21' Awning Install On My DIY Off Grid Skoolie

Enjoy RV and Van trips
18 followers
Oct 20, 2025
This video is sponsored by Lippert. We installed a Lippert awning on the bus in preparation for a Winter off the gird.
Hey everybody, this is Chris from the Off Grid Skoolie.
Behind me you see my bus, Zep2.
Today we are going to be installing an awning from Lippert.
So this upcoming winter, my girlfriend and I are going to be living off the grid in northern
Wisconsin, and we really wanted to have a little bit of outside space.
We don't want to be in the bus all the time, so we wanted to create an outside space with
the bus, and obviously having an awning in very cold temperatures will be very beneficial.
So today, Wes and I are going to be installing this awning, very excited to get it installed.
If you guys didn't know, you can actually cut aluminum with just a standard carbide
wood cutting saw blade, it cuts right through aluminum, no problem.
Alright so first of all, I'd like to thank Lippert for providing the awning.
So with the bus, it's awesome to have basically double the square footage of the bus on the
exterior.
Now I really haven't spent too much time outside because a lot of times it's in the desert
and the sun just beats down on you all day.
Now with this awning, we have a lot more exterior space to hang out and just enjoy ourselves,
as well as providing a cool breeze through the windows on this side.
So very stoked to finally get this set up.
I'm excited to get this bus up to the land in Wisconsin for a winter off-grid and see
how the awning does.
Thanks again to Lippert.
So we got the install finished today, and actually it went really well.
I started by putting one arm up, thinking I kind of knew what I was doing, but I thought
I would go ahead and look for a video online to see if I could find an instructional installation
video and found a really great video for that.
And after that, it made it very seamless.
We put the upper rail in place and the whole awning slid through, no problems whatsoever.
Attached it on the other end and basically screwed the other arm to the bus and everything
worked out great.
We wheeled it out and we've got instant shade.
Got the job done.
Worked out really well.
