Speed Up Your Oil Painting | Amazing Method for Realistic Fur

Realistic Painting OK
2 followers
1 Video View·Oct 3, 2025
Sometimes, I can't decide between using oil paints or acrylics. I like how you can
blend so easily with oils, but I also like how fast acrylic paints dry.
If you've watched my other videos, you'll have seen how I like to build up fur in layers,
which is why I normally use acrylics. I hate waiting days for each layer to dry when I'm
using oils. But, I think after a little bit of experimenting, I've actually found a
way that I can paint fur in oils in a much faster and simpler way by doing it all in
one sitting.
I'm going to show you this technique by painting a section of rabbit fur.
Thanks to everyone who voted for the rabbit fur on Instagram, I put out a little choice
of what you'd like to see, and it was the one that I secretly wanted to do, so thanks
again.
I've started on canvas, and I'm using a combination of browns, yellows, white and black paint
that have all been thinned down with sans odour thinner.
I'm only loading a very small amount of paint on my brush, and I'm wiping any excess off
with a paper towel before I'm actually putting the brush to the canvas.
What I'm doing is really just a step away from dry brushing. I'm almost having to scrub
the paint into the canvas. I don't want to absolutely lather it with loads of oil paints,
I just want to put down a base coat.
I'm not starting really dark with the oils either. I'm looking at my reference photo,
and I'm deciding what the average colour for the area is that I'm trying to paint.
I don't want to start really dark, because I might not be able to get it light again.
Because of the properties of oils, the colours are just going to end up going muddy, working
light over dark.
Once I've got that base layer down, I want to start the details and the strands with
my lightest colour, an off white, not a pure white.
This is different to my usual approach with acrylics, where I'll actually usually work
with my darkest colours first, and gradually get lighter and lighter.
But, because the oil paint doesn't dry as fast as the acrylics, I need to do the lighter
hairs first, so that they don't go muddy being used over that darker paint.
I'm only using a very small amount of thinner, like a tiny amount, just to help the paints
flow better, but without affecting the opacity of the paint.
That's going to be a little bit different for every paint brand, and different for every
colour within that paint brand. It's not something that I can just show you.
So it's worth experimenting with the paints that you own, to create a flowing paint that
still remains quite opaque and not see-through.
And because the rabbit has short, straight fur, I'm going to be using an angled brush
to add in the clumps and those strands.
Different fur types are going to require different brushes at this stage, and I talk a little
bit more about that in detail in the real time version of this video, which is for my
Patreon supporters.
When painting fur, it's really important to get a realistic look that you add variation.
You want to slightly alter the length and the direction of the fur, it makes it look
so much more realistic, and less like hair that's just had a comb run through it.
For short fur like this, you want to use very short brush strokes. They don't really curve
at all, which is why I'm able to use that straight angled brush.
You can see that I'm also leaving gaps between each of the marks that I'm making. This allows
the other layer to show through.
It gives the impression of layers of fur, and adds depth to what you're painting.
I start to add some colour variations and darker colours next. I'm using the exact
same techniques, I'm just repeating and adding darker colours each time.
The benefit of oils is that you only need to mix up 2 or 3 colours. As you add them
to the canvas, they'll actually start to pick up bits of the surrounding colours and
blend together. This is great because it adds more variation, and some softer edges between
the colour transitions.
Sometimes with acrylics, the fur can be a little bit too sharp, and a little bit too
crisp, and it just starts to look a little bit unnatural.
Once I'm happy with the colours, and I've added the darkest colour I need, I then switch
to a smaller brush. This is usually a small round detail brush.
I also swap out that sans odour thinner for an oil medium. I mostly use linseed oil, but
any oil medium will do.
So I mix my paint with the tiniest bit of oil. It doesn't need to be loads, but it needs
to allow the paint to sit on top of the layer. Rather than that buttery consistency that
comes straight out of the tube, it needs to flow a little bit more, it needs to be a little
bit more liquidy, almost like a thick cream.
The aim is to create a paint that can sit on top of the layers that I've just put down.
It's not perfect. The lighter colours can still mix if you press too hard or scrub,
but as long as you're gentle, and you just lay the paint over the top of your underlayers,
you can create a really nice fur effect, and really nice loose strands that adds to the
realism.
I actually use this to add more light, and also put some really dark sections back into
the fur, just to establish a little bit more depth and layering.
So adding loose strands to your fur can really improve the realism. And for this, I'm pretty
much just using pure white. I wouldn't usually recommend using pure white with acrylics,
because it just looks too stark and too unnatural.
But with oils, the white paint actually starts to pick up some of the underlying colours
that are already on that canvas, which ends up knocking back that white, and slightly
reducing the intensity, which, it makes the fur look more real.
All I'm really doing at this stage is just adding a few final looser strands of fur.
I'm not going overboard with it, and really, I'm just sticking to that saying, less is
more.
You can also use this technique for softer looking fur.
The real time video, which is exclusive for my patrons, also goes through exactly how
I do that softer fur. I'll leave a link to that in the description.
I really hope you found the video helpful, and if you have, please like and subscribe.
I would love to share my tips with more people, and every like and every comment from you
guys helps my channel reach more people.
Hopefully, you've been inspired by this video to try out some oil paints, but if you're
still unsure, and you prefer to paint with acrylics, then here's a video showing my
acrylic painting technique.
As always, thank you so much for watching, and I'll see you next time.
