Beautiful 2-tier vase

Beautiful flowers
9 followers
Hi everyone, welcome to my channel.
You are now watching me make a chrysanthemum vase.
In front of me, this is a chrysanthemum tree,
which is very old but I don't know if it is still growing or not.
This tree is a combination of
lily flower and white orchid.
Now I will share with you
how to make this flower
and how to make a beautiful flower
for your chrysanthemum vase.
I will use a wooden frame
like this to make a vase.
Now I will take this frame
and place it to the vase.
I will use this tape to fix the flower
If you don't want to show the white tape, you can use scissors to cut the tape
You can use your hand to cut the tape
This tape is very flexible and very convenient to use
I'll put this one here
and I'll put the other one here
I'll put it on the top
The second leaf, we hold it close to the first leaf, it will be covered by the leaf, it will not be able to flow.
Here, we will start to spread it.
We will spread it along a curve like this.
I will use a pin to press it.
Here, I will use a piece of linseed that I have cut off the green part to make it less dense.
I will spread it down like this.
Here, we also put the clathema down here.
That is, it will go down a little bit.
And up here, we will also put those leaves.
We will put it on top like this.
Here, I will put it on top like this.
It will be more dense.
I will use the clathema.
I will cut the clathema.
Here, we will put three clathema.
We hold it with our hands.
And with the remaining empty corner, we will use the remaining leaves to make the clathema.
Here, we will cut the clathema.
We will cut the top edge and then we will cut the clathema.
Here, we will put another clathema.
We will put it here to make it very beautiful.
In the clathema, it will be very bright.
The hardest part is the middle part.
We will put it on the right side.
After cutting the clathema, we will put another clathema on the inside.
For the inside clathema, we will cut the middle part.
We will cut the middle part.
When we get to the bottom part, we will cut the clathema.
I have finished cutting the clathema.
I will put the clathema here.
After cutting the clathema like this, I will spray some glue to make the clathema more beautiful.
I will spray glue on the clathema.
I have finished cutting the clathema.
I will move to the flower part.
I will use the double-sided glue.
I will use the double-sided glue to put the flower on the top.
I will put a flower in the middle.
There is a flower that is a little bit narrow.
I will put it on the left side.
Here I have a white clathema.
I will mix the white clathema.
The water level is high and the flower is quite bright.
I will put it here.
The flower is very beautiful.
I will cut this clathema.
I will put a clathema here.
It is very beautiful.
I will put a clathema here.
I will choose the right size clathema.
I have cut the short clathema.
I will use the long clathema.
The more the clathema is cut, the smaller it will be.
I will glue it on the clathema.
The first block such long clathema.
The second should be cut short.
For the smaller clathema, I will insert a furry on it.
I will insert the furry to make this blossom.
I will insert the butterfly.
The butterflies will gather a little bit.
The part that we cut earlier still has the wooden part
like this
I will add more to make it less empty
Here we will put it here
I will add another one here
After going through the bottom of the pot, I feel that this part is still a bit empty
It's still empty
And this is also the work that I would like to share with you in this video.
This is really a bouquet with a very beautiful and delicate color.
Now I would like to end my video here.
Thank you for watching.
