HOW TO: Add Sand To Your Aquarium - CHEAP, CLEAN and SAFE!

Fish for Talks
2 followers
Hey everybody, Joey here again and welcome back.
Today I'm going to be showing you how to add sand to your aquarium.
Some important things to know when you're adding sand to your aquarium is first you need to clean it and how to add it into the tank properly.
So that's what I'm going to show you.
The supplies you need are simple. You need a water source. You should be outside while you're doing this.
You need a couple of buckets. I'm using three based on the quantity of the sand I'm using. You'll see why in a moment.
And my sand, of course.
I'm using pool filtration sand.
Why I use this is for a number of reasons.
It's cheap, commonly available.
The grain size is perfect. It's also not too dirty.
What I mean by grain size is it's a medium sized sand.
We're going to take a closer look at it here in a moment.
The importance to sand and the size of it is pretty important in your aquarium.
Number one, pool filtration sand doesn't have a tendency to clump up or compact in your aquarium.
It's still a good sized sand to allow water flow through it as well.
Not to mention it's price. It's only about $8-10 for about 40 pounds.
So a lot of good features to it. It also has a nice natural look to it.
It's inert, meaning it doesn't have an impact on your water quality or perimeters.
And it's safe for almost any fish that I've tried it with.
Including stingrays and bottom dwellers like that.
It doesn't have sharp edges. It's not made of anything that's going to hurt your fish.
So let's get started by taking a closer look at the actual sand and how to clean it.
Ok, so here's the sand. You can see it just simply says swimming pool filtration sand.
It says that it's for commercial and residential swimming pools.
The sand filters, that sort of thing.
Anyways, the look of it is an off-white color. More of a beige.
And a nice green size.
Let's have a close look here.
Ok, so as you can see it's a great green size for your tank.
Nice natural look to it.
One downside to using sand in your tank is that it is filthy usually. It's pretty dusty.
So we're going to clean it first before we add it into the tank. I'm going to show you how to do that.
Ok, one of the reasons we have several buckets is simple.
We rinse and wash a little bit of the sand at a time. We're not looking to get it all done at once.
I like to pour about 10 pounds into the bucket at a time.
Which is about a quarter of the bag.
You can see the dust coming off it already.
That's what we don't want in the tank. We want to rinse it off.
Ok, so we've stirred our water up.
Just some cold water. It doesn't matter the temperature.
All we're doing is filling the bucket up.
As you can see it's pretty dirty.
Not compared to most sands though. Pool filtration sand in general is quite clean.
But nonetheless, the water is cloudy.
It's got some particles floating in it.
That's what we want to get rid of.
As it's filling up, the reason why we're only doing a little bit at a time is because we want to be able to stir it up.
Ok, just continue to fill.
We'll be done filling in a few moments.
There's a great shot of the particles floating in it.
Obviously the water is still brown and cloudy.
Which is fine.
It's better to do this now than to have it happen in your tank.
Your tank water, if we didn't rinse it first, will look just like that.
Ok, so the water is at the top.
All we're doing now is letting it overflow.
We keep running the water in it until the water runs off clear.
Which can take a few minutes depending on how dirty the sand was to begin with.
But we stir it every once in a while here.
And eventually the water will run off clear.
You're never going to get it crystal clear at first.
But the longer you spend rinsing it the better.
Now let's say for example this is already running off clear.
Obviously it's going to take a little bit longer.
All we're going to do is pour the water out.
But not the sand.
The sand is pretty heavy so it stays in place while you're dumping the water out.
That's basically it.
Now this is why we have the other buckets.
With the rinsed sand we now dump this into one of the other empty buckets.
Let me get a closer look.
I'm not done rinsing this but again we just want to make sure all the water is out.
And not having all the water out is fine.
From there we simply dump it in the bucket.
That's pretty much it.
So we know now that this sand is rinsed and ready to go.
It's ready to be added into the tank.
So I'm going to go ahead and continue to rinse all the sand until I have it all done.
And then I'll show you how to properly add it to your tank.
So that you don't create any more issues.
So I'll do that now.
Okay guys so we're now ready to add the sand to the aquarium.
As you can see my tank is up and running.
There's fish in it.
Of course they're hiding.
They're a little pissed off at me right now.
Reason being is I just took out all the plants and wood and wiped down the tank.
What I mean by wiping down the tank is I took a cloth on the inside and wiped off all the algae that was growing.
And I clouded the tank up a bit so they're a little upset with me right now.
Obviously if you're starting with a new aquarium and there is no fish in it, you'll have a bare tank.
You can just dump your sand right in and fill your tank up.
A lot of us already have aquariums running.
We have gravel, you know, different types of substrates in it and we want to switch to sand.
So this is an option for you.
What you want to do is take out enough water out of your aquarium.
So that when you add the sand in, the water that the sand is going to displace is already taken out.
Sorry, the water that the sand is going to displace, yeah, is already taken out.
Obviously when you have a tank here and you add sand it's going to rise.
With a sump it's going to rise in the sump area.
I've already taken enough water out of there to accommodate the extra sand I want to add.
So, do we just dump it in?
Not really.
We take a simple Tupperware container, just a small one, you know, nothing too big.
And all we're simply going to do is scoop out some of our pre-washed sand, like so.
And lower it into the top of the tank.
Let it fill up with water, like so.
And we're not pouring it in yet.
We're not dumping it in yet.
We're not doing anything until we get to the bottom.
Okay?
And pour it out.
Okay, this is simply just a lot less stress on your fish.
Obviously it didn't cloud the tank or anything like that.
So what I'm going to do is go ahead and finish getting all the sand in the tank.
And then we'll come back, we'll take a look at it, and I'll tell you what to do next.
Okay guys, so now I have all of my sand in the tank.
As you can see, I'm not really adding a whole lot.
I'm just looking to get maybe a quarter inch, half inch of sand on the bottom.
This is mainly for aesthetic reasons.
I'm not looking for functionality of the sand in terms of growing plants and that sort of thing.
I will be doing plants, but I'm going to be doing low light plants
and plants that don't need a substrate.
You know, like Anubias, Java Fern, Java Moss, that sort of deal.
Anyways, next step is smoothing it out.
I'm just going to be using a piece of scrap acrylic.
You can use anything really, anything with a flat edge.
All we're going to do is take the flat edge of the acrylic to push it out, like so.
Just spread it throughout the tank.
I'm not looking for perfection at this point.
I'm just looking for distribution of the sand throughout the tank, just like so.
That gives me a nice spread of the sand right off the bat.
I can distribute the rest of the sand by hand, so I'm going to do that now.
We'll come back and we'll take you to the next step.
Okay, so the sand has been evenly distributed amongst the tank.
I never flattened it out or anything like that.
I just gave it a more natural look.
The background, you probably can't tell in the video, but the background looks far better like this.
I'm still having a bit of cloudy water here, so your next step,
even though we rinsed the tank, you're still going to get some cloudiness.
Or I'm sorry, even though you rinsed the sand, you're still going to get some cloudiness.
So my next step is to do a big water change.
So I'm going to change about 50% of the water, fill it back up,
and then we'll have a look and see what the tank looks like then.
Okay everybody, the tank has now had its 50% water change.
Obviously the water is still a tad bit cloudy.
That's to be expected. Don't panic if that's the case with you as well.
The water will clear within a day or two, probably by this evening for me.
So yeah, that's start to finish adding sand to your aquarium.
Obviously I went with pool filtration sand.
It's actually becoming more and more popular in the hobby with time,
due to its appearance and the benefits of it,
including the price only being $8 to $10 for 40 pounds.
It's an amazing price. It's inert.
No effect on the water chemistry or perimeters.
Nice round grains to it, a nice size as well,
allowing water to circulate through it.
On top of that, it looks great. It looks pretty good.
It's not bright white sand, but it's definitely close to it.
It's an off-white with a sprinkle of peppered different colored pieces of sand through it,
giving it a nice natural look.
Obviously my fish are still hiding over in the corner there.
They're still a bit upset at me.
I'll apologize to them with a treat later perhaps.
So now all I've got left to do is add in my decorations,
which was just some java fern attached to some wood.
I'm still not sure what I'm doing with this tank,
but this is basically the latest update.
I figured I'd show you how I'm doing it.
Anyways, thanks for watching.
I hope you enjoyed the video.
If you're not subscribed to me, please subscribe.
As always, it definitely helps me.
And if you're not a member, check out my new website, diyfishkeepers.com.
The link is in the description.
We're growing fast and lots of discussion going on.
So come in, drop by and have a look.
Hope to see you soon. Thanks for watching.
