Restoration Of Vintage Bead Roller | From Rust to Shine
#beadroller #restoration #restorationvideos
Restoration Of Vintage Bead Roller | From Rust to Shine
In this video I am restoring a rusty bead roller. I bought this bead roller from a flea market. Many parts of this bead roller are not made correctly.
To restore this bead roller, I started by disassembling every part.
Each piece was covered with old grease, which I completely cleaned off.
After that, I used a paint remover to strip away the old paint from the surface.
For removing rust, I used vinegar, and to make the process faster, I added electricity to the setup.
Once all the parts were rust free, I focused on the main body of the bead roller.
It had several casting marks that I removed using a metal file and a pin grinder.
After smoothing the surface, I applied filling primer and painted it in Ford Tractor Blue.
All other paintable parts were finished in the same color.
The parts that were damaged were repaired, and those that couldn’t be repaired were newly made.
Many of the metal parts were nickel plated, and a few received a cold bluing finish for added protection.
This bead roller didn’t have a handle, so I made one myself using a beautiful piece of wood.
I fitted a brass bush inside it and shaped it into a smooth, elegant handle.
After restoring, painting, and finishing all the components, I reassembled the bead roller completely –
bringing this old machine back to life once again.
Work I do in the video and what I use . If you want to ask any question, please ask in the comment section. I read everyone's comments and try to answer.
Subscribe for more of my content. I'm uploading videos about Restoration.
Thanks for reading the description and thanks for watching