Hand-embroidered painting 'Vincent van Gogh, Almond Blossoms'

I love DIY
48 followers
42 Video ViewsยทOct 6, 2025
Hand-embroidered painting 'Vincent van Gogh, Almond Blossoms'
Hello, this is Silver Snow.
Today, I embroidered a flowering almond tree in Goh.
I'll start embroidering with a beautiful color.
GOGO~!
First, I printed the picture I drew on the fabric.
Then, I fixed the fabric in a 155mm general frame.
I'm going to prepare the thread.
Cut the mint thread from the top of the label to about 50cm long.
There are a total of 6 strands of thread.
I'll use only 3 strands of this thread.
I'll make a knot.
Put your fingers in the order of thread and needle,
wind the thread on the needle three times,
hold it as it is, and pull out the needle with your right hand.
If this method is difficult, make a normal knot twice.
Today, I'm going to use only 3 stitches.
The first is the split stitch.
Come out from the starting point and embroider a straight line.
Split the center of the straight line and pull out the needle.
Stack the second straight line over the first straight line.
I'll embroider it in the same way over and over again.
I'll fill the tree with 3 strands of split stitch using mint colored thread.
By using split stitch instead of regular stitch,
you can express the surface of the tree with a little more three-dimensional effect.
At this time, instead of embroidering too regularly mechanically,
please split stitch while varying the length of the straight line a little more painterly.
While reinterpreting this work, I looked up a little bit,
and it is said that Goh's almond tree work is the last plant painting he painted in his life.
It is said that he worked very hard while actually observing the tree for his beloved nephew.
Maybe that's why the work is more abundant and affectionate.
I think it would be nice to feel a little bit of Goh's heart while embroidering together.
I'll finish it from the back.
Make two regular knots and tie them tightly.
After that, pass the thread through the needle and cut it with scissors.
I'll keep repeating it and fill the big branches.
Next, I'm going to use satin stitch.
It is a technique to fill the surface with a line.
I'll draw a line as if I were drawing a straight line and fill it once.
You can stack them in order.
Using the same thread, I'll fill the thin branches with satin stitches from the outer line to the outer line.
If you filled the wide surface with split stitches, you can fill the narrow branches with satin stitches.
Make split and satin stitches with 3 strands of Anchor Thread No. 618.
For the rest of the branches, you can make split stitches and satin stitches with 3 strands of No. 1040.
Lastly, it's a French knot stitch.
Come out from the starting point, wind the thread around the needle twice, and insert the needle to one side.
By slightly deforming it, you can make a very loose knot without pulling the thread with your left hand.
We'll actually embroider a loose knot like this.
I'll use 6 strands of No. 275, one strand at a time, and then combine them again.
You can embroider a loose French knot stitch.
At this time, embroider a flower that is three-dimensional so that it can be piled up overlapping.
Then I'll use thread No. 387.
After splitting one strand at a time, I will combine them again and make a French knot stitch with 6 strands.
I'll make it as if I'm adding abundance around the yellow stitch I embroidered before.
This time, I'm going to embroider beads using only one strand of thread No. 387.
First, embroider a small straight line with a needle to firmly fix the thread on the fabric.
I'll break one bead and take the needle out of the fabric.
In the same way, I'll break the beads one more time, that is, twice in total.
I'll fix it like this.
I'll also embroider apricot-colored matte beads everywhere.
Cut the fabric in a circle on the edge.
Then pull out the remaining thread about 1m long.
Like in the video, I'll break the fabric zigzag with a needle and turn it around.
Then pull the thread inward and move it back and forth with the rest of the threads to fix it firmly.
Then it's done like this.
Personally, I enjoyed embroidering this work because it was a very easy embroidery and a very high-quality work.
Thank you for watching this video until the end.
See you next time!
Bye~!
