paint. In that case, you can try another medium
like white acrylic or gouache. Now I'm painting another type of flower. You can paint any flowers
you want but don't make it over complicated. Keep it simple.
