If Your House is Old...You'll Understand

Sparky Deal
160 followers
#DIY #howto #woodstuff
Let our sponsor BetterHelp connect you to a therapist who can support you https://betterhelp.com/foureyes - all from the comfort of your own home. Visit and enjoy a special discount on your first month.
If you have any questions about the brand relating to how the therapists are licensed,
their privacy policy, or therapist compensation model, check out this FAQ:
https://www.betterhelp.com/your-quest...
About this video:
Every house has at least one weird, awkward space...where it's almost impossible to fit furniture. My house has several. Well today I'm addressing the two weirdest spots in my house and building some very custom furniture solutions AND surprising my wife in the process.
Today I'm building some custom furniture for some very awkward spaces,
and giving my wife the surprise she never knew she wanted.
If you've ever lived in an older house,
then you probably know what it's like to deal with some weird shaped rooms.
My house, built in the 50s, has at least four awkward spaces that come to mind immediately,
and they are in desperate need of some smart furniture.
And by the way, I don't mean smart as in integrated with
I mean clever solutions for stupid rooms.
Now I think I know why three of those awkward spaces exist in my house,
but one of them has always baffled me.
It's right at the end of our hallway where on either side you've got a doorway that goes
into a bedroom. But the weird part is on this side the wall is about 13 inches,
while on the other side it's like an inch and a half.
And that makes it very difficult to find furniture to fit this space.
You end up with either nothing, or something that gives you a little extra storage,
but doubles as a booby trap for kids running down the hallway.
So my wife Dolores, who loves her children and doesn't want to see them impaled,
has been asking me to build something for this space for a while now.
And I, being a great father and husband, said sure.
Here's a game plan.
I have three goals for this piece.
One, I want to utilize the full depth available on the right side,
so that we can get at least some function from this space.
Two, it's got to curve into the shallow part of the wall on the left,
so that it's not a death trap.
And three, and this one was Dolores' request,
it's gotta look...
That was verbatim.
She's got a bit of a potty mouth.
Alright, now the key to making all of this work is going to be this thing.
A template.
And I've shown how I make these in a bunch of other videos,
and I don't think it really makes sense to get into the nitty-gritty on this one,
because I don't imagine that there's going to be a lot of people out there
that want to build this exact piece.
In fact, I did some research,
and I think the maximum number of people who could even take full advantage
of this specific piece would be the people who live in these 35 houses,
that are the same floor plan, in the same tract as mine.
That said, I think that what I'm doing in this video
might still be beneficial to all of these people,
and actually, even all of these people.
Because while my solution might be specific,
the problem is universal.
Every house that I've ever lived in or even been in
has had at least one weird, awkward spot.
I'm sure if you pause for a second, you can think of the one in your life.
But it does beg the question,
why?
What's up, architects?
What, are you in cahoots with custom furniture makers
so we can charge people more for things that they can't find in a store?
Actually, I think there's some truth to that,
but I'll come back to that point.
But really, why?
I have two theories.
First, and maybe most obvious,
is that it's a problem with quote-unquote older houses.
Life in 1924 was very different than it is in 2024.
Like I said, my house was built in the 50s,
and something that you see in every house here
is a really shallow spice rack in the kitchen,
where there used to be a fold-out ironing board.
I guess architects in the 50s failed to consider that in 2024,
we might need extra storage for our everything but the bagel seasoning,
Flaming Hot Cheeto Dust,
and Cinnamon Toast Crunch Cinna Dust.
Or if a house was built in the 90s,
sometimes you'll see these huge, super deep built-ins
meant to accommodate a large CRT TV.
They didn't see plasma, LCD,
LED, OLED, QLED,
or even micro-LED TVs on the horizon.
And I'm sure we're still building things into new houses
that people will laugh at in 50 years.
I don't know what, but I'll guess, like, wires.
You know what though?
That's somebody else's problem for another day.
Okay, so at this point, all you've seen me doing is making panels.
And next, I need to make more panels.
But I don't want you to think that I'm making panels just for the fun of it.
So here, I'm going to reveal my plan to you and Dolores simultaneously.
Sorry.
You gotta warn me.
So it'll come straight out from our bedroom,
along the wall about halfway flat,
and then have this long curve that kind of goes back
so that it's not sticking out into the doorway.
Closed storage on the right, a couple drawers,
and then open shelving on the left.
Thoughts?
It's cute.
It's definitely better than what we have now.
What would we put in there?
Nothing.
The next people who live here can store stuff in it then.
We're not going to take it?
I think of it kind of like a built-in.
Yeah.
Not going to take those with us.
There you go.
One last question.
Would you say that it looks...
Chris!
No!
I don't know what that means.
So at this point, you and Dolores are fully aware of what I'm building in this video.
But I've got a little surprise.
In a couple weeks, it's going to be Dolores's birthday.
She's turning 43.
And I know they say you're not supposed to reveal a woman's age.
So while we're at it, she weighs 130 pounds.
Anyway, for longer than I care to admit,
she's been politely requesting a few things around the house.
Highest on the list is probably fixing this gate latch that doesn't quite reach for some reason.
But remember at the beginning of the video when I said that I can think of four awkward spaces
in our house?
Well, something else that she's been wanting is for me to build something for what is
probably the most egregious of those spaces.
This one in our bathroom.
Which is basically a big empty cove with literally nothing in it.
So I'm going to give her the second worst thing that you can give your wife.
A laundry basket.
Now before you judge me too harshly,
I should mention the laundry basket is going to be hidden behind a really classy cabinet,
counter, and some open live edge slab shelving with recessed lighting.
Now, I know it might get kind of confusing to be balancing around
between two projects throughout this video.
But I planned ahead and thought of a super simple trick.
Black shirt means I'm working on the hallway thing.
White shirt means I'm working on the bathroom thing.
Okay.
Theory number two.
Which I'm calling the renovation riddle.
So, quick little story.
We've actually been patiently searching for a new home for the past about 18 months.
And during that time, Dolores and I have toured a ton of open houses.
And I gotta tell you, we've seen some messed up stuff.
Weird layouts.
Where you're scratching your head and asking,
why would they do this?
Honestly, I've seen a few houses that I would have been interested in
if it weren't for the remodel.
It's almost like they did subtraction by addition.
And I kid you not, the two worst that I can remember,
both times the listing agent mentioned that the previous owner was a contractor.
Which I guess kind of makes sense.
They're a contractor, not an architect.
So they know how to build, but maybe just not what to build.
It'd be like if a chef made you a perfectly cooked steak
with a side of truffled mashed potatoes
and then finished it all off with creme brulee for dessert.
But then instead of serving it to you in that specific and preferred order,
they just blended it all together and gave it to you as a smoothie.
Look, I'm not saying that one way is right,
and I don't want to yuck anybody's yum,
but I'm just not going to buy it.
Anyway, I think that the renovation riddle
explains three of the four weird spaces in my house.
Like the reason that we have a big empty space in our bathroom
is because at one point that was a closet for a furnace.
And the same thing is true out in our living family room area
where we have this weird space.
It's because originally the house ended here,
but in the 70s somebody added a family room
and extended the dining slash living room.
And don't get me wrong, I'm very thankful that they did.
It just took a little extra thought to make it work.
And now it does.
By the way, if you want to see those renovation videos,
I'll link them in the description.
Okay, so here I'm double checking that all of my panels
are cut to the correct size,
and then I'm cutting the last of them
so that we can start assembling things.
And the way that we'll assemble everything
is with some dominoes.
And I took a very methodical approach to this.
Let me show you.
So first I made sure that I labeled
and marked everything out really carefully
so that I couldn't mess up.
Like, you see how it says two inches there?
Well, I know you can't see it,
but I promise you that under this clamp it says one inch.
And the reason that I did that
is I wanted all of the dominoes to be close
to the front and back edges of the panels,
but obviously without overlapping.
And this is what I ended up with.
But I thought, you know,
this might be cutting it a little close,
so why don't I go ahead and offset the depth
so they're like this.
Genius.
I thought of everything.
You can probably guess where this is going, right?
Yeah, so cutting them all in,
and I forgot to change the depth setting on one of them,
and plunged right through the top side of the top panel.
Bravo.
Now, I know what you're thinking.
Just swap the panels.
Make what was supposed to be the top the middle,
or the bottom.
Which would work, except that
I would already cut the dominoes into the other two.
So literally the only face of these panels
that doesn't already have a domino mortise cut into it
is the underside of the bottom.
And yeah, that ain't gonna work.
But you know what?
No big deal.
I know I can fix this after the glue-up.
For me, fixing stuff that's made out of wood,
that's easy.
But fixing my own mental health?
Not so much.
But that's what today's sponsor's for.
Better help.
I'm bad at being alone with my thoughts.
I'm the kind of person that needs to be preoccupied with something.
For example, when I go to sleep,
I never do it without listening to music or a podcast,
because otherwise my mind immediately goes to
the most anxiety-inducing thoughts.
I also work about 70 hours a week,
and other than the 15 or so that Dolores is here,
I'm by myself.
Now thankfully I'm usually preoccupied with
problem-solving for my projects or the video,
but I'll admit that it's probably not a healthy situation for me.
Now I have no data to back up what I'm about to say,
I'm just going off my gut feeling,
but I would guess that one of the main things
that stops people from getting help is the hassle.
They don't want to take the time to find somebody
and then have to travel to meet them each week,
which is one of the reasons that I'm grateful for BetterHelp.
Here's how it works.
You go to betterhelp.com slash 4eyes,
answer a few questions,
and usually within 48 hours,
BetterHelp will match you with a licensed therapist
who's trained to listen and give you helpful, unbiased advice.
And you can do it all from the comfort of your own home,
from your phone or computer,
via phone call, video chat, or messaging.
Listen, if you think you can use it,
let BetterHelp connect you with a therapist.
Like I said, just visit betterhelp.com slash 4eyes,
or use the code 4eyes during the signup process,
and you'll save 10% off your first month.
Seriously, if this is something that you think could help you,
don't put it off.
Just try it.
And thank you again, BetterHelp, for sponsoring this video.
Now, about that fix.
Is it invisible?
I would say if you're within about three feet of it
and you're specifically looking for it, no.
But otherwise, yeah.
It's probably about as equally visible as a Where's Waldo.
All right, so we're looking pretty good here,
but maybe just a little clunky.
So the next thing that I want to do
is add in a few edge details,
which will consist of a round over on the top front edge
to keep with our theme of not impaling children,
and then a chamfer on all of these interior edges.
Now, it would have been much faster
to skip the chamfers on this one in particular,
but I thought that it was important
because it's these little touches
that'll really help make the piece feel a lot more furniture-y,
which I don't think is a word.
But the thing that made it tricky on this piece
is that I had to wait until after the assembly
to cut the chamfers.
And because of that,
the router can't quite get to the inside corners.
So you end up with a radius at the transition,
which means that you need to use a chisel
to square everything up.
Not a huge deal if you're doing a single box,
but here that's one down and 11 to go.
By the way, just between you and me,
I'm sleeping with the garbage girl.
Don't tell Dolores.
Sorry, I shouldn't have said that.
That wasn't nice.
What I meant was,
please don't tell Dolores
that I'm sleeping with the
waste management collection specialist girl.
Anyway, yeah, so I had a problem in one of my 12 chamfers,
but this should be a simple fix again.
Basically the same as the other two
where you just add a little material back on
and then cut it again.
All right, let's switch focus for a bit
and start working on the bathroom built-ins.
So I showed you the plan a couple minutes back
and you might be thinking,
that looks like way too much plywood
for what you're building.
And you're right.
And that's because here's what my first idea was.
A lot more storage,
but to be honest,
storage isn't really our problem.
And I thought that this looked nicer.
So yeah, I ordered way too much plywood
from Woodworker Source.
No worries.
I'll use it for something eventually.
And actually, fun fact.
So I'm using Baltic birch plywood here.
And unlike most plywoods that come in sheets
that are four by eight,
Baltic birch comes in sheets that are five by five.
And since Woodworker Source ships their wood,
I think it's quite a bit less expensive
to send it in smaller chunks.
So on their site,
when you order it,
you can pick between a bunch of different options.
And that saves you from having to lug around full sheets.
And it turns out that I only needed one sheet
for this project,
but I ordered four.
Oops.
Okay.
I know that cutting plywood
into various sized rectangles
isn't super interesting.
So we're just going to zoom past this part.
And I'll just quickly call out the parts
that are interesting.
Like this rabbit along the back.
Or as my friends across the pond would say,
a rebate.
Either way,
an excellent place to attach a back panel,
whether it's made out of wood
or aluminium.
Then to assemble the box,
I'm going to use some pocket screws,
which once installed,
nobody's ever going to see.
So the utmost in privacy.
And actually,
can you excuse me for a second?
I need to go use the urinal.
All right, that's enough of that.
I already have to read about
how superior the metric system is in my comments.
And I don't want to have to start hearing about
how this is the right way to spell color now too.
Something I always find myself thinking about
whenever I'm working on a project
is the question of when to buy versus when to DIY.
I'm sure I'm not alone there.
I mean, honestly,
every project kind of starts with that question.
Is this something I should build or just buy?
And then there's all sorts of little echoes
of that question throughout.
Jigs, tools, you name it.
Like these little clamps right here.
Perfect example.
I've seen people who make these out of spring clamps
and rubber bands.
Obviously I didn't.
And anyway, while I was lost in thought
somewhere throughout this build,
I devised my personal checklist
to help me answer that buy versus DIY question.
And it all boiled down to this.
If something meets one of these three criteria,
it's a buy.
So something like electrical work,
that's dangerous.
That's a buy.
Any kind of serious plumbing,
for me, that's hard.
I know that I'm going to mess it up.
So again, buy.
Or those clamps.
They're cheap.
Buy.
Now to be DIY,
you would think that it's just the opposite.
But as it turns out,
something has to satisfy all three
of the inverse criteria to be DIY.
It has to be safe, easy,
and expensive if you don't DIY it.
So for example,
that gate latch that Dolores once fixed.
Hiring somebody to do that
would be relatively expensive.
It's almost certainly not very hard.
And if I mess it up,
I'm probably not going to die in the process.
That's a classic DIY.
Now I guess there's one thing
that kind of throws a monkey wrench
into all of this.
So those bandy clamps,
I think they cost me 60 or 70 bucks
probably, I don't know, seven years ago.
So money well spent in my book.
But if somebody has fun recreating them,
they should DIY them.
In other words,
money doesn't need to be a motivating factor.
All that said,
if you ever find yourself
buying anything from Rockler,
try the code 4EYES at checkout.
You'll get free shipping on most orders,
bandy clamps or not.
Now a minute ago,
you saw me laminating
two pieces of plywood together,
and those are going to be
for the hamper's countertop.
And then I'm going to cover everything
in some white oak veneer,
which believe it or not,
in the 15 years that I've been woodworking,
I've never veneered anything.
I don't know why I thought it might be hard,
but it turns out it's really easy.
Definitely easier than it was
to keep this project a secret from Dolores
while I'm building it right in front of her.
I guess thankfully,
she doesn't really pay attention
to what I'm doing.
But I am a little bit worried
about the install.
I mean,
once I'm at the house and working on that,
it's going to be kind of a dead giveaway.
So my plan there is,
in a few days,
her and the kids are going to be
at Disneyland with some friends.
And my hope is that I'll be able
to get it all in while they're gone.
I figure I should have about 12 hours,
which I think will be enough.
But I guess we'll see.
And that's because to be honest,
doing any kind of install like this
is completely out of my area of expertise.
Put it this way.
If you're a carpenter watching this right now,
you are way more experienced
in that world than I am.
If you're a DIYer who's done
maybe one install before,
we're contemporaries.
And if you've never installed anything
in your life ever,
well, let me show you how to do it.
Or at least let me tell you what my plan is.
So I built my box about a quarter of an inch narrower
than the opening it's going into.
So hopefully that should just slide right in.
No problems.
Then for the countertop and the shelves,
I'm leaving them about a half of an inch longer
than what they should be.
That way when I'm doing the install,
I can make some final cuts on site
using a track saw
to hopefully get a really good clean fit.
Now, all of this might backfire on me.
Again, I won't really know
until I'm there doing the install
because 9 out of 10 times
that you see this kind of installation work,
most of the problems are hidden
by molding or trim of some sort.
For example, the hamper's countertop,
my hope is that I can install it
and it looks like this.
But there's a chance that the walls are going to be bad
and I'm going to end up with weird gaps.
And then I'll just have to try
to get a nice fit here in the front
and add something around the top side perimeter
to hide the sins.
I hope I don't have to,
but again, we'll see when we get there.
Now for the drawer front
that you see me building here,
I'm taking a slightly different approach.
Again, I'm building it larger
than the opening it'll go into,
but here I'm leaving it about an inch too big.
And as you can see in the shot,
I've got a pretty thick hardwood perimeter.
And then again, I'm going to cover this
in the same white oak veneer.
And the reason that I'm doing it this way
is because my hope is that on site,
I'll be able to perfectly fit it
so that it's about an eighth of an inch
smaller than the opening.
That way I'll have a small gap on either side
where you don't see whatever's behind it.
So there shouldn't be any need for trim for sure,
hopefully.
So I guess with all of this stuff,
basically what I'm saying is
these are my thoughts and ideas
and I'm just kind of crossing my fingers
and hoping for the best on install day.
Okay, so the hamper cabinet is taken
about as far as I can take it for now.
So we're going to move back over to the hall table.
And the next thing that I need to do
is build a toe kick that the piece is going to sit on.
And I wanted this to follow the same curve,
but I didn't want to deal with trying to bend wood.
So instead, what I'm going to do
is cut some thick chunks of walnut to size
and then cut a very shallow angle at the joint
so that when I glue them together,
they follow that same angle.
Then I could use that same template
and some router bits again to cut the curve.
Now, technically this isn't geometrically correct
and I could have figured out the right curve,
made a new template and used that,
but it's so close and barely visible in the piece
that this just seemed like a better use of my time.
All right, I'm going to break one of my own rules here
and talk about something that I try to avoid
in these videos,
which is making money as a woodworker.
So let me preface this by saying,
I get asked about making money
and selling furniture all the time.
And I always tell people that
I'm probably one of the last people
you should want advice from.
Because while it's true that I have
a lot of the same skills as a person
who would run a business selling custom furniture,
the reality is my livelihood comes more from making videos
than from making furniture.
It's just that making furniture is the topic of the video.
Anyway, I'm going to break that rule
because I had some thoughts concerning
the easiest change that anybody can make
to charge more for their furniture
while I was building these pieces.
And this just seems like the perfect time to share them.
So really, I think there's two ways
that you can command a higher price
and both come down to simple economics,
supply and demand.
The first is to offer something unique
that people want and can't get anywhere else.
This could be a unique design,
the materials you use or the craftsmanship.
Basically anything that sets you apart
from what's readily available.
And the second much easier way,
at least from a creativity and skill perspective,
is to solve people's problems.
So as a little thought experiment,
imagine a person in my predicament with the hallway,
only they're a lot wealthier.
They go to Restoration Hardware and they find this piece.
It's 2,000 bucks and it kind of fits a space,
but not really.
Well, for 99.99% of those people,
this is going to be good enough.
But if you can find that one in 10,000 person
who truly wants a custom fit solution,
they will pay a lot more for that piece.
And it doesn't have to be any nicer.
It doesn't have to use fancier joinery or fancier wood.
And it's only very marginally harder to build.
It just needs to be the custom solution for their problem.
Honestly, in this situation,
the build isn't even the hard part.
It's finding the customer
or more accurately, having the customer find you
consistently and repeatedly.
That's the hard part.
Now, I'm sure I'm going to get some blowback
for sharing my thoughts about all of this.
And it isn't meant to be business advice.
It's really just, I don't know, a thought or an opinion.
And I guess that's why normally
when I get asked for advice on this topic,
I just keep quiet.
Now, the reason that I'm not keeping quiet here
is because I missed this shot.
So I did a little dramatic reenactment there.
But what I'm doing here is prepping this leftover chunk
of live edge walnut slab to become my three floating shelves.
So basically leaving them about a quarter of an inch oversized
and then doing some cleanup.
Now, to mount them, my plan is to attach
some plywood runners on the walls like you see here.
And then I'll cut some slots into the sides of the shelves
so that they can just kind of slide on.
And to make these cuts,
I decided to clamp the shelf pieces vertically
onto the edge of my CNC
and then just manually jog the machine back and forth
to clear out the material.
So I'm basically using like a big,
fancy, expensive remote control router.
Okay, this part probably has a high degree of **** for me.
So earlier I had mentioned
how I wanted to do some recessed lighting
in those shelves that we've got right there.
Something else that I want to do
is I want them to be mounted in the front underside
and kind of shine down and back.
So I'm going to use the CNC to do it,
which is...
That's not the hard part.
It's a very simple shape.
It's just a rectangle with some rounded corners.
But to cut them so that they are held at an angle,
I think what I need to do is make myself
some kind of a jig that I can clamp the piece to
so that it's held at an angle
while the router is carving.
And that should give me what I want.
I'm hoping I can pull it off.
If I really botch it, we just won't have shelves,
which would kind of suck,
but I'm going to give it a go.
I'm going to see if we can do it in low confidence,
but I think if I plan everything out right,
it's going to work.
So wish me luck.
Okay.
So I think I planned everything out right.
And it's the moment of truth.
And I think they came out pretty good.
So one thing that I did do was
I made the recess a little bit deeper, wider,
and longer than what it actually needed to be,
kind of because of that problem with older houses theory.
I mean, I like these lights for now,
but in 10 years,
there's probably going to be something better
that I or whoever lives here might want instead.
So I'm trying to do a bit of future-proofing.
What can I say?
I'm just the kind of guy
who likes to think of everything ahead of time.
I don't know why I didn't think about this
up until this point.
The whole time I was building,
I just kind of assumed that laundry baskets
come in every possible shape and size
and that I'd be able to find something perfect.
But I don't think that's happening.
Anyway, everything that I'm finding
is basically too small for the opening,
but the opening is not big enough to have two of them.
So I think I'm going to have to just
make my own laundry baskets.
If I build one and then it's all loaded up with clothes,
it's going to get really heavy.
Like Dolores is pretty strong,
but I think she's going to get really sick of it over time
and probably hate me.
So I think instead,
I'm going to build two smaller ones,
plus, you know, lights and darks.
So that's cool.
And I want to keep them as light as possible.
So I'll do those kind of relief cuts
like you see on pretty much every laundry basket.
And hopefully that'll make it light
because the way that you have to take this in and out,
you basically have to lift it up and over the drawer front.
Yeah, not the way that I planned on spending my day.
I kind of thought I was on the home stretch here.
I thought I was going to put finish on everything
and then I could, within the next couple of days,
go install.
But I guess I'll spend today
making some plywood laundry baskets.
You know, sometimes you get a red shirt
mixed in with the whites
and you end up with pink.
That's where we are now.
We're in the pink.
A couple quick housekeeping notes
before we get to the install.
One, do you like this video?
I hope so.
If you do, give it a like.
It's free for you and it helps me out.
And subscribe if you're not already.
Thank you.
Seriously.
Two, brass chunky mechanical pencils
are officially back in stock.
And like I've always said,
nobody needs a fancy mechanical pencil,
but it is really cool.
And if you want one, don't wait.
Because both other times
they've sold out really fast.
So link in the description.
Three, in my last video,
I announced that I've been secretly working
on a finish for the past several months.
And we are getting very, very close
to producing the first large batch.
Actually, by the time that you're hearing this,
it might be available for pre-sale.
To be honest, I'm not sure.
There's a lot of moving parts.
So because of that,
what I'm going to do
is have a link in the description,
which I'll keep updated status wise.
So if you are interested
in being one of the first to try it out,
go check out that link.
Here's the thing though.
This first run is going to be pretty limited.
And I think it's going to sell out really fast.
So just a heads up.
So we've spent several months
developing and testing the finish itself.
And I seriously could not be happier with it.
But for the past month or so,
all I've been doing is testing bottles.
And that's because this has always
been a pain point of mine with other finishes.
So I'm really hoping that we can nail this
because I want this to be
just the best possible experience
from start to finish.
See what I did there?
Finish. Get it.
Anyway.
Oh, I almost forgot.
It's got a name.
Sample 73.
I kind of hinted at that in the last video.
But basically out of the literally
hundreds of variations
that we tested to dial things in,
sample number 73 was the one.
And I don't know.
I just thought it rolled off the tongue nicely.
So that's the story there.
Okay, I'm going to stop rambling.
If you're interested, go check it out.
And again, I thank you in advance.
Okay.
Truck's loaded up.
They just left.
Let's go do this install.
I feel like I'm running out of time here.
I still got to go get the hall table.
Get that installed.
I'm going to have to do some painting touch up.
I can already tell.
So I'm not going to film much for this.
I'm just going to try to get the job done
so that everything's finished
by the time they get home.
So see you on the other side.
Okay, they're like a minute away.
So let's see how this goes.
How's Disney?
It's so hot.
I got something to show you.
There she is.
Oh my goodness, Chris.
It fits like a glove.
Can I open it?
You want to.
Oh wow.
It looks so good.
You don't have to get impaled by the corner.
So soft.
So curved.
No corners that you can run and be like bam.
It's custom.
Well done.
I got another surprise to show you.
Oh, what do you mean?
Why are you even dabbing?
Chris, finally.
Is this a hamper?
Yeah.
Did you make these?
Yeah, nothing would fit.
They're so cute.
Oh my goodness.
Oh, and you put lights in them.
Finally.
It's definitely better than a big empty nothing.
That's the way I look at it, right?
The bar was pretty low.
Yeah, you don't have to look at the dirty laundry.
You could put little towels, a little plant.
You could put...
I have one more surprise for you.
What?
We gotta go outside for this one.
Did you buy a car?
No.
Is it a dog?
Back here?
Yeah.
Actually, you passed it.
Here, hold the gate open.
Prop it open.
Oh.
Do you know how happy this makes me?
It's so stupid.
Look at that.
I didn't even know that they invented that.
Yeah, they can't cure cancer.
Oh, Chris, no.
No, for reals, is this what it's meant to be?
No.
No, it's like two dollars.
I just bought it at Home Depot.
So, but this is its purpose?
It's so stupid that it makes me so happy.
Best of the three projects.
Okay, that's it.
No more surprises.
See you next time.
