How to make a smiling clay face | statue face making | statue kaise banate hain

Hey friends, today I will show you how to make a smiling face in a big size from clay. I will make this face for a 6 feet statue. Actually, one of my friend who is a sculptor told me to make a face like this. So today I will show you how to make a smiling face from clay. And I will also show you how to make a mold from plaster of paris. So watch the video till the end. Because today I will show you how to make a smiling face in a big size from clay. However, friends, I will not lie to you that making this face is very easy. If you watch this video, then I will teach you how to make this face. I will not claim like this. Because it is a little difficult to make a face. And especially this smiling face is a little more difficult to make. But today I will try to show you step by step how to make a smiling face. So that those who are beginners can understand how to make a smiling face. Yes, they have to practice a little to learn. But at least today I will explain to you how to make a smiling face. So friends, to make a face, first of all, you have to make a U-shaped step on a ply board or cardboard. First of all, I put a clay pot in it. I put it in it so that I feel the clay is a little less. After that, I added clay on it and made a U-shaped step. After that, I drew with a clay tool where I will make the eyes, nose and lips. So following the same marking, I made a nose here. After that, where I will make the eyes, I made a little hole there. Here, friends, you have to keep one thing in mind that whenever you make a face, Suppose you have to make a face in the size of 5 inches. So for that, when you make that U-shaped one, it will be a little small. Like 4 inches or 4.5 inches. Like the face I'm making here is 7 inches. So that's why I made a U-shaped face from top to bottom 6 inches. Now see, I'm adding clay on it. As you add it, it will increase by 1 inch. So friends, see, I've put the face a little higher. This makes it a little easier to make a face. If you put the face on the ground and make it, the angle of your face is a little upside down. And that's why there's a little mess in the face. So whenever you make a face, try to make it like this. This will make the face a little better and it will be easier for you to make a face. So friends, look at the eyes I'm making now. I have a clay tool in my hand. Now look at the eye in this. I'm making it very simply. I made one eye. I also made the upper part of the eye. Now I'm going to make the other eye the same size. Friends, now keep one thing in mind here. The size of one eye will be the same as the size of the other eye. But the space between the two eyes should be the same as the size of one eye. If the size of one eye is 1 inch, then the size of the other eye will also be 1 inch. So the space between the two eyes will also have to be 1 inch. You'll have to make a nose in the middle of it. Now, when you make lips, what do you do in it? If the size of the eye is 1 inch, then make the lips 1 inch. Then it will be very nice to see the lips of your idol. Although the lips of a normal human are not like this. The lips of a normal human are a little big. But when you make an idol, if you make its lips a little small, like the size of an eye, then it is good to see the lips of the idol. Once you see the face of the idol, you will see that the lips of that face are a little smaller than the lips of a normal human. This increases the cuteness and sweetness of the face. But if you make a realistic human sculpture, this will not work at that time. So forget this at that time. Only when you make an idol of a normal goddess, you can apply this at that time. So friends, now I have made the eyes, nose, lips of the face. Now, after this, you have to look at the face very carefully. You have to look carefully at the details of the face, the size of the nose, the size of the lips, etc. After this, you have to clean your face very well. Now I have sprayed water on my face. Now I am cleaning my face very well with my fingers. As far as my finger is reaching, I will only clean it with my finger. And where my finger is not reaching, I will clean it with a brush. Like this inside the eye, my finger will not be able to go inside the lines of the eye. So that's why I cleaned it here with my brush. I also cleaned the teeth here. However, I will clean the line of the teeth later with my clay tool. See, I have a cotton cloth in my hand. Now I have soaked this cloth in water and I am rubbing it with it. This makes it clean. After that, we will draw the line of the hair here. So that's why I added a little more clay here. And I also drew the line of the hair here. And I also drew the line of the teeth here. After that, we will paint the eyeballs of the eyes. And we will see how the face looks. See, I have painted the eyeballs of the eyes with black color. And after that, the face looks good. So this is the final look of our face. After working for a whole day, our face is ready. Now let's mold this face with plaster of paris. For that, I took the face out of the mold. And I put a plywood support on the top of the face. And I put a barrier on the side of the face. So that the liquid plaster does not go out of the face. That's why I put this barrier here. And I made this barrier stronger from the side. So that the barrier does not break. After that, I took the plaster. First, I took the water. After that, I took the plaster. Now I will mix this plaster in the water. So the first layer has to be very thin. See, I have made it very thin. Because the thinner you make it, the better the detailing will be in the mold. If you make it too thick, the detailing will not be good. So the first layer has to be very thin. After that, you have to gradually thicken the second and third layers. See, the first layer is a little thin. After that, the second layer is a little thick. The third layer is a little thicker. The fourth layer is a little thicker. You have to give four or five layers like this. See, the first layer is done. Now I will give the second layer in the same way. See, I'm giving it in the second layer now. So you have to give four to five layers like this. Until your mold is not thick enough. According to the size of my face, my mold should be about 1 to 1.5 inches thick. So I'm giving it in the same way. If your face is small, then adjust the thickness of your mold accordingly. See, I have mixed jute in the plaster. This will make the mold stronger. See, I mixed jute in the plaster and gave it to the mold. Just like we put a rod in the roof of the house. In the same way, I put jute in the plaster of the mold. So that our mold is a little strong. After that, I gave another layer on top of the mold. And after giving the layer, I finished it from above. And after giving another layer, I finished it from above. So that the mold is well finished from above. So after finishing it from above, our mold is ready. Now leave this mold for 4 to 5 hours. Until then, it will set. After that, open this mold. See, I'm opening this mold after 4 to 5 hours. First of all, I will remove the back plywood. And I will also remove the side barrier. Then we will remove the whole mold. See, I removed the side barrier. Now we will pull this mold out. Friends, if any of you want to buy this mold for your idol. So you will get my WhatsApp number in the description box. You can message me there. But keep in mind that you can only message me there. You can't call. So see friends, our mold is well made. Only one or two places are broken. Now I will fix that too. See, I took that piece out here. I will connect it to the other place of the mold. So our mold will be completely fixed. So friends, this was our today's video. How did you like the video? You tell me in the comment box. Please like the video. So guys, thank you so much for watching. See you in the next video.