Big Aluminum Pot Making Process | Iron Pot | Picabolo Tv Gh

Traditional Metal Crafting
21 followers
13 Video Views·Oct 27, 2025
This is the process of making aluminum pots in ghana.
Hi, today I'm going to show you how aluminum pots are made in Ghana. First sand is filled in the pot
and it is pounded to make it more compressed.
So as you can see the pounding is being done with this simple stick to make the soil more
compressed. Now after this, a stick like this which is heavier is used to hit on the sand
for the same purpose. Meanwhile someone too will be watering the sand that is
not being used in the moment for future use.
The particles of sand or loose sand is cleared after the pot has been opened like this.
Then the pot is placed back. The same thing is done for the other side.
The pot is removed and then the bottom part of it is cleared of all loose sand.
Then the pot is placed back. Now this sand is poured around the pot to prevent sticking of
the soil down there with a new processor to be done. Then an aluminum
metal or aluminum is placed in between like what you see over here.
The next step is putting the box around the pot which is to be filled with sand also.
This other guy on the left side makes sure he adds sand and water to mix in the box.
This will make the mold or the sand to stick in the box after it has been filled.
So now the box has been placed around the pot and it has to be filled as you can see.
Whilst filling is being done, the sand is pounded to make it compressed.
This is where they have filled everywhere and the hole is made on top of the soil.
Now after this has been done, the upper part of it is removed.
Now as you can see the upper part has taken the
shape of the pot and the mold of the right side has been removed.
After both sides have been removed, something like powder is poured on the pot
and then inscriptions are made if any. So this is a size 50 pot. That's why he has written 50 over
there. After all has been done, the mold is put back. So now you can see that the aluminum pot
has been removed and now we have some space around the bowl which they filled at the beginning.
So that is the space that will be containing the liquid aluminum to form the new aluminum pot.
At this stage, you have to make sure that the molds meet correctly so that the aluminum
liquid does not slip through outside. Then the top is used to cover it.
Meanwhile, the aluminum is being melted outside with hot fire
and preparation is made to the sand to welcome the aluminum liquid.
The aluminum is now melted and ready to be poured into the hole. Very very hot.
At this moment, all foreign matter is removed to make it clearer and cleaner
which is the mold. At this stage, two strong guys are made to hold
the mold in place. This is to prevent it from splitting or forcing the mold to break apart.
So now that it has been poured in, the sand around it has to be removed
to reveal the new pot that has been made.
And the bottom part is also removed.
The care is to be taken so that sand does not enter into the place that has the aluminum.
Then all the sand is to be removed.
At this point, the upper part of the mold is removed and the pot is revealed.
Now the molds are open and the sand also exposed. So you can see the pot clearly now.
That is the new made pot. So now our aluminum pot is ready. At this state, it is very very hot.
All they have to do is to pick it up, turn it upside down, remove the sand from it,
and wait for it to cool down. After which, the body is chiseled to make it smoother.
Thank you guys for watching and if you have any questions, don't hesitate to ask me
in the comment section below. Don't also forget to subscribe to the channel
as I'll be showing you how the smaller ones are made. The smaller ones are quite easier to make
I'll also show you how the same process is used to make cold pots.
