How to make matcha Japanese green tea usucha with a tea whisk?

Tea Ceremony
37 followers
In this video I'm going to briefly explain how to brew or how to whisk a delicious bowl
of thin tea, Usacha matcha.
First what you're going to need is your tea bowl, a tea whisk to whisk the matcha, a tea
scoop to measure the amount of tea powder and your matcha.
Now these cans is what the tea comes in when you purchase it from the tea crane and they
have an internal plastic lid to keep the matcha safe from oxygen so it's an additional safety
to keep your matcha fresh and you might want to keep your matcha in these cans for usage.
So the first thing you want to do when brewing a bowl of thin tea is you might want to heat
up the tea bowl, so you add some hot water to the tea bowl and you also soak the tea
whisk in it so that the tines of the tea whisk can steep, so that they can soften and
that the bamboo becomes more flexible and simultaneously the tea bowl becomes warmer
and so it also maintains the heat of the tea when it's brewed longer.
So when the tea bowl is warm I suggest you pour the hot water out and then use something
like a clean towel to wipe the inside of the tea bowl dry.
Next what you're going to do is to add some tea powder to the tea bowl and for a bowl of thin
tea what you want to do is you want to use this front part of the tea scoop to measure one, two
and a half. I always use the side of the tea scoop to cut the tea powder open and if there
are any lumps in there to break those lumps up. And then once that is done I will pour hot water
and so in here we've got about one and a half gram of tea powder and the water is going to be
about 70 milliliters that I'm going to add. What you want to do is to pour as much water until
there are only a few dry spots left. That should give you enough water in balance with the amount
of powder. Then you're going to use your tea whisk and you're going to froth the tea going back and
forth inside the tea bowl. First you create the froth and then gradually you lift the tea whisk
up gradually so you only touch the surface and when you're doing this you can also break up the
larger bubbles on the surface so you can make it give it a clean look. In the end you write a Z over
the surface and bring the tea whisk out from the middle. This collects all the foam and leaves it
in a heap in the center which makes it look more beautiful. And then your bowl of matcha is ready.
Several points that I want to point out that are important to keep in mind when whisking. The first
one is what you often see in videos to hold the tea whisk from above and to use the wrist to snap
and create that foam. Now there are different traditions in tea ceremony in Japan and the
tradition that I practice is called Enshu Ryu. What we do is we hold the tea whisk from the
side and we use our whole arm to froth the tea to whisk. It's a different method for me that works
better. You might want to try it and see if either this or this works better for you. Another thing
is what I often see people do is make a round a circle of motion with the tea whisk. This doesn't
whisk the tea very well. What you want to do is to go up and down a straight line front to back
and you want to make that motion as large as possible. So you see here I'm going from outside
at the lower end of the bowl to outside on the higher end of the bowl and that's basically the
the motion that I make also when I'm in the bowl whisking the tea. So I'm going larger than the
bowl itself. Tines are very flexible so they when they touch the bowl they'll bend and that
bounciness is what is going to create your foam. You also want to make sure that you're keeping
the tea whisk straight up and bringing the whole thing front back. You don't want to tilt it over
because that's not going to do anything. So that are a few points that you might want to take keep
in mind when brewing your tea and now that your bowl of matcha is ready, enjoy!
