Inside Our New Ocean Cleanup Headquarters: Expansion and Future Plans

Protecting The Environment
106 followers
Welcome to 4ocean.
My name's Alex and we employ captains and crew around the world to clean
plastic out of the ocean. In today's video,
we're going to give you guys a sneak peek preview of the 4ocean cleanup
headquarters, as well as our expansion.
We're going to walk you guys through the ideas,
the game plan that we have for this new space and really what we plan to do
right here in Southwest Florida. We're in Southeast Florida. Where are we?
First things first, welcome to the new expanded area of 4ocean.
I am so fired up to get this unit guys. I'll give you a little bit of history.
We have this unit over here, so you can see we just busted the wall through here,
but we had this space over here since 2017.
This was our first cleanup headquarters, first cleanup location.
We had this bay. We've been waiting for a very long time for this to open up.
This space just opened up. We had our neighbor, Will from Diamond Marine.
They were great neighbors helping us to service our vessels.
They ended up getting a new bigger spot.
So this became available and we jumped on it. We said,
we've got to take this spot. We wanted to punch a hole through the wall.
So we have access to both facilities and this is going to be amazing.
So we just got the, we just got the space. We painted the walls,
we painted the floors, we've got our electric run and now we're all set up.
So the vision for this side is really to store assets.
So store all of our vessels and all of our equipment and also have a plastic
recycling workshop. So along this wall,
we're going to build out a container or a small room,
just something that can be air conditioned,
have a front glass panel and store all of our equipment and our machinery.
We're going to get everything that we need to recycle plastic and put it along
this wall. So super stoked to get this spot. This is a, this is a game changer.
We've really been waiting for years because we've been cramped into this one
unit over here, but we just got this. So come on over.
We'll show you guys the original four ocean shop.
So we're still going to run all these wires and finish everything up.
So full transparency, this place is an absolute mess.
We've got everything everywhere. We've been moving and grooving,
packing all the stuff in,
trying to accommodate and get the assets taken care of so that we can move our
stuff over here. But come on up. We'll give you a, give you a quick tour.
This is the setup. So we typically have come in our bay door.
We've got our trash documentation station.
This is where we weigh and sort all the plastic and document our cleanups
each and every day. We've got all of our racks for all our scuba equipment.
This is all our dive gear. Our Halcyon equipment, OTS,
ocean technology systems, the blue dive systems.
We really just have everything stored here. Like I said, a little bit of a mess.
We've got stuff all piled in because we're, we're moving and grooving,
but this place is going to be dialed in.
Back here we have some of the recycling equipment that I was talking about.
So we've got our standard. This is our baler. This is our shredder.
We've got a ton of our equipment back here and this is, you know,
cleanup gear, nets, all sorts of stuff. Here's a little glory here.
We've got a 25 LS Carolina skiff.
This is the boat that we've been spending a ton of time on and getting it
dialed in for the cleanups. We've got the Can-Am.
This is the HD 10 is a Can-Am defender. A big shout out to Can-Am as well.
Sea-Doo, they're amazing partners of ours as well. All the tools right here.
And a lot of this is our plastic equipment machinery, right?
We've got some handheld shredders. We've got some, some sorters,
got a vacuum compression, polisher, Sanders, lit even little,
a thermal? I don't know. It heats up.
That's all I know, but we've got all sorts of stuff.
And so what we're going to do is we're going to take this and put it on the
other side. So we have three places here. So we have our main office,
we have our tool room.
And in the back we have kind of a conference room that we've built out.
So let me show you this back here. This guy, we just finished building out.
This is kind of the work room. We've got the whiteboards, the maps,
TV on the wall, all our stuff here.
This is where we're able to come and work and get some stuff done and you know,
duck out of the heat. It's a nice little AC area.
So now let me tell you about what we're planning to do with this place.
So when it comes to the shop,
we haven't been able to really prioritize.
I'd say the organization, the space,
because we haven't had it right.
Everything has been so cluttered and so crammed together.
But now that we have this new facility,
we're going to be able to spread out,
organize everything in a really clean and detailed way.
And I can walk you through kind of a vision of what we want to do.
Whenever we do a cleanup, I want to tell you how it all starts.
So the cleanup happens out in the ocean. We come back and we offload.
So we're going to offload our bins.
And what we're going to do is we're actually going to move this weighing
station over to the other side.
We're going to try and keep that side material processing and this side,
more vessels, maintenance, vessel storage,
and really taking care of the gear and the equipment. So, uh, out front,
what we have is our standard area here.
So what we're going to do is we're going to build up front.
The vision here is I want to build a lockable pressure washing station station.
And so this is going to be a pressure washer.
That's always ready on a big reel where we could put, uh, the boat wash,
the foams, the salt offs,
all the equipment that we need to clean the gear and maintain it is going to be
stored here. Then we're going to build out a station,
almost like a fillet table type, uh, rinse station.
So when we come back with our gear, we want to be able to rinse it, dry it,
all the scuba equipment, the blue systems.
So we're going to have a little dunk tanks.
We're going to have a little drying racks.
We're going to develop a nice storage thing here in between these two
facilities in this big area, we're going to put a big shade on it.
So what this is going to be is it's going to be a, I got 20 by 30 tent,
something comparable to how he has right over here.
He's got a smaller version of it,
but we're going to put like a 20 by 30 tent right here so that when we're
coming back, we're sorting through plastic. You're not sitting in the hot sun.
So like right now we're out here for a couple of minutes and you're just
already just starting to sweat.
So this is gonna be nice to be a tent shaded structure.
We're going to park our vehicles under it, uh, over the weekend or at night.
And we'll be able to sort, put some big fans out here and we'll be dialed.
So this will be a sorting,
a rinsing and a washing station out front to prepare all the gear.
Then when you come inside, we're going to reset up this area over here.
So starting out from the corner in this corner,
it's going to be the wash station. So we're going to store deck brushes,
sponges, uh, the, the wash mitts, the soaps,
everything that you need is in store on the wall here.
So that way you can take it, use it to wash the gear and move in.
Then we're going to extend and build a bigger table set up here. This,
this, uh, Wayne documentation stations going to the other side.
This is going to be a larger table.
We're going to have a computer set up for our trash tracker entries.
We're going to have all our charging units. So if you can see here,
this is all of our, our charging and all of our gear that we use for the blue
systems and the dive scooters and stuff like that.
So this will be more of a workstation area to prep gear.
We're going to clean all of this out, get the tanks stored on the racks,
get this back to the way it should be.
We're going to finalize it and actually throw some cool lighting up under here.
So this, this, a quick second about this rack for me,
I did a lot of research on how we wanted to store our equipment effectively,
make sure that everything has a home and has a place right now.
It's a little, a little place because we've been in moving in transit,
but when we have it all dialed in,
everything has its own place and you can hang it up to a to dry be,
you know exactly where your equipment is every time.
But I really wanted to look at how can we create like cubbies.
And when I was doing research,
I created kind of like a little mood board vision board. So I had like,
you know what firefighters use for their lockers and cubbies.
Police officers, what they use for their cubbies,
sports teams for their cubbies. Even like, you know,
like I literally looked at like the Batman, you know, the Batman style,
how they have all this stuff drawn up.
And so what I did is I put all these photos together.
We envisioned this and what was the end goal was this unit.
So we built it together. Tony and myself, big shout out tone.
He crushed it, helping me. And and we put this together.
So now we have a storage for all of our gear and everything has a place.
So all the dive gear, ocean technology systems, the blue, our scuba jet,
the Halcyon dive scooters. There's just, there's a lot here, right?
So now what we're going to do here on this wall is this is going to be our net
storage. So nets are typically like leaning up in the back corner.
And so what we're going to do now is we're going to sort the,
put them all on the wall, nice and clean with our, with our rod holders.
And so that'll be ready to go at a moment's notice. You want to pack up,
you've got to go on a cleanup.
You're going to come right here and grab all your gear.
So we're going to have a larger nets, smaller nets, clean up tongs,
these little what do they call them? The trash tong sticks or trash chopsticks.
And then our cleanup bags. Then here,
we're talking with a potential partner, a lev rack.
They are an incredible storage solution. You guys got to check them out.
It's basically a comparable pallet rack with slidable shelves in them.
And they're unbelievable for storage and they keep all your stuff super
organized.
So we would have like a workbench here and then storage to the rest of the end.
And that's where we're going to put all these tubs with life jackets,
flares, fire extinguishers, cleanup gear, all that.
It's going to be organized in these, in these bins, nice and clean labeled.
So that you know exactly where everything's at on the table.
We're going to have a table right about here.
That's where we're going to store the pixie drone.
So the pixie drone is that remote control you know,
plastic collection device. So this is a,
it's essentially a Roomba for the ocean. That is a remote controlled unit.
That's going to go. We're going to store it somewhere here.
We believe we're going to put the scuba tanks all stored underneath the bench
pixie drone on top of it.
And then we have a long top rack that we can put our dock boxes and all our
other gears. So all of this will be nice up against the wall,
clean and we'll be able to back the vessels up and take them out at any time.
Everything that we're designing in the shop is for a order of retrievability,
right?
You want to be able to get your gear in a mat in a, in a second,
get it and get out in the water and not spend a ton of time fumbling around,
grabbing a bunch of stuff. And, uh, and we've made a lot of progress on the shop,
but you know, I got to give a big shout out to Tony. Uh, you know,
a ton of people have come and work on the shop and helping to make it into what
it is today. And, uh, and we're, we're, we're making some great progress.
So we're going to keep grinding.
Let me talk to you about the tool section over here.
So right now what we typically do is we'll have our vessels and equipment
backed up to here. So we're going to get rid of all this in the back,
no racks, nothing. It's going to be wide open, complete open back wall.
And all we're going to have is a couple of floating chargers.
So these are gonna be chargers on reels that when we back up, pull the reel,
plug it in, keep everything on trickle charge that it's ready to go.
And all of this will be moved to the other side and stored on pallet.
So now when we have equipment back here,
we need to be able to service and maintain our gear, right?
So we're doing oil changes. We're doing, you know, adding different products.
We're just constantly working and tinkering on the boats always when you're,
when you're running a full time operation.
So this is going to be turned into more of the maintenance and tool section.
So on the right here, I'm going to put a big pegboard up.
So white pegboard is going to go across this whole thing.
We're going to have all those tools that are in there are going to be all
organized on this wall right here.
We're then going to have all of our electric power tools and everything that we
need, uh, on this wall.
And then we're going to leave a space over for some larger equipment,
some drill presses, uh, potentially a little bit of other machining,
uh, equipment and really just get it set up in a way that we can function and
operate and really maintain our gear.
So all these will be elevated a little bit more.
We need 37 inches of clearance to fit all of our tool benches under.
So we're going to have, uh, drawers and storage underneath these bins,
big white pegboard, all the tools organized and a nice lean workbench,
nice and clean, baby,
ready to go at any time and make sure all of our stuff is ready.
So, uh, the back room is going to stay the way that it is.
So this back room is going to stay a conference room.
We're going to just make some improvements and clean up that entryway.
But this, we're actually going to convert this back into an office.
This was originally an office, but we took the doors off and made it a tool room.
But to be honest with you, once we get those lev racks,
we can store 60% of this stuff in a way. Cause right now it's, I mean,
look at this, like it's, it's, we're running out of room.
We're back to the gills, right? And to try and get some of these things,
it's just, it's a nightmare, right? You got too much stuff.
We're on top of each other. Now that we can spread out,
we're going to reorganize everything and put it into these storage solutions.
And now you don't need an entire room devoted just to this.
We're going to spend time and convert this into an office,
get a mini split AC system and, uh,
and be able to have people come and work out of the station and have a nice air
condition area.
The next thing that we want to do is we want to turn this into a podcast studio
slash air conditioned room office.
So one thing we're going to be doing is we want to start the podcast.
We want to bring guests out.
We want to invite people down to come hang out at the shop, uh,
rock the mic, do a podcast, have a great time, talk about the cleanups.
And in an ideal scenario, we want to take people out on cleanups, celebrities,
athletes, influencers, ambassadors, guests, customers, partners,
anybody come out, experience the cleanups with us, come back at the shop,
see us clean that plastic, process it, see what happens behind the scenes,
and then be able to do what we call kind of doc talk, right?
We used to always do it where we'd get it back in from a cleanup and we'd talk
about, you know, what did you see? What did you feel? What, like,
what did you,
what did you think that day was going to be like and how did it turn out?
So this is going to be a comparable thing where we can invite people back in
and hang out and let's check out the space next door.
And we'll tell you what we're going to do. It's a blank canvas.
It's a blank canvas that we're ready to paint.
So what we thought about is I mentioned,
we want this to be a plastic processing area. So we want to have gear storage,
plastic storage, plastic, uh, weighing documentation, and even recycling.
So because it's so hot, we can,
we really struggle to operate and work with some of the plastic because of the
humidity, right? Uh, when it's too humid,
you cannot use certain levels of recycling that we're trying to do.
So with epoxy and different things curing.
So what we want to do is I'm thinking of a container unit so that I've seen
some containers out there that they've done these custom modifications.
Like I said, we're trying to do a scrappy.
We don't have a ton of money to invest in this thing and we've got to,
we got to get resourceful.
I've seen container units where you can buy for a couple thousand dollars and
put a 40 foot by 10 foot section here.
And what we'll do is the front panel will be glass.
So it'll be kind of wide open and have a nice open feel.
But on the inside along this entire wall is going to be work benches.
And that's where we're going to have all that material,
all the short, the plastic recycling equipment.
It'll be another recycled air conditioned space that people can work.
And we can also store some gear on top of that.
We're going to put pallet rack storing across the back of the whole unit.
And then the middle, we're going to leave wide open.
And one thing that I really want to do with this space is we're going to have
foldable chairs, foldable tables, and we're going to be able to host events.
So both for our company internally, we want to do like corporate events, right?
Once it cools down in the, in the winter time,
we're going to be able to do a team lunches.
We're going to be able to do our all hands meetings here.
We're going to be able to do, you know,
just different culture building things that we want to have everybody come and
experience you know, the, the,
the celebrations and the wins that we've shared together.
So we'll set up big farm tables and you know,
we'll cater and have some food and eat lunch together.
But also we want to invite the public out here.
One thing that would be awesome is to do educational based events.
We're thinking even like art and,
and creative type events where people can you know,
they can come over and we can do build different things out of the plastic and
just look at different ways that we can educate people on ocean plastic and get
involved.
Because one thing that's super cool is if you go out there,
clean up a bunch of plastic and then you make something with it,
it's going to be very memorable and you're definitely going to resonate pretty
deeply with the impact that plastic has. So we're really excited. This is,
this is, this is feels good. I gotta be honest with you.
I've literally for my entire life, ever since we started for ocean,
I have my old vision board.
I literally had my a whiteboard that I had at my old house.
This is going on 10 years ago now, nine years ago,
before we portion really started and we opened the business I have on there,
like the dream for ocean shop. And, and so I still have that whiteboard.
It's covered in dirt and soot and everything. It's been in my storage unit.
And right now it still is written on there. Ironically enough,
it not only says dream for us to shop, but it also says for ocean pontoon.
When we first started for ocean,
we didn't have any money to be able to buy boats or assets or things like that.
And the most affordable option I was looking at little $3,000 pontoon boats that
we were going to buy, paint and convert.
So that's just a really cool thing to see. But we're, you know,
we're getting there. This is a small step. We still got a lot of work to do.
It's going to be hot. It's going to be difficult,
but I'll tell you what,
everybody's determined and we're going to make this the coolest cleanup
headquarters that we can have. So thank you guys for watching.
I really hope you guys follow along in the process while we build out this shop.
If you guys have any comments that you want to want to see, any questions,
any background of our cleanup operations you want to learn more about,
let us know in the comments below and we'll take care of them.
But appreciate you guys watching this video, like comment, subscribe,
show some love. You're not only showing four oceans, some love,
but you're showing our legend captains and crews out there working hard every
single day, cleaning plastic. Thank you guys for supporting us.
We'll see you soon. Cheers.
