Blender3D 3.0 - Procedural Flower modeling in Blender 3D using Geometry Nodes (PART2)

Decor Design 3D
20 followers
1 Video View·Oct 27, 2025
Hi guys, welcome back to my channel. In this video we are going to animate the procedural flower
but before we animate the flower i want to make some changes to our point in the cloning section
so in the previous video i made a mistake on the points in cloning section i'm so sorry for that
so in the previous video we clone our petals on a regular spiral shape then we delete one point
after another point to get the position we want so even though it looks fine but actually in the
real world the plant isn't going to grow that way unless we are going to make a stylized flower
so in the real world the plant are actually grow in the phyllotaxis spiral shape so instead of
using a regular spiral to get the point we need we are supposed to use a phyllotaxis spiral
to get the point so in order to get the phyllotaxis spiral in blender we have to follow this formula
right here so first we have to find out the rotation angle and the radius then after we get
the rotation angle and radius we need to calculate the position of the point for x and y axis so
let's go to blender select the flower in the geometry node editor go to cloning section
add a joint geometry after the set material let's move all of this beside so we have more space
and then delete everything in the cloning section then i think we can disconnect the set material
and put it beside for now okay now add a curve line and connect it to the joint geometry
so our curve line is here this one then add a resample curve i want to add more points to the
curve line then add a set position because we want to manipulate the point okay then refer to the
formula first we need to find out the rotation angle the rotation angle is equal to point number
multiply 137.5 so the point number mentioned here is the point number of the curve line we added
just now and 137.5 is actually a golden angle to form a phyllotaxis spiral so in the geometry
node editor let's add an index node to get the point number of the curve line then add a math
node change the function to multiply connect the index to multiply then we need to multiply the
137.5 so duplicate the math node change the function to radian type 137.5 connect it to multiply
so now this is the result for the rotation angle select the node press f2 and name it result of
rotation angle okay next we need to calculate the radius so the radius is equal to point number
multiply value so this is our point number this one our point number so the value here is a
scaling parameter we can put any value for this depends on the size we want so add a value node
duplicate this math node then we need to take the value to multiply the index which is the
point number okay now this is the result for radius again select the node press f2 and rename
it result of radius so after we get the rotation angle and radius we can continue to another
formula here x equal to cosine of rotation angle multiply radius and y equal to sine of rotation
angle multiply radius so this is pretty simple we just need to follow it let's start from the
calculation for x-axis so in the geometry node editor add a math node change the function to
multiply then take the result of the radius here and connect it to the multiply then duplicate
the math node change this to cosine then take the result of rotation angle and connect it to the
cosine then connect the cosine to this multiply then we need to output this result to the x-axis
position so let's add a combine x y z connect the multiply to the x-axis then connect the combine
x y z to the set position then increase the value here so we can see the result put 0.6 maybe so
currently is a straight line okay now let's continue to calculate the y-axis so the y-axis
is y equal to sine of rotation angle multiply radius so duplicate both of this math node
change this to sine then take the result of the radius and connect it to multiply then take the
result of the rotation angle and connect it to sine then output this result to y-axis and now
it is too big let's reduce the value here to 0.08 and the sample count increase to 19 we can still
play around with this value later after we clone the petal onto it okay now we can start to clone
our petal so let's go to set position then add instant on point node after the set position
then go to the wrinkles section grab the set position for displacement map and connect it
to the instant on point okay now i want to rotate the petal and make it facing outside
like what we did in the previous video so to do it let's add a rotate instant
put it after the instant on point then add a line euler to vector change the pivot to z-axis
connect it to the rotate instant then add a position node connect it to the vector
okay then duplicate this rotate instance put 40 degree for the y-axis then i want to turn
the petal transform from big to small follow the point so let's add a curve parameter and
connect it to the scale in instant on point node then add a float curve okay then we can start
adjust the petal size okay then go back to the value decrease the value to 0.03 and then resample
count to 38 maybe you can experiment with this value yourself so this value is the scale of the
point and this resample curve is the amount of petal okay next i want to move the petals here
in the center slightly higher so that it won't overlap together so to do it let's go to the
set position this one duplicate the set position and put it after the rotate instance before the
joint geometry then add a position node connect it to the position add a vector map node duplicate
the vector map node change the operation to length then add them together duplicate the vector map
again change the operation to multiply put it here and now we can start to adjust the z-axis
okay then add the transform node after the set position move it higher make it smaller
okay then we done it let's put back the material put it before the joint geometry
and now we have done the cloning let's select everything here press ctrl j to frame it press
f2 and name it clone okay then i think we can make the pollen smaller let's go to the pollen section
this one so reduce the radius of this uv sphere put 0.8 maybe okay now we can start animate it
so go to the curve line for petal section this one add a mix rgb after the float curve
then select the float curve press ctrl shift d to duplicate it then connect it to the mix rgb
and now we can reset the curve select the curve here press f2 and rename this before bloom
then select this float curve press f2 and rename it after bloom so what i'm going to do is i'm
going to set two different shape for the petal so one of the shape here is the shape after the
flower bloom and another here will be the shape before bloom then we can adjust the factor here
to transform it so let's start to adjust the shape for before bloom adjust the factor to one to see
the result okay then let's add a group input connect the factor to the group input in the
geometry node editor press n to toggle the side panel go to group select the fact and rename it
blooming animation actually you can put whatever name you like it doesn't matter at all okay then
press n again to hide the panel then next let's go to the petal modeling section then we need
to repeat the same step add a mix rgb after the float curve then duplicate the float curve
connect it to the mix rgb slide the factor to one reset the curve and drag the shape we want
and now select this float curve press f2 and rename it before bloom and this one after bloom
then again add a group input connect the factor to the blooming animation okay then go to the clone
section here and now i want to rotate the petal so go to the rotate instance this one with the
y-axis 40 degree one let's move it higher so we have more space to rotate the y-axis let's add a
combined xyz connect it to the rotation then add a mix rgb connect it to the y-axis add a value
duplicate it connect both of them to the mix rgb adjust the factor to zero put 0.7 for this value
press f2 and name it after press f2 name this before then adjust the factor to one put minus
0.4 for this value so this before this after then again add a group input connect the factor
to the blooming animation okay then i want to make the size of the receptacle slightly longer
and make the radius smaller so go to the receptacle section here go to the curve line
and increase the end of the z-axis to 1.2 and the radius of the curve circle reduced to 0.8
okay then i want to add a mix rgb to the pollen as well let's go to the pollen section
here go to the uv sphere this one add a mix rgb then add a value node duplicate it
connect them together then name this after name this before drag the factor to one
and put 0.4 for this then put 0.8 for after okay again add a group input connect the factor to
the blooming animation okay next i want to make the pattern thinner now it is too thick let's go
to the wrinkles section this one add a mix rgb put it after the float curve duplicate the float
curve connect it to the mix rgb slide the factor to one then adjust the graph below slide the
factor to zero then adjust this graph as well make it thinner then rename this after rename this before
again add a group input connect the blooming animation to factor okay next i want to transform
the pattern from small to big so let's go back to the clone section go to the instant on point node
this one let's move all of this higher so we have more space then add a scale instant
put it after the instant on point and then duplicate all this node connect the mix rgb
to the scale instance then put one for the after put 0.6 for the before then again duplicate all
this node press alternate p to unframe it go to the seeper section go to the instant on point node here
add a scale instant after the instant on point then connect the mix rgb to the scale okay then
go to the modifier properties and now we can adjust this value to animate the flower okay now
we can start keyframe it let's go to the timeline move the time indicator back to zero then i want
to start the frame on zero and end the frame at 150 adjust this value to 1 right click and insert
keyframe move the time indicator to 60 adjust this value to 0 right click and insert keyframe again
okay then go to the graph editor press a to select all keyframe press numpad dot to focus it
then we can adjust the handle so now i want to delay the starting time of the animation for
the curve line for petal and i want the animation to end earlier before 60 frame so to do it go
back to the geometry node editor go to the curve line for petal section here let's add a math node
put it after the group input change the function to multiply then multiply 4 you can experiment
with different value to get a different delay time then go to the timeline again play the animation
to check the result okay everything looks good for me then duplicate this math node go to pollen
section press alternate p to unframe it i want to delay the animation for pollen as well so add the
math node here after the group input then check the animation again okay then i think we can add
a little bit movement to the flower so that it will look natural in the geometry node editor
go to group output add a transform node put 7.5 for the z-axis translation then in the 3d viewport
press n to toggle the transform panel then put minus 7.5 for the translation z-axis okay now
i want to rotate the flower so in the timeline press this button to jump to the first frame
right click the rotation x and add a single keyframe then drag the time indicator to 70
put minus 4 for the rotation x then right click again and add a single keyframe then now press
this button to go to the last frame put minus 1 right click and add a single keyframe then press
space bar to check the animation okay now we done it so if you like my video
please subscribe and see you in the next video bye
