How To Make A Wedding Bouquet ๐ Neutral Theme Bridal Bouquet Tutorial

Flower Arranging Art Short Videos
7 followers
Hello everybody and welcome back to my channel.
If you don't know me already, I'm Gem and I'm your new favourite florist on YouTube
and I am going to give you the confidence to make your very own bridal bouquet.
Whether you're new to the floristry community or you're doing a DIY project, whether that
be your friend or yourself, we are going to dig deep into this and I will show you everything
you need to know.
So today I'm making a large unstructured handheld bouquet and we have got a variety of eucalyptus
and we've got four types of eucalyptus, poplush eucalyptus, gunny, cinerea, baby blue and
then we have some ruscus to go with it as well and we're going for a green and white
theme with more foliage and the flowers and some neutral sort of white colours incorporated
in there as well.
Now to make the structure with a more like foliage based sort of design, I like to start
with the foliage.
I like to make the structure with the foliage so then it's easier to put the flowers in
and you know you're going to get the structure that you want.
So I'm going to start off with my gunny which is like a smaller leaf eucalyptus and I'm
going to be using the spiral technique.
So you basically just get one stem in one hand, pick up another one and put it in at
an angle so it's basically like a cross like this and then do a little bit of a turn, put
another one in and turn it, another one in and turn and another one in and turn and then
you've just got to build this up with all the other foliages as well so I'm just going
to go in with my baby blue foliage as well into the bouquet and just keep going all the
way around like this.
Now you can use different sort of foliages as well but I like to use eucalyptus in wedding
flowers.
I just think it's a nice foliage, it's associated with wedding, it's a nice smelling and you
can use all different types to make a good texture and structure within the bouquet.
And then I'm just going to go around with my ruscus then so it's creating a sort of
skirt base, the ruscus is, all the way around.
Now you can use less foliage, you can use more foliage to the sides of the bouquet that
you are going to make.
So this just adds like drama, all different areas just popping out.
And then with the poplar shoot eucalyptus, I'm going to do exactly the same but go around
so it gives like a nice draping effect and I've got five of these so I'm not going too
crazy.
But if you can see the bouquet is now going down in layers, sorry my phone's ringing I'll
be right back.
Ah the joys of running a small business on your own.
So anyway that's sorted so I'm going to carry on with my poplar, just a few more to go around
and then I'm just going to tie this lightly with some raffia, it doesn't have to be raffia
it can be some string as well or some polyribbon and just wrap it around the binding point
quite loosely so then you can just pop this down until you get your flower sorted that
you want to put in there.
So I've got some white Casablanca roses and now do be careful because sometimes I find
that they come, well some of them look a bit more of a pastel pink colour so I normally
just take those out and make sure that I am using the white ones.
On the camera just make it look cream but they're really really like porcelain white
in real life.
Then we've got some Fluffy Eustoma or Lizzies and then a whole lot of spray roses and then
please do make sure that you have taken the guard petals off all the spray roses, I know
it's a tedious job but it's so worth it to make it look as aesthetic as it can.
Then we're going to come to the other bucket and we've got some lovely Agapanthus, these
can be used instead of snowdrops because loads of people ask for snowdrops or Lily of the
Valley in their bridal bouquets and it's not available all year round so Agapanthus is
a good substitute for this.
Then we've got some white Veronica here and some lovely white Astilbe as well.
So let's get on to creating.
Okay so we don't want to go too overboard on the flowers because as soon as we start
adding flowers into this it's going to fill up really really fast and we don't want it
to look too over the top or too big for the bride to hold.
So I've got six of the white Play-a-Blanca roses then I've got three of the Agapanthus,
three stems of white spray roses and five stems of the Eustoma.
Now with the Eustoma I do like to divide these up into smaller units because each stem
does have a few sprays on it and you don't want it to look like really chunky within
the bouquet so I just like to pull them apart like that and use two different units to then
go evenly around the bouquet as well.
Then I have got five Astilbe, I have chosen the nicest Astilbe in the pack, I always do
the bridal bouquet first so that the bride can have the best items or flowers within
that pack and then we have got four Veronica's as well.
So then what I like to do, I just like to take the raffia off from where we tied it
earlier and then I just like to use my hand as a vase so I'm going to add in the roses
first.
So I'm going to start from the centre and then go around so you can just basically poke
them through all the way down to your desired height and then just go around with the roses
in layers.
Now with the bridal bouquet you do really want to hold your bouquet right at the top
quite tightly so it just makes like a sort of compact effect even though this is in a
the foliage is making it like that unstructured effect.
Because you don't want it to be too big and bulky so I'm holding it right at the top of
the binding point.
Then I think we're going to go in with our spray roses so just put these in between all
the larger headed roses and then maybe just one at the back here.
Okay beautiful then I'm going to fill in some of the gaps with this lovely white fluffy
eustoma and because eustoma comes at different levels so the buds sort of are above the actual
head of the lisianthus it makes lots of nice layers within the bouquet.
Okay beautiful and I think that's all the eustoma we're going to use because it might
get too big and I'm just going to add my stilby around.
Now do make sure that you're really really careful once you're placing the estilby within
the bouquet because the stems are really really fragile and you don't want them to sort of
dent or break because they won't get any water source there and you don't want your flowers
dying on your bride.
And then just our veronica as well.
Beautiful and then we've just got our three of our agapanthus now do be careful with these
because the stems are really quite thick so don't let them damage any of the other stems.
So I'm going to put one over there one over this side
and then one at the back as well not right at the back but between the foliage
just so it makes a nice sort of triangle shape so it's more pleasing to look at.
There we go now I am going to go and get some waterproof floristry tape and we're going to
bind this now. Okay so this is just some waterproof floristry tape which I love to
bind my bridal bouquets with and you basically just stick it around the binding point and then
get hold of the binding point with the other hand and then keep going around until it's nicely
secured. Now it's better to do this when it's resting on the table but for tutorial purposes
I'll do it while standing up. Okay just make sure that's really really lovely and tight
around the binding point. Okay that will be perfect and then you can just simply
rip it off like that. Okay then your bouquet is nice and secure. Okay then we just need to
cut the bottoms and we're going to tie it with some white ribbon. Okay so then I'm going to do
a stem check and make sure there's no foliage under the binding point just so it looks more
aesthetic. So that's all perfect and then I'm going to cut these down to my desired length.
I don't want them too long because you don't want the bride to be holding a bouquet with really
really long stems. Can you imagine with the stems this long? So I do like to cut them shorter than
I usually do so probably just about two hands widths like so.
Sorry if you can hear any of the noise. Now I do like to still cut these at an angle
so that they can drink water
because these are going to be sitting in water until tomorrow morning when I deliver these to
the bride but as soon as you do get them out of water you need to cut them really neatly at the
end so flat. So it's going everything against that I say that you have to cut the bottoms at an angle
for it to be able to drink but the stems need to be flat just so that it's nice to look at for the
and it looks really even. So there we go and then I'm going to add the ribbon now.
Okay so we've got some lovely white ribbon here and then basically what we're going to do we're
going to do a tiny little fold like this so it looks like a half cross. Put it on the top of
that binding waterproof tape and then keep our thumb on there until we come to the other side
like this and that just really secures it in place and then we'll just keep twisting
all the way down really nice and tightly so you know that it's not going to move
and then just put it down until this bit isn't showing anymore
and then just go all the way back up so this has to be your neatest layer.
Okay and then when we reach the top like so I'm just going to get my ribbon scissors
and just cut it here and then we're going to fold the ribbon back on itself and then
to secure it we're going to get some pins I always use like the ivory pearl pins I think
they're the best and then just stick one at the bottom and then make sure it goes through the
stems this can be actually quite tricky it's quite hard to get the pin in there okay that one's not
going to go in I'll come closer to you so you can see. Okay so just to show you again I've folded
the ribbon in like this and then popped it back onto itself
grab a pin and hopefully this one will work yeah fabulous and then another one at the top
yeah perfect and then your bridal bouquet is nicely secured just make sure that's really
neat there and then it looks like this and there you have it your beautiful bridal bouquet
and then I'm just going to leave that in water for the night and then that's good to go in the
morning to its bride. Thank you so much for watching guys I hope it was super duper helpful
for you and you've got the confidence to now make your own bridal bouquet if you did have any other
questions just give us a comment and we'll get back to you don't worry about it we love hearing
all your questions and getting those answered for you and please don't forget to give it a
thumbs up it really helps support our channel so we can keep making videos like this
and subscribe and we'll see you in the next one.
