DIY Mini Modular Moss Cubes (9 Worlds Terrarium)

Aquaspace & Terrarium Designs
32 followers
#terrarium #moss #serpadesign
This is how I made a custom DIY modular moss cube terrarium display.
🎥 Videos to Watch Next
Running Waterfalls in a Jar (Moss Terrarium)
• Running Waterfalls in a Jar (Moss Terrarium)
How to Propagate Your Own Moss
• How to Propagate Your Own Moss
Living Moss Brick (Satisfying and Relaxing Build)
• Living Moss Brick (Satisfying and Relaxing...
🛒 Materials and Supplies Affiliate Store (Earns Commission)
https://www.amazon.com/shop/serpadesign
Moss is my favorite plant. There's something so satisfying about its appearance and ability to
grow nearly everywhere. On a tree, in the sidewalk, underwater, and even indoors. When I realized
it's been over a year since I've done that, I got to work creating something special. A unique
display full of hidden features that showcases many species of moss side by side in nine distinct
There are around 12,000 known moss species worldwide, with 400 native to my state.
I estimate that there are at least 30 of those living in my yard who have been hidden under
a blanket of snow for months. With warmer days on the horizon, they're finally emerging from
their slumber. Most will remain where they are, while some will migrate into these terrariums,
which are one of the best ways to grow them indoors. A terrarium built around moss is
a mossarium. While I've made them many times, I knew that if I were going to do it again,
it would have to be unlike anything I've done before. When I came up with this idea,
for some reason my mind immediately went to a modular setup. I felt that these acrylic display
cases would fit that vision best. I was about to build an entire shelf around them and did my best
to account for every last measurement. The individual containers, three of them together
since that's how they'll sit on the shelf and the thickness of the board. I only had a single slab
of hickory to build with, so there was no room for error. Based on what you've seen me build on this
channel, you may assume that I'm a planner, but I'm really not. Now when I'm working with specific
animals, there's really no way around that, but typically I just kind of get to work and figure
things out as I go. All that's to say that I could not have planned for the fact that the lights I'd
embed in the underside of the shelves were the exact width of three containers side by side.
Despite not naturally being a planner, it's a skill I'm trying to learn. I know it will streamline
and improve my craft. Plus, I only had the one board so this was probably as good of a time as
ever to start. I collected my thoughts into a visual reference on this blueprint to account
for everything better. It helped more than I expected and is probably something I could get
used to. While figuring things out as I go usually works out well enough, I wanted the acrylic boxes
to fit as seamlessly as possible. After all, their dimensions dictated nearly every decision I made
since they'll hold the key to this design's success, the moths. Having a reference helped
me better account for all the numbers when it came time to cut the board. I've been creating
nature designs my entire life, but it wasn't until around 14 that I put a concerted effort
toward the craft. I estimate that I've spent somewhere in the range of 35,000 hours doing it.
I'll leave my calculations on screen if you're curious to see how I came up with that. These
really are just pointless vanity metrics at the end of the day though. The only reason I bring
them up is to better illustrate the point I'm about to make. I've made nature designs consistently
for so long that I feel confident in my abilities. However, I don't feel the same about carpentry.
My trajectory with it is similar to nature design with two key differences. First,
I've spent hardly any time doing it comparatively, maybe a few thousand hours at best. Second,
and probably most importantly, I've played it pretty safe. By that I mean I haven't pushed
myself to try new things often. As for actual safety, well, there's no amount of money I'd
accept to use a table saw how I used to. Yeah, ignorance is bliss until it's not.
Anyway, a glance through my catalog of nature designs show me that while there's some correlation
between time and skill, the most considerable improvements occurred when I tried something new,
even if I didn't get it entirely right the first time. Eliminating old habits, especially bad ones,
is essential for growth. That's a long-winded way to say that I finally started doing that
in the shop. And for this project, I thought it was the perfect opportunity to experiment
with some rabbet and dado joints to assemble the boards. Like many of those nature designs,
some learning and improvement did occur, but I may not have got it entirely right the first time.
It's not our mistakes that define us, but how we move past them, right? Regardless,
the piece fit together as intended. As you can see, there were inconsistencies in the front.
Long story short, I originally planned to make the dado as deep as it was here until I realized
the containers wouldn't fit. This made the front look wonky, but I'm hoping I could do it better
next time. I'll probably also just build or buy a router table to make the whole thing more
straightforward. That said, I did have a plan to fix it and would have it looking good in the end.
Phase one of that was to sand the boards up to 320 grit before assembly. I also drilled for the
lights, which would have been a little more difficult later in the process. The fact that
it looked bad didn't change how satisfying the assembly was. It happened pretty easily and all
the angles were perfect. While the glue-ups dried, I enacted phase two of the operation. Ripped down
strips of wood on the table saw that I sent through the planer for consistency. I cut these down by
hand to create a frame on the front. Unfortunately, the remaining length of the board was much lighter
than the shelf, which you can see here. While it doesn't really match the rest, I think it's far
better than the alternative. Plus, it ended up being a blessing in disguise, which you'll see shortly.
The containers fit well, but I knew in advance that there would be no way to access them.
That's why I decided to include these magnetic push catches. With these, I could simply press
a container to gain access. The cool thing about the trim is that without it, these wouldn't have
aligned well in the back. Because of that, I likely would have had to make one anyway to avoid an
overhang. I always love seeing how the wood grain reacts to a stain or poly. A few coats revealed the
subtle natural beauty of this one's characteristics. Working in small spaces like this can be a
challenge without the right tools. A few years ago, I randomly bought this flexible drill attachment
to do work on my truck. I didn't expect it to be as helpful as it is with stuff like these catches.
I got them and the lights installed with ease. I also did some cord management before firing
it up for the first time. It looked incredible. Well, almost. I'd do something about these later.
In the meantime, I had to account for the backs. I decided to use PVC board because of how easy it is
to work with. These alone helped make the piece appear more complete. However, I had to cut out
slots for the catches. I also made strips for the sides, which I attached to the rest of cyanoacrylate
and a catalyst. These were an improvement to the open space, but I wanted it to appear more premium
than a sheet of plastic. The answer was simple. Adhesive velvet fabric. It went a long way to
elevate the appearance of the entire design. All I had to do then was install these, complete the
cord management, and put bumpers on the bottom. The catches came with these metal clips. I added
some mounting strips before sticking them to the magnets. I later added some ventilation holes on
the front as well. All things considered, I think it turned out pretty well. The way the containers
click out of place is also incredibly satisfying. These were finally ready to become terrariums,
which meant I could collect the moss. There are patches all over, so it didn't take long
to make my selections. There were even some incredible finds at my fountain, and you know
I had to get that driveway moss from before. I got a few handfuls of other items I found
inspiring for good measure. It's been a few days since a good rain, so these mosses were thirsty.
I don't know about you, but I find it fascinating how resilient they are. One moment they appear dry
and lifeless, but within seconds of being watered, they spring back to life. In the meantime, I mixed
up coco fiber, sphagnum moss, aqua soil, charcoal, and sand. This substrate blend will remain moist
to maintain humidity without becoming compact. I use this in each of the terrariums, along with
a thin layer of sand. This foundational layer will create a water reservoir separate from the other
components. While there are many ways to make a false bottom, this is an excellent option for
simple moss terrariums. As I design these, I like to take the perspective of environmental
storytelling. What I mean is that these mosses live in places where things have occurred.
I use their stories as inspiration to better represent nature indoors. For example, moss is
usually mingled with other plants, but occasionally there's a location where only it grows.
Sometimes it will be a single species, and other times many are growing together.
I personally enjoy the combination of multiple textures, and wanted to capture that within this
scene. I also utilize the confines of the container to my benefit by placing taller species in the
background and shorter ones in the foreground, almost giving the illusion that these are
clusters of trees in a forest, if that makes sense. I knew this wood was perfect for a backdrop,
even though it's too large to fit. Nothing a saw couldn't fix. It can be helpful to add large
elements like this before the false bottom and substrate. Considering the scale of items is
really beneficial with these designs as well. While the wood in the back looks exactly like
what it is, it's also reminiscent of a rocky cliff. A finer textured moss would tie into that
better than the larger ones, helping it appear vast. I think it's neat how tiny things like this
can be used to give the illusion of something grand. Sometimes it's not about creating a
convoluted design, but instead showcasing the natural beauty of what's right in front of you.
This was one of those times. I wanted to showcase the unique rotten knot while
also telling the story of a fallen tree that's being overtaken by moss.
Moss also loves growing on rocks. Outcroppings covered in this stuff are very prevalent in my
area because of all the sedimentary sandstone. It wicks and retains water, making it a perfect
surface for moss to grow on. Leaves and debris tend to collect in the crevices around it,
creating a scene like this. Another distinct environment occurs under conifers. I collected
these items from under a hemlock and I'm just kind of putting them in this box.
Delicate branches have fallen out of the tree where they've been overtaken by lichen and moss.
All the while the tree has shed some needles and cones, creating something harmonious in the
process. As we've established, rocks and moss go hand in hand. However, tree roots often do as well.
Imagine that the dirt under a tree has eroded to reveal a beautiful rock in the grasp of its roots.
That's precisely what I wanted to mimic here.
Going back to basics can also be rewarding. A lovely flat landscape covered by a single
species of moss and various seed pods and branches, it's very simple but appealing.
Plus it will get better as it ages. I wanted to do something similar to this one while focusing
on the rocks. They have incredible texture that I did not want to hide. I also find the
juxtaposition between orange and green to be pretty appealing. While I used seed pods and
others, I didn't highlight them like I did here. Truth be told, I pulled this one from my botanical
collection and not the yard. We don't really have stuff like this in PA. Regardless, having
it surrounded by moss is something I could totally picture seen. Nine unique mossariums in one and
they're modular. That means I can rearrange them as I see fit to create the most cohesive
and compelling design possible, or simply to change things up during maintenance.
I'm curious to know though, which of the nine is your favorite design?
Doing something new or that you're less familiar with can be daunting, especially when issues
arise. What always helps me gain perspective during those times is that if you're not making
mistakes, you're probably not learning. And if there's one thing I can say with certainty,
it doesn't matter how long you've done something, there's always more to learn.
Bringing moss indoors is a lot of fun and it's not very difficult.
If you like these types of videos, then I know you'll enjoy the time I built an end table
specifically to house moss, or a mini moss wall that waters itself. As always,
thank you for watching and until next time SerpaSquad, take care and peace.
