Restoring A Vintage Mahogany Dresser

Antique Art Deco
12 followers
6 Video Views·Oct 16, 2025
Join me as i refinish this old vintage mahogany dresser
Comments are disabled for this video.
Hey what's up everyone, welcome back. In this video we're going to be looking at this Facebook
Marketplace piece that I got for $100. In the first glance it might look like there's not
really much wrong with it but the finish is completely failing and the closer you get to
the piece the more that becomes apparent as you'll see in a second as I turn the camera down on an
angle. Now the top is completely, well half of it, is completely gone. Pretty much the finish
has been completely damaged and as I move down on the sides here you can see all those little
spots are finish damage. And just to give you a little bit better of an idea I'm going to come
down and with my fingernail I'm actually just going to scrape off some of the finish that's
already bubbling. So I'm going to have to address all of that and we'll look inside the drawers
and the drawers are actually in very good condition. They're really nice solid oak drawers
and this drawer coming up has some dividers in them which I love. I think that it shows a bit
of elegance which reflects on how well built this piece is. Now this drawer is absolutely beautiful.
The pulls on them are built in right into the drawer face. Or not even built into the drawer
face, they're part of the drawer face. And the other drawers are quite beautiful as well. They
have a beautiful veneer on them and the veneer is completely undamaged which is great news for me.
All right so without any further ado sit back relax and let's get into this piece.
All right step one removing all the hardware. I just had to get a new solo cup because my
old one broke so I'm starting a new solo cup to put my hardware into. Now this hardware was
pretty heavy it's definitely solid brass but it's extremely tarnished so I'm gonna have to
do a little bit of brasso magic on it. I'm not really a fan of this hardware but it is original
to the piece so I'm gonna polish it up. Now this piece wasn't really that dirty at all but I still
want to give it a nice good cleaning because I want to make sure that all of the residual oils
from people's hands dirt and dust is off of this piece before the sanding process.
And I'm just showing me giving it a superficial cleaning right here but I did clean every square
inch of this piece. I cleaned inside the frame, inside the drawers, on the outside. I tried to
make sure that there wasn't a speck of dust left. And for this piece I decided to use my carbide
scraper because the finish was so flaky and sun bleached that it was coming off extremely easily.
Now I know these carbide scrapers can seem a little intimidating for anybody who's new at this
so a few tips that I can provide would be first number one before you do anything just inspect
your blade make sure that your blade has a nice clean edge on it with no burrs or imperfections.
You want to eliminate the possibility of scratching or gouging the wood and just make
sure it has a nice sharp blade. And number two when you're applying the carbide scraper to the
finish you want to make sure that your carbide scraper is completely flat against the surface
applying just enough pressure until you start seeing some material being removed.
And honestly the rest comes with time it just comes with a bit of practice
and eventually you'll get the hang of it it's really not that difficult it just comes with a
bit of muscle memory and time. Now right here I'm going along the edge and you want to be really
careful when you're scraping along edges because it's very easy to gouge the wood. You'll even see
in some shots when I'm scraping along the edge I'm actually using one hand because you really
only need minimum pressure to get that finish off on the edge.
Okay now for scraping down the drawers. These drawers were a little bit tricky because you
could see that there are a bunch of seams in between the veneer. It's not just one sheet of
veneer it's picture framed and I have to be really careful when I'm scraping in between those seams
because you can easily catch the seam and tear it. So if you are new to this and you have a
drawer face that is full of different seams or even just one seam you might want to use
a chemical stripper instead just to be on the safe side.
So all of this trim now I obviously can't scrape because it's way too decorative. There are so
many high and low spots and it would be pretty much impossible to scrape so I'm using a chemical
stripper. I use Clean Strip premium stripper. I just find that this stripper works the best for
me. It really cuts through all those layers of finish or even paint or whatever you're working
with. It cuts through very easily and this lacquer finish that was on here was pretty thick and I only
really needed to do one pretty heavy coat on it to get through. And all I'm doing is applying the
chemical stripper letting it sit for about five minutes and then I'm coming in with a nylon brush
to scrub the finish off. And I would recommend using a nylon bristle brush when working with
wood because if you use one that's made of metal it can easily scratch the wood.
And I'm cleaning up all of the leftover stripper gunk with acetone. And I know a lot of people
like to use mineral spirits after to clean up all the stripper gunk but for me personally I
find that acetone works a lot better. And as you can see it's actually kind of funny there was so
much decorative parts to this dresser that it was actually chewing up the shop towel so I had to
switch to a rag. And this drawer right here was a little bit of a nightmare because there were so
many decorative bits to it and I really had to spend some time to make sure that that finish
was off and I was down to the raw wood. All right and it's finally time to sand. And since I got
pretty much all of the finish off via scraping I'm just going to start with a 180 grit just to get
any remaining finish off. And I'm going to work my way up to 320 grit before I put my finish on.
And I just wanted to slow down this clip right here just to show you how slow I'm actually
sanding because it could be a little misleading when you see all the footage very very sped up.
Which we have to do obviously because if we didn't speed it up this video would be 10 hours long.
But it is very misleading so I just wanted to give a little clip here of me
sanding in real time just to show you what it looks like. You really should be sanding about
one inch per second because if you sand too fast for the machine you could get some of those
pigtail swirls and those are no fun to get out. So just remember to try to keep your
sanding to a nice slow consistency.
And I'm just giving the inside of the carcass a nice sanding.
Now for all of the trim of course since it's not flat I'm going to be using Surf Prep's
sponge pad. And this thing is absolutely fantastic for getting into all those uneven
areas and decorative bits that would be absolutely a pain to hand sand. And I did
have to hand sand a little bit but it was minimal. Now what I'm going to be doing is
I'm actually going to be leaving some of the color the leftover color that's in between all
those little decorative areas because I think that when I put my stain on I feel like it's going to
give a little bit of dimension and depth to the look of the trim and the draw face. Normally I
would sand all of the color out but I really think it's going to give some extra pop and
character to the piece.
Okay now that my first round of sanding is completed I'm going to be addressing these
two dark water stains that are on the top. Now if this top was solid wood I would just
be able to sand them out and not have to worry about anything but this top is veneer so I don't
want to sand through it. So as you can see I'm using some oxalic acid and in case you haven't
seen any of my previous videos oxalic acid is basically just a wood bleach and it's really
going to help me get rid of these stains. Now if you're using oxalic acid for the first time
you're going to want to take some it comes in a powdered crystal kind of form and you're going
to want to put some into hot water. I usually put it in about a half cup of water and you want to
keep mixing it until you see that the oxalic acid kind of stops absorbing into the water and then
you're ready to go. I usually use a chip brush to apply it to my projects. I find that that's really
the best way to apply it and you're going to want to apply this to the entire surface that you're
working with. So for example the stains are on the top of my piece so I'm going to be applying this
to the entire top. If I were to apply it just to the stained area it would lighten only that
particular area and it would stand out like a sore thumb. So I hope that's helpful. So you're just
going to want to apply it let it completely dry and then you're going to want to rinse it off
completely about two to three times just to make sure that all those oxalic acid crystals are
completely gone and you're going to want to do that with a wet shop towel as you can see me doing
here. I'm just cleaning up the back panel a little bit because I'm going to be applying
some stain to it later so I'm going to repair it for that. All right now it's time to start staining
and I'm going to be making my own stain actually with Odie's oil pigments, Mr. Cornwall's creative
colors and I'm going to be mixing together two colors actually to make a custom blended color,
walnut and brick. So I'm just going to take some Odie's safer solvent and I'm going to pour some
into my jar here and then I'm going to add some pigment to it and you want to add the pigment
directly to the safer solvent first because the safer solvent is going to break down that pigment
and get it ready for the oil and then you want to give it a really good mix hopefully without
splashing it all over your hand like I just did and then when you've more or less found the color
you're looking for you're going to add some Odie's super duper everlasting oil and you always want to
give this stuff a really good mix before you use it. Now I'm making a ton of stain right here I
really don't need this much but I'm going to be using it for other projects so it's okay. You only
really need probably maybe an eighth of what I've made to be able to do one full piece and you can
see here I just have my little tester board I believe it's maple that I'm using just to test
the stain out and this third one that I made is absolutely perfect that's exactly what I was
looking for and I'm going to be using a 1500 grit mercury milan pad to apply the stain.
So
all right now it's time for some Odie's oil. I know you guys are probably like oh my god he
uses Odie's oil on every single piece and yeah it's it's my favorite finish to use. It's a
tung oil based hard wax oil finish completely non-toxic and a very durable finish. I'm just
going to give it a really really good mix and I'm going to start applying and just like the
stain I'm going to be using a 1500 grit mercury milan pad to apply the Odie's.
And here I'm just going to be putting some Odie's super duper everlasting oil over my stain
and one really important thing to remember is that if you're going to use a stain like this
you're going to have to wait three to five days before you're able to put your top coat on.
If you make an Odie's custom stain with their pigments and you don't wait the three to five
days you run the risk of some color loss of the stain so just something to remember.
And you can see the parts that I have stained it looks very dull and chalky almost
but no worries that all changes as soon as I put my top coat on.
I'm going to let the Odie's sit on there for about an hour and a half to two hours
and while I'm waiting for that I'm going to start the hardware.
All I'm doing here is I'm just giving these poles a little bit of a brasso bath
and I'm going to let them sit in the brasso for about 10 minutes and you can tell that the brasso
is really working and starting to lift all of that tarnish off because of that blue color that it
displays. And once it's ready I'm going to take a nylon brush and begin scrubbing off all that
tarnish. And these poles were so tarnished that I actually had to use two rounds of brasso to get
it off. And I'm just throwing all the poles in a little container of soapy water just to get the
residue of brasso off of it. And then I'm going to start with Meguiar's compound and I'm just
applying a little bit to the surface of the hardware and with this cotton wheel that I'm
using on my Dremel I'm going to be buffing it out to reveal that beautiful shine.
And now my Odi's oil has sat for about two hours so I'm going to buff it all off.
So
and last but not least I'm going to re-add the hardware.
And one thing unfortunately I was not able to show because there was a problem with the file
on my phone because that's what I'm using to record all these videos was me standing down
and shellacking the drawers the insides of the drawer boxes. So sorry about that. I just want
to thank you guys for watching another video. I absolutely love making these videos it's so
much fun for me even though editing these videos is a little bit of a pain but it's worth it.
If you guys like this content please consider liking and subscribing. I'm going to try to put
out a video once every two weeks. I was trying to do once a week but it's it's a little bit
too much but we'll see what happens. Hope you guys like the reveal.
