EASY Watercolor flower: Coneflower/Echinacea

Classical Kids Arts
76 followers
1 Video View·Oct 13, 2025
Comments are disabled for this video.
Hey guys, this is Neel. Welcome back to my channel. Today, I will be doing a tutorial on this cone flower.
This is simple and fun to paint. So let's get to it. Firstly, I'd like to go over the basic silhouette and shapes of the flower.
I will only be doing one angle or point of view, so it should be easier to understand.
The first thing I always draw out or paint will be the center of this flower for this particular type.
It gives you a nice center to the flower and here I'm just going to draw out the silhouette of the petals,
which kind of look like a skirt.
You can change how long or narrow you want the silhouettes to be. As you can see in the second one, the silhouette looks
more like a flying saucer. So these are the features that you're able to change for the petals.
The petal shapes are like long basic leaf shapes and the tips can either be a bit sharp or even rounded.
This is something that you can play around with and will come down to your personal preference.
For the placement of the petals, you can try out by drawing lines
directing to the center of the flower and make sure that the bottom creates a rounded fan shape instead of a straight line.
Once you figure out the direction of the petals, then you can go ahead and place the petals. If it's a bit hard,
you could even draw the petals within the silhouette first. These flowers are not the dense type,
so try to not go overboard with the petals and drawing something that looks a bit too thick.
It's okay to have gaps here and there.
In fact, that would make your painting a bit more delicate when you include some negative spaces.
Once you're comfortable drawing the exercises out, then you can try to draw the real flowers facing different directions.
I won't go over the leaves for this one because I'm just going to paint them as basic leaf shapes folding in different directions.
Once you're happy with the practice to draw them out,
I'm going to go over the colors now that I'm going to be using for the center of the flower.
And for this, I will be using three colors, which is vermilion, mineral violet, and permanent yellow deep.
The way I'm going to paint the center is by painting dots with the tip of my brush and
I'm starting off with the vermilion first.
I'm using a fairly thick consistency and I don't want my brush to be too wet.
Once you have down the half circle shape,
then I'm going to add some mineral violet to the center and fill the negative space using the same dotting strokes.
When the paint starts to touch the red part, try to make sure that the mineral violet doesn't travel all the way to the tip
of the red, but you still want to create a nice transition between the two colors.
After that, I'm going to add a touch of permanent yellow deep on the outer area, creating a nice transition.
You can also mix a bit of vermilion and permanent yellow deep to create a nice orangey color to create less contrast.
Try to keep a lot of the negative spaces within the center of the flower so it doesn't look too bulky.
Next, I will go over the colors of the petals.
I'm going to be using quinacridone red, permanent yellow deep, crimson lake, and also white to create more of a pastel color.
For the petals, there are going to be options.
You can either use a mixture of quin red and white to create a nice pinkish color or mix that with
permanent yellow deep if you want more warmth to the color of the flower.
The ratio of the permanent yellow deep to the quin red could also be varied, and it's really up to your preference.
As for the crimson lake, I prefer to use this color as is if I'm going to paint any petals behind the main ones.
For the stems and the leaves, I'm going to mix permanent green, olive green, and hocus green.
The only difference for the color mixtures will be the ratio of this.
For the stem and leaves, I want to keep it quite light, so I'm going to be using the
permanent green as the main color and the olive green and hocus green to slightly mute the color and darken it by a touch
so the color isn't too bright. As for the shadows of the leaf,
I'm going to add a touch more olive green and hocus green to create a darker green,
but don't go overboard with this or else the leaves might look a bit too heavy compared to the flowers.
You can try to paint the individual flowers first, but to save time,
I'm going to paint them and explain to you the process.
Feel free to watch this before painting along so you get to understand the steps before painting your very own flowers.
For this, I'm going to paint three flowers all at once.
This way, I can also save time and waiting for the paint to settle, and I'm thinking of something like a triangular
composition, so I'm going to scatter the center of the flower depending on how I imagine
the placing as a start. I'm using vermilion to start with the half circle on top of the center,
making sure that I'm doing small dots and leaving small areas white.
If not, you'll end up losing the texture and the center of the flower will look a bit too heavy, and
after that, I'm going to build up with the purple or mineral violet,
making sure that there's a slight transition between the two colors without the mineral violet traveling
fully across to where the vermilion is.
Finally here, I'm going to mix some of the permanent yellow deep with a touch of vermilion for the tip of the flower center.
In the beginning, my ratio was a bit off,
so the transition became too subtle, and then I ended up adding more of the permanent yellow deep,
but if you like more of a striking contrast, please use the
permanent yellow deep as is, without mixing any vermilion,
so you will have a nice rich yellow color as the tip instead of a light orange color, and
this will also increase the vibrancy.
Meanwhile, I'm also looking at the placement of the mineral violet. While the paint is still wet,
you can technically move the colors around slightly, so it's a good chance to control certain areas.
I'm also going to add some more mineral violet around the bottom area of the flower center,
making sure that the bottom is slightly curved instead of it being flat.
We're going to move on to the petals now, and here
I'm going to start with a pink tone, and to make that I'm going to mix Quin Red with some Chinese white.
I ended up using quite bold colors,
but if you're into more subtle colors, try to use thinner consistency than what I'm painting with.
You can also try to add more white, but the more white you add, the more
translucency you lose, or the more opaque your colors will be, so try to play around with that and see what you prefer.
Notice that when I'm painting the petals,
I'm curving the outer petals, and you're able to see the silhouette that we drew out in the exercise.
It does get a bit tricky if you're not used to it,
so try to draw it out and see if you can mimic the curvature of the petals first, if it's a bit hard to visualize.
Mine also isn't perfect,
but sometimes the imperfections are what gives character to your paintings too, so don't be too scared to give it a go.
Next here, I used a darker tone of the color.
You can either use a thicker consistency of the Quin Red without the white, or here
I just used the Crimson Lake
for the connection of the petals to the center, and then I'm going to smooth it out with my brush.
The petals are still looking a bit too hollow for me, so I'm going to fill it up a bit,
but this time I'm going to add a touch of
Permanent Yellow Deep into the Quin Red and the white mixture that we previously used to introduce another hue,
and I'm going to build on the petals. Keep in mind that where I'm connecting the petals to the center,
I'm leaving some negative space there to give a lighter touch. For the last layer of petals,
I'm going to use Crimson Lake, and I tried to paint somewhere in between the petals that we've already painted.
In some areas, I didn't paint the connection,
so this layer looks like these are the petals coming out from the other side of the flower.
I'm going to move on to the other flowers now, and I'm going to use the same steps, but this time
I'm going to introduce different colors to the petals using the same colors that I already have on my palette,
but just slightly adjusting the ratio.
I also don't mind leaving some white on the petals too, as long as the direction of the negative space suits the
direction of the petals, this would actually enhance the painting. For this flower,
I also felt like the petals are already dense enough, so I didn't add more layers in between the petals.
I just went straight to the Crimson Lake to depict some of the petals behind it.
After I finished this flower, I felt like it's a bit too tilted for my liking,
so I ended up adding one more petal on the left side that is a bit too long,
and it didn't suit the form of the silhouette, but I didn't mind it so much in the end,
so I left it as it is. I think it suits the purpose of adjusting the weight of where the flower is leaning.
I'm going to move along to the next flower now.
I ended up speeding up the process of the last flower and this one, because I'm basically using the exact same steps.
I hope you guys don't mind too much, and hopefully it's still understandable and easy to follow.
After the paint on the petals are completely dry, I tried to look around and see if certain areas
need adjusting, and I felt like the transition between the center and the outer petals
are a bit too subtle now, so I ended up adding the Crimson Lake in some parts of the connection.
Next, I'm going to move along to the stems and the leaves of this painting. I'm going to mix
all three greens that I have on my palette, but I'm going to add a larger proportion of
the Permanent Green or Light Green, because I want the stems and the leaves to have a brighter tone.
At this point, I find that the composition is a bit too bare, so I ended up adding more elements
of smaller flowers or an earlier growth stage. And for this, firstly, I'm using a mix of Quin Red
and Chinese White, and I'm painting lines to form a fan shape. And while I wait for that to dry,
I'm also going to paint a smaller flower. I'm going to start with the center first and follow
the same steps as we previously did, but just on a smaller scale. Just FYI, I also painted another
small flower on the right hand side, but since I tried to do a close-up, I didn't realize that I
painted that part off-camera, so I ended up editing that part out, but you'll see it later on. It's just
the same flower. I used the exact same steps to paint it, so you're not really missing out.
Going back to the painting, for the younger flower, I added Mineral Violet at the center
and in between the paint strokes that I painted earlier. And then for the smaller flower, I just
add the petals, but this time I'm painting shorter petals, and I'm also going to add a touch of the
Crimson Lake for the second layer. Then I went back to the green mixture again to paint small
leaves, connecting the young flower followed up with the stems. To finish off, I'm going to paint
the leaves. Larger ones on the larger flowers and smaller ones on the smaller flowers. You can add
different ratios of greens for the leaf color. It's really up to you at this point, just don't
go too overboard so it doesn't take away from the focal point, which are the large flowers that we
more of the Olive Green and Hooker's Green into the mixture to create a darker tone.
After that, I will just take a look at the whole painting and see if certain areas need fixing,
and I ended up thickening some of the stems because some are looking a bit too lanky for
this type of flower. And we are finally done with this painting. I hope you guys enjoyed this one
and learned something new. Thanks for watching till the end and I'll see you at the next one. Bye!
