I received my Toolmaker Metalworkz dual amp inputs for both of my 4 channel amps today and sadly they didn't work out for both the positive and ground side of my amps due to the downward angled inputs on the amps. I just ordered some circle shaped reducers for the ground side so I'll update the channel when I receive them.
Subscribe to the channel for demos and unboxing videos of the best in car audio! Whether its budget friendly or depressing for a wallet you'll see it all! Smash the like button, share and leave your thoughts on the videos! I respond to every comment and have giveaways every couple of months! Make sure to click the bell so you'll be notified when my videos are uploaded.
Follow my instagram page to view all of the photos of builds from the past and to keep tabs on my current build: https://www.instagram.com/johndub14/
what's good YouTube manager Boyan dump
coming out shot with another video here
I've been waiting on these two little
pieces for a hot little minute just do
an update on the channel y'all know the
deal like I said anything that I got
that comes in pertaining to my build
I'll go ahead and do an update on it and
I finally got these in I'll show you the
label here these came in from the
toolmaker I've been waiting on these for
a little bit I guess whoever owns tool
maker or runs tool maker has been out of
the office for a little bit so I ordered
these might have been last money at this
point
but I just remember whoever and when I
went onto the website just like whatever
you order tool maker won't be in the
office until September 3rd which was
Labor Day so I went ahead since I got
two of these pioneer amps for my highs
this year I went ahead and ordered diese
I think they're zero to four gates
reducers man let me open these up cuz I
know basically what I want to do since
like I had so many power runs and ground
runs on 4 amps I wanted to get these in
and make sure that no matter whether
they had was for the highs or the lows
what they're gonna star for current and
these things came packaged in the little
white envelope that y'all just seen and
wrap real good and these bubble wraps
along with the tape here so let me get
this open and take a look at these uh
tool maker inputs
let me get these out of here all right
so y'all see them dual zero gauge inputs
two four gauge reducers basically dual
dual zero gate inputs were four gauge
and they're offset
let me pull those up over here all right
so there you can see them they're offset
so basically what I'm gonna do with all
the power runs that I got for these I
was doing four gauge but I think even if
I go ahead and use the four gauge
obviously I'll do two runs on that
depending on how much zero gauge that
got left over I'll probably I'll
probably end up using that to be honest
with you but let me slide this hand
forward and just stick that in there
make sure that she's good to go and as
far as the power side she she fits
perfectly fine we tighten that down
so not really tighten it to the point to
where it's gonna go for installation but
yeah that's coming through y'all see
that there was ever going to the amp and
like I said they are offset so no matter
what it being on the power of the ground
side everything should be good to go now
this let me see if y'all can see the in
foot the mounting foot right there for
the ground it's kind of going in a
little sideways but I don't think
that'll be an issue let me see here I'm
going to tighten this down to way so
y'all can see it there the ground ain't
too pretty it's kind of going sideways
so that it ain't pretty man but I think
I'm probably still in abusing it get
that up yeah so that's I don't know I
mean I think I might still end up using
it just to make sure that the amp is
getting the proper current anything like
that so we'll take a look at it and go
from there man but so far it looks
pretty decent
definitely for just making sure we're
like I said the main thing I just want
to make sure that the amps are getting
the proper current and things of that
nature so we'll go from there and bam
but I've got two of these in since I've
got two of the Pioneer amps
I'm not gonna open this one until I get
ready to install the other pioneering
amp over here so hopefully I'll get
everything moving forward that's the
best I ain't gonna make no more promises
as far as doing installation and things
like that man cuz it always seems like
something comes up or maybe I'm just
being lazy that's just me keeping it all
the way 100 minutes sometimes I'm like
guard let me go ahead and get their
dirty things up and going in get it done
the whole nine the dentist days were
like yesterday
college football forgot was I said I was
gonna go ahead and run my wires and
install them on Saturday but I forgot
about a college football of course I'm
in Nebraska we go for the Huskers those
idiots decide to give the game away to
Colorado man so that kind of pissed me
off man but at least always got car
audio to fall back on against I'm done
so all I can do is just go ahead and
make sure that I get anything done based
on my schedule when I have free time so
the updates that keep coming anything
that I do as far as when I have free
time and things like that I'll keep I'll
keep everybody posted keep recording the
videos and go from there man so
apologize on the installation video I
know I really wanted to do that
yesterday man but I had the free time
and just kind of got lazy and just I
guess I wanted to catch up on some TV as
well so we'll get everything going
I finally got my tool maker templates
not really filling out the way to us I
know y'all can see don't care I'm not
really feeling that the way that's said
in sideways but I'm definitely not about
to cut off a mounting foot on the M just
to make that thing fit so we'll take a
look at that at another at a later date
and see what I can do to maybe fix that
maybe I can switch these around and clip
off I'll see what's up man but we'll go
from there making sure that everything
goes into the amp in a safe protective
mode and make sure if she squared away
but definitely want to do dual Ron
Center on both amps and get them up make
sure everything is loud and crystal
clear getting the best current that it
can get and making sure we do that for
the high as the minute the bass and
everything else man so any questions
comments concerns you know I'd like to
reply to every comment that you put on
the channel man
subscribe to the channel share the
videos man everybody who is subscribed
by definitely appreciated man
more updates coming soon like I said
everything that I do or post up or that
I'll receive as far as pertaining to the
build I'll definitely go ahead and post
those videos manager boy yawns up yeah
have a good night
I'm out
[Laughter]