I MADE A NEW AQUASCAPE FOR MY ALIEN BETTA! Full Step By Step Aquascape Tutorial

Fish for Talks
2 followers
Welcome back everybody, hope you're doing well. In today's video we're making a new aquascape for my
alien betta. Recently because of a mistake that I made I kind of had to destroy his tank.
He deserves much better so let's get started.
So this is the current situation of his aquarium. As you can see it just doesn't look very good.
Basically what happened was a few weeks ago I temporarily had to re-home a small group of
ember tetras. And this was kind of the only aquarium that had space so I placed them in here
thinking that would be fine they would all just get along. But you have to understand that Mr.
Alien has been in this aquarium by himself for the past six months and he only had a few
otocinclus and some shrimp as tank mates. So basically he had the whole tank to himself.
So he definitely did not enjoy this new company. His fins were constantly pinched together.
It wasn't really just... I could just see from him that he wasn't very happy so I decided to
just quickly remove the ember tetras. And by doing that of course I had to kind of destroy the layout
because it was very difficult to catch them. Yeah that's kind of the short story why we are
rescaping this tank. It's been up and running for six months already so it's kind of time for a new
layout as well. So my plan is to do this rescape rather quickly and hopefully have Mr. Alien back
in his new aquascape within a few hours. So I'm going to take him out place him in a little jug
with some water and then while I'm doing the rescape I'm going to reuse most of the substrate
and I'll also keep the filter running on a different setup in the meantime. So hopefully
this way we can keep a lot of the beneficial bacteria alive. We don't really have to start
the cycle all over again and we shouldn't really have to worry about an ammonia spike.
He is not happy but it's only temporary buddy. So let's actually place him on the shelf I think.
Just so he's away from all the noise and all the vibrations. So I'm just going to keep him here.
Okay Mr. Alien is over there. Filter is up and running over there.
So now we can really get to work. Let's start taking this tank down.
Here we go. All clean. Ready for a new layout. So just a quick recap of what I did. You guys first
saw me remove all the plants and remove all the hardscape. After that I caught some of the fish.
There were still two Olysynchus and two Amethystas in there. As well as a few shrimps. So I removed
all of them. Then after that I filled the tank back up with water and kind of cleaned the glass
a little bit. Cleaned the substrate a little bit and then I siphoned out all that dirty water.
And as a last step I kind of cleaned up the edges of the glass. There was quite a lot of
these hard water marks or like calcium stains. So I took a little bit of vinegar. Didn't really
work. So I took a sharp blade and kind of went to town on those mineral deposits.
So now the tank is looking pretty clean again and ready for a new layout. So what we have here is a
35 liters Capers tank from Dennerle. And for all my viewers from the US I think this tank holds
roughly 9 US gallons. I'll put all the exact dimensions on the screen. Then the light is a
Blade Freshwater from Aqua Illumination. Still quite a new light. Hasn't been released that long
ago. I'll put all the specs on the screen as well. Then in terms of other equipment. Of course there's
going to be a beta setup. So we're also going to use a heater. Then earlier you already saw that
small external canister filter. That down is from MiniCompleteTank. If you want to know more about
it I'll leave a link in the video description. But you can also watch the previous beta build
video. In that video I talk more about that mini filter. And then we're going to use CO2 as well.
And for that we're going to use this DIY system that I reviewed a couple months ago. It's been up
and running yeah the entire time. Up until now basically. And it was still pushing CO2 out. So
it actually lasts quite long. Not sure how long but yeah a couple months. So we're going to use
this one. We're going to empty it and refill it and use it again. So there's two things I want to
try for this new layout. First of all I want to try to create a nice aquascape with mostly red
plants. I already made a sort of like a red plants dutch starscape a long time ago. It was quite nice.
Didn't really work out as I had intended but still looked pretty good. The second thing I want to try
is this plant right here. The Utricularia graminifolia. I think this is one of the most
difficult freshwater plants. I tried it once. Didn't really work out. But I think with this new setup
I'm gonna give it a go again. So we're gonna have a green carpet in the foreground. And then behind
that we're gonna have mostly red plants. And then for the hardscape I'm gonna be using black lava rock.
So my idea is to have a lot of red plants and have a really dark contrasting black lava rocks.
And then a blue Mr. Alien kind of swimming in between that. So I think that's going to look
really good. Let's give it a try. We already have a decent amount of substrate in the tank.
And this stuff is full of beneficial bacteria. Later on I'm going to cover it with more aquasol.
But I think I first want to start working on the hardscape. Once all the rocks are in we can cover
it with a nice fresh layer of aquasol. I have to be honest with you and say that at this point I have
no idea what I'm doing. When it comes to making a rock only layout I'm just not very good at it.
I like using wood and rocks. But sometimes you just have to step out of your comfort zone and just
do something else. So I'm going for a rock only layout. And I'm just placing things in. Just seeing how
they look. And just making adjustments as we go. So right now for example this big rock is kind of
tilting that way. While all the other rocks are more going that way. So I think if we just move
this one more in this direction as well. See that already looks a little bit better. But we're still
far from the end result. So let me just get a little creative and hopefully I can come up with something nice.
Here we go. I think that looks pretty good. On camera it does look a little bit flat. But I think
once we add in more substrate and we keep that elevation towards the back it should look better.
Now at the moment I have quite a big rock. Quite a large rock supporting this one. And that leaves
very little room for planting. So I think I'm going to swap this one out for a smaller one.
And then we should be good. Okay hardscape is done. Pretty simple but I think it looks nice.
Especially once all the plants are in and kind of the idea that I have in my head. I think it's
going to look really good. So the next step is to add in more substrate. Because the current substrate
layer is quite dirty. It's quite dusty as well. So it's just nice to cap it with a fresh layer.
Just to keep it clean. But also to add in a little bit more nutrients. I mean this current substrate
layer is already like six months old. So most of the nutrients are kind of depleted. So it's just
nice to add a fresh layer. And the first layer I'm going to be adding is this stuff right here.
This aquasol from Dennerle Plants. They've actually released this a few months ago. So it's still
quite new. This is the first time I'm going to be using it. So yeah very curious about the results.
Okay substrate layer is in. It's looking good. So that means we can now move on to planting.
Of course as always plants for this project are sponsored by Dennerle Plants.
And besides the carpet I've basically selected plants that will grow a reddish or a brownish tint.
So let's see. We've got this one. I've been using this one a lot lately. The Crypt Legoi.
Some of these are like light brown. We have some Hygrophila Araguaia. Hygrophila Pinnatifida.
Of course the AR Mini. Very curious about this one. Bucephalandra Aurethoscorpio.
Never used this one before. And then I've got two stem plants as well. The Rotala Aetra
and Ludwigia. Plus this super red. Let me just quickly prepare these plants and then we can start
planting. This is such a unique plant. Yeah fingers crossed this plant will work. I'm not very
confident about it. But I think this is what this plant is very... It doesn't really like nitrates.
So we have to keep the nitrates very low. So yeah let's just let's try it out. Okay plants
all prepared. And I also just took a few minutes just to make like a little planting map. I wasn't
entirely sure yet which plants are going to go where. And yeah these labels just really help me
find the best location you know. Okay let's start with the UG. Now my initial plan was to just have
it in the foreground. But I'm actually thinking to have it going all the way in the center all
the way towards the back. I think that will actually look pretty cool. Now I was told to
plant them quite deeply because they really tend to float up. So that's what I'm going to do.
And I was also wrong about what I said earlier about this plant not really
tolerating nitrates. That's actually not true. Apparently they just don't like ammonia. So
hopefully because we already have the you know established filter. Because we already kind of
have the established substrate. We shouldn't really have any ammonia spike in here.
Okay so that was one pot of the UG in. Let's move on to the Crypt. So this one is not really like
red or anything. But after a little while it will turn a nice brown color. Just for some nice
details. Okay then we have a little bit more space to the sides. Just before we get to the
background stem plants basically. And then I'm going to plant the Hygrophila pinnatifida.
Now normally this is mostly used as an epiphyte. But it actually does
quite well if you just plant it in the substrate as well. Okay now over here I have a nice gap for
the Bucephalandra. So this is the Bucephalandra red Scorpio. Very curious about this one. And
lastly of course we have our stem plants. So we'll do the Ludwigia super red first. Now this one came
from the pot. So it's actually quite long. Most of the other plants were in vitro. So they're very small.
So it might look a little bit silly in the beginning. But yeah this plant will actually
provide some cover for Mr. Alien. Which I'm sure he will enjoy. And lastly on the other side the
Rotala atria. So same thing. Quite long at the moment. But that's actually good. Let's close the
light so it will start growing fast. Just to get the aquarium balanced again. Okay planting is done.
Of course looks a little bit rough right now. But I think in a few weeks from now this is actually
going to look pretty cool. Of course if everything works out and nothing starts melting. Everything
is quite densely planted. So that's good. Apart from the UG. I've basically just used one pot.
I do have one more. But I'm thinking to kind of keep that one. Reserve it. And if something goes
wrong with this plant I can always take it out and replace it with a fresh one. So I think that's it.
We can now move the aquarium back into the corner. Fill it with water. Install all the equipment. And
then in a few hours I can release Mr. Alien into his new home. Hopefully he will like it. And then
within a few minutes you guys are going to see how this aquarium looks three weeks from now.
Well you really can't make this up. The one time I don't glue my hardscape together I end up with a
floating rock. Of course I kind of knew that this would happen. I mean lava rocks are just very
porous and sometimes you get some air trapped inside them. And then this happens. We can fix it
though. I'm just going to place a rock on top of this rock. Okay fast forward. It has now actually
been two months since I've rescaped this tank. So normally I like to wait two maximum three weeks
before I kind of finish the video and show you guys the end result. This time it took a little
bit longer because I had to wait for the UG carpet to grow in. And that has been a real struggle.
The problem with this plant is that it doesn't grow any roots. So it's super delicate and
like any small motion can already uproot it you know. So it's been a real struggle. And right now
it's coming close to getting a full carpet. But I actually don't like it anymore. I don't like how
this plant looks. So I'm thinking of taking everything out and actually replacing it with sand.
So as you can see we have a decent clump here. I've actually trimmed that a few days ago.
But over here on the side it's still not really dense. On this side as well you can see that it's
also like just becoming deattached again. And over here on the left side there's actually some
blue green algae mixed into the the carpet as well. So it's just not doing great. And also
like the color. I don't actually like the color of this plant. It's very light green. Almost more
close to yellow. It just yeah it just doesn't really look that good in my opinion. And what I
do like about this scape is these two rocks over here. As you can see they kind of got completely
covered in pheasants moss. I did not expect that to happen. But these rocks were actually used in
a previous layout. Some of my long-term subscribers might remember it. And that layout was completely
filled with pheasants moss. And even though these rocks were outside for like a whole year
somehow the moss still survived and started to grow back. So that's pretty cool. It's now also
starting to spread to some of the other rocks. You can see a little bit in the back over there.
Some of it on this rock over here as well. So that's pretty cool. Okay let's do this. Let's
remove the UG. I'll siphon out some of the aquasol as well. And then we can replace it with sand.
Well this might seem like a bit of a waste to some people. But the UG was very much just an
experiment. I mean now I know how this plant grows and what it needs. So I can use this
experience for future projects. Yeah I think it will just look much better with sand as well. So
that looks so much better. Really really happy with that. I've also added some small gravel
just for a little bit more detail. So basically that's the aquascape done. The only thing I want
to do now is I want to give Mr. Alien a few more friends. I mean he didn't enjoy the company of the
amber tetras. But sometimes I do feel like he's a little bit lonely. I mean he has the whole tank to
himself. It's quite a big tank as well. So I want to add in a few shrimp. Over here I've got a small
group of the green jade neocaridina shrimp. So they're like black almost green. I've used them
as well in the XXL phase. And I think they will suit this aquascape as well. He's not going to
eat them. He's just gonna, he will maybe try chasing them. But he's not going to eat the shrimp. So
they'll just kind of keep him entertained I guess.
So that is this build video completed. Really hope you guys enjoyed this one. As always don't
forget to smash the like button, subscribe, hit the notification bell, all that good stuff.
Thanks for watching. See you next time.
