Stinger 0 to 4 gauge reducers

What's good YouTube man, it's your boy Yon Dub man coming at y'all with another update video here I know it's been a little while since I did an update man. I've been sick as ever Finally getting around to doing an update man. I'm still not out the woods, but I figured what the hell I kind of been doing stuff quote-unquote behind the scenes or whatever if y'all following the Instagram page that I post on here or Like I said a lot of y'all are friends with me on Facebook if y'all been following the Facebook page There's a couple of unboxing videos that I should have done that I haven't done I had a Okay, man, miss this a lot. I can't remember last video. I think the last video I did was on these here These dual amp inputs that I bought from toolmaker To go into these pioneer amps that I got and then I had bought some tech lime green tetflex I was gonna do an unboxing video on that Obviously, I didn't do it y'all follow Basically best way to do it if you're not friends with me on Facebook Go to the Instagram page that I the link will be posted in the description here You'll see the lime green tetflex that I put on the the power runs that I did in the car I know I had said that I was gonna do three power runs But after talking to master will and kind of inquiring about his setup. I decided to go ahead and just do two Obviously, I'm gonna go crazy in the back with the batteries and things like that and I did set up I have done my grounds with the Home Depot and got some some steel and Kind of made my own deal as far as tying it in with the chassis of the car and making things like that But the reason for this video now, like I said, I think the last video I did was on these here And if y'all seen that the way these are set up they're angled Or offset or whatever To make for a cleaner install for dual zero gauge With the feet of this amp that didn't work out so I bought these so I guess this is a some type of a unboxing or more or less just a Take the crap out and go forward with it, but I have I bought these Was this for zero gauge the four gauge reducer from stinger so hopefully y'all can see that so bought these a while ago But I bought these a while ago To take care of the issue with the feet here. So hopefully I can Get these to work out to go along to go into this amp. I Don't think I got anything Crap now it's on fire All right, so probably wouldn't recommend doing that But hopefully it'll open now It's got like some freakin It's wrapped up like I don't know if y'all can see that crease right there, but it's wrapped up like a resealable package Video because y'all know I do everything off the riff man. Oh edit a damn thing I just go for it and that's probably not gonna come out of there Let's see if I can Rip her open from the back. Yep. There we go. So like I said, it's like it's got a resealable deal on there. So We'll just take her from the back All right, so y'all see it Hell of a neck on that to get that into the amp, so I'm gonna just go ahead and Do a little test on it. Make sure that'll fit in there Y'all can see that hopefully y'all can see that on there. That's the negative post on the amp. So let's just Do this and make sure that it still fit in there Which obviously I'm pretty sure it will All right, yep, so I'm thinking this is this will probably be the best way for me to move forward as far as Making sure that I do a dual input. Let's see what you want to offset over here Probably do one of these Going into the power side and then that over there I Was gonna do dual 4-gauge, I'm probably still gonna do that on the power side if I don't sell these Lately I've been looking at now y'all know I got the two PRVs down. I think you can see that top one right there There's some PRV speakers back there. I'm thinking about selling those and Selling my scar audio speakers so I can go all PRV this year Cuz y'all know me and YouTube man, I get on YouTube and just lose my marbles So I came across the video where to do had two PRV Neal speakers on a 800.4 and that that man stuff was screaming like no tomorrow, so We'll see what happens man. I'm thinking about selling both of these and going With a Brazilian amp for the highs highs only maybe I know I'm not I'm not too fond of Brazilian amps Y'all see that big powerhouse over there Hopefully I'll do a gut shot on that Maybe this weekend if I have time or maybe sometime this week you may never know like I said with me being sick I don't I'm kind of iffy about going I've been going in due to the fact that I figure if I can go into work I can work on the car So it's kind of a catch-22. It's really not helping but whatever so I'll probably Like I said depending on how things work out this week. I might go ahead and do a video of that this week Doing the gut shot cuz I've been looking at that and How my trunk is set up and all of that crap, so we'll see what comes about that but hopefully I'll do a gut shot with that and Maybe do a video of the car and y'all see the progress that's been going on But like I said, please go to the Instagram link you'll see everything updated there So right now just do an update on these little stinger joints here Y'all see it in the amp so it is working. We don't have any mounting issues with the feet Y'all know I bought this quite a while ago my bass knob, and I just Since I got green and black as the theme I went ahead and put my little GP GP America GP car audio heat shrinks on the RCA's to make sure they're protected and obviously The RCA's that'll be going to the amp over there. I'll be going in this in and out to the amp so That's what I've been up to man, just kind of getting the wires and things like that squared away, so I know it's October But well, you know it's About to be winter time man. It's about to be Black Friday So definitely gonna be some purchasing going on there, especially if I decide To flip these and go with the scheme that I'm thinking of going all PRV for my highs this year, so We'll see what happens with that. I'm thinking I'm probably still gonna keep these jokers here Muscar VX35 ST super tweeters, I'm thinking I'm probably gonna keep those and Maybe order two more and all the rest may be PRV highs, but we'll see how that goes man. I'm Y'all know me man. It's if I can get off YouTube. I'll be fine, but With me being sick I just been googling and Like oh man I should put this little package together and things like that and texting people and trying to find out so Just do an update man if y'all know the deal Stay tuned still gonna do a giveaway with once I figure out what I'm gonna do with these. I'll get that updated Get the channel updated like I said hopefully do a gut shot of the amp the Orion 3k SPLX sometime later this week man, so if you have any questions any comments any concerns hit me up You know I try to reply to everybody if I miss you maybe Drop the comment again, or maybe drop the comment on a different video something like that. I always try to get back to you