In this video, we restore and makeover a beautiful British bar cabinet made by Beautility. This post world war 2 relic is a brilliant example of English Art Deco furniture! Follow along for another DIY restoration remake, as we attempt to bring this classy server cabinet back to life.
**We may receive a commission on purchases from these links - at no cost to you! Thank you for supporting our channel.
Comments are disabled for this video.
English Art Deco had its own unique flavor,
and this attractive bar cabinet turned out to have a very unusual history.
Welcome to Montford Boulevard. We work almost exclusively in Art Deco furniture,
yet somehow always make new discoveries. This isn't the first English drinks cabinet we've worked on,
but its history was not at all what we expected.
Follow along as we problem solve the unique challenges of this restoration remake project,
and do our best to honor the unparalleled era of Art Deco furniture.
We found this bar cabinet in Tennessee, just a couple hours from where we live in Georgia.
It was listed online, and we definitely thought it was worth the trip to pick it up.
It's a little plain inside, but you can see it's in really good condition.
Sticks just a little bit there. We'll see if we can get that to function smoother.
Some veneer damage here, and we've seen this in English Art Deco before.
It's sometimes cut a little bit long, the veneer there, and it can cause some issues.
Found this funny photo inside. Love it. Does anybody know who that might be?
This is actually a vintage postcard. Wondering if that's maybe a British celebrity,
an author, something like that. We'll hold on to that picture.
You'll notice the green felt in there. We will deal with that later.
This shelf was missing a support on the left that will be easy to replace.
Look at this base, the spindles, we really like that. This is part of the reason why we wanted
this piece. Love that emblem on the front. These handles too, they're quality. This bottom drawer
was also missing a support, a guide, so we'll have to fix that. And then the label, we were
very excited to find this. Butility. Butility was founded in London in 1894 by Simon Sadowski.
It began as a cabinetmaker's shop, but expanded and flourished throughout the Art Deco era and
beyond, when the company was taken over by his sons. The name Butility describes the furniture's
intended dual function as both beautiful and useful. During World War II, Butility largely
put aside furniture making and was employed by the British government. The two Sadowski brothers,
who owned and ran the factory at this time, were saluting their younger brother Harvey,
who had enlisted in the war, by showing the V for Victory sign you can see in this image.
In wartime efforts, Butility produced ammunition boxes and, more notably, parts for the de Havilland
DH-98 Mosquito. The Mosquito was a twin-engine aircraft, famous for its wooden construction
and its nickname, the Wooden Wonder. Its unique composition made it one of the fastest aircraft
in the world in 1941. After World War II, perhaps feeling like they missed out on the peak of the
Art Deco movement, Butility jumped back into producing Art Deco-styled bar cabinets.
We initially thought that the piece that we have was from the 1930s,
but in fact it's from the 1950s. That was quite late in the Art Deco movement,
but Butility made some wonderful contributions to the Art Deco furniture genre regardless.
Proceeding with the disassembly now. We want to get these handles off so that we can polish them.
To access this front handle, we actually need to get inside that compartment.
We'll take the glass off first. It's kind of funny how that screw is hidden. The access is difficult.
This is in really good shape, the wood on here. We do want to refinish it,
but as mentioned we might shave down the sides of this just to make that close a little more smoothly.
You can see that veneer damage there.
Removing the drawer and we could see where the guide
came off. Still have the glue marks there, so that's a good head start.
Didn't take much to show that this wood is looking really good on the inside.
Look at that. That's probably amber shellac, the finish that was under there. Looking very good,
so we're probably going to preserve that. Get rid of this icky green felt. It's kind of like a
chip and putt golf course or something. Came up quite easily. That's fortunate.
And then this gorgeous emblem. We're very excited to get that polished up again.
Trying not to damage the front as we take it off. Look at that ghost mark it left on there.
You can see that it is plated, so we're going to just give that a fresh coat of
lacquer. But first we'll remove the initial plating. Comes off quite easily. That was very thin.
It's kind of surprising. A lot of this came off just by scrubbing it,
but you'll see later we could not get it to completely disappear.
Not a problem because that emblem is going back on there.
The insides we are going to leave. That's in such good condition and that wood does look really nice.
But we want to see if we can just liven up the outside, the exterior of this piece.
This was a really thick coat of finish. It was difficult to sand it off.
Decent quality veneer though, which was very fortunate. You can see how much that brightens up.
English oak. We always appreciate seeing that sort of veneer has its own unique trait.
There's that ghost mark I was talking about. Didn't completely go away, but
again the emblem will go right back over top of that, so that's okay.
We're going to address this troublesome veneer now.
After we got it reattached, I did sand that edge just to get rid of that lip.
I'm not sure why that was the case. We've seen this before
on English bar cabinets where the veneer is cut kind of long and it causes that problem where
things catch on it and it peels up. Got our high-tech clamping solution here,
and while that dries we are going to take a break via the sponsor of today's video.
Today we have the privilege of checking out the XL6 Pro FlexiSpot oversized power lift recliner.
Once you take a break and sink into this comfy chair, you'll probably end up staying for a while.
It has triple motors for independent control of the backrest, the footrest, and the headrest.
The stepless adjustment capabilities allow for precise customization.
This helps to find the perfect angle for your head and neck.
From there, you can relax with soothing massage and even warming features.
Built-in USB charging ports are super handy.
There are also cup holders, caddies for the remotes,
and convenient side pockets that we really appreciated.
The XL6 Pro can go completely flat and it sure is comfortable in that position.
The lift feature can also help you get up out of the chair.
The strong extra wide seat can accommodate up to 440 pounds.
We work with furniture every day and can attest to the quality of the XL6 Pro FlexiSpot.
The price is impressive too. Lift chairs along these lines can run $2,000,
but this one is priced at around $700.
Check it out by clicking the link below and use our exclusive code XL6PRO50 for an additional $50 off.
Checking on that veneer now.
We let that dry overnight. That was wood glue, Titebond II.
That's nice and solid. Definitely in place.
I've got those gaps to fill and sand, but this could have been much worse.
There was a real catch point at the bottom with the veneer there,
and you can see the problems that it caused.
So this was another bar cabinet that we did, you may recall, English bar cabinet.
And recently we got some pictures from the woman who commissioned the design from us
in its new living space.
This is exciting to see.
It's just really a privilege to see our finished pieces coming to life
and enjoying their new home.
Certainly the case here.
Back to sanding.
So the doors and drawers had a really thick finish.
This top was even thicker.
Really difficult to cut through that.
So after beginning on the sanding, we decided to strip the rest of it.
Just needed that head start.
Usually it's a last resort for us to go to stripper.
It's just such a mess and it's smelly and it's a hassle.
Moving on to the handles and hardware.
I'm going to give them a fresh coat of lacquer.
This is Mohawk brand.
It's the best quality furniture aerosol that we've found.
So we seal the gold.
We coat it in black then.
And then remove the black shortly after applying it.
That's how we get this antiqued look that we always like to do.
And look at that emblem.
Looking much fresher.
We're starting in with some stain now on the doors and drawers.
This is ebony oil stain.
Giving that English oak a nice fresh sheen.
And we are coating this with Prolux.
Brushing it on.
This is a very durable finish.
Oftentimes used on doors.
It's exterior grade as well.
So you could do the outside of your front door with that.
But we like to do a couple of coats on certain furniture pieces for a really good durable surface.
Adding some gel stain at just a select portion of the spindles down here.
That's what we want to highlight.
We've lightly sanded the rest of it.
And look at this.
Had another visitor here today.
This is Francis, the snorty bulldog that lives in the neighborhood.
Does anybody have any weird pet stories?
I actually used to have a giant iguana.
His name was Bob.
I had to give him up when I moved.
But he was a fun weird friend.
Getting back to the drawers here.
A couple of sand throughs.
There was thin veneer on the drawers.
The rest of it was really thick.
But for some reason, maybe it was the technique for bending it around these drawer fronts.
But it was quite thin.
Using the lacquer powders.
The blend all powders for this touch up.
We do link these in the description if you want to find the products that we use.
A little bit of French polish here to blend the colors.
And that's getting pretty close.
Add a coat of satin lacquer over top.
This was after that Prolux had dried.
And you'll notice it's the same brand on the aerosol that we use.
And this is the second coat of that brushed Prolux.
If you use this, the first coat can tend to look a little cloudy.
But it needs at least two coats.
Sometimes we'll do three.
But the final result is always a very, very impressive sheen.
And here's how it dried.
Yeah, we're happy with that satin finish.
That'll be very, very durable.
So we're looking at the bottoms of the base here.
I'm going to pop off these metal cleats.
They can tend to scratch the floors.
So we prefer nylon glides.
Just taking a look at that beautiful English oak.
I'm going to coat that with satin.
A couple coats.
There's how it dried.
Looking very, very beautiful.
Now we've got that masked.
And we are going to add some black lacquer.
You'll notice I'm wearing a full respirator here.
Lacquer, you don't want to be breathing that stuff.
Even though we've got ventilation here.
Still just trying to avoid it.
But this black is really going to make that grain pop
in those spindles and the rest of the piece.
It's actually kind of hard to notice this base.
This is going to make it just a bit more noticeable.
And we're adding some gold accents here.
I'm going to go light with the gold.
But here's a look unmasking.
You can see that starting to come to life at the bottom there.
The gold will require just a little bit of cleanup.
You can see my masking wasn't perfect.
No problem there.
And the other side.
That attractive grain is popping even more.
Love it down there.
So this was another English bar cabinet that we found
at a local consignment shop that we work with.
You see that gold striped mirror?
We've had trouble finding that product.
If anybody knows where to get it in the States, please let us know.
We can see that Butility worked with that design before.
So that's the look we want to go for.
This is a mirror surface that comes in a roll.
We're going to use that as our base.
Cut a piece here that's just a little bit bigger
than the glass that came with this cabinet.
These are gold pinstripes.
They're used for vehicles.
So it's really high quality and high durability.
The adhesion is really strong.
The adhesive in these stripes.
Now we've clamped the piece of glass in place
and that will enable us to cut out the mirrored striped surface that we made.
Taking a look at that emblem.
We do need to put that handle back in place.
If you'll remember that cavity.
The screw goes inside of there.
Then you can close it.
But here's the finished result.
Replicating the style that we admire.
We decided to paint these screws black.
The hinges are gold lacquer
and the black is going to make it pop just a little bit more.
A little bit of color separation there.
We've got the original backsplash here.
We sanded it just to open the pores
and now we're adding French lacquer as a base coat.
Coming back in with black lacquer now.
Gonna go for a nice smooth finish there.
So we reattached the original backsplash with the black on it
and decided it could maybe use just a little bit more.
So we came back in with a gold stripe.
That's going to kind of reference the feet.
The base at the bottom.
Show that later.
And instead of that green felt,
we have this nice peel and stick black felt.
Gonna kind of stick with the original aesthetic
but just upgrade it.
Give it a bit more elegance.
We think that feels a lot better.
We put it on the divider as well.
That original hardware is still in place.
So that pops right back in there.
We're going to put the drawer guide back in the bottom.
We actually had that still with this unit.
We had to cut a matching one for the other side
but that was quick.
Used some wood glue and screws to make sure that stays in place.
Now we're looking at these front doors
and they're just a little bit plain
and we'd like to make these handles pop just a little bit more.
We would like to keep the effect understated on this piece
but we think this will do it.
Adding sort of an Art Deco vibe here
with the black and gold half circles
and the handles will go over top just like that.
All that's left is to reattach the front doors
and with that she's ready for her close-up.
One more look at the beginning here.
This piece did have a lot going for it.
We just wanted to kind of turn up the volume here and there.
Give it a boost.
Some of the best bar cabinets you can find from the Art Deco era came out of England.
This is a fine example.
It's really fortunate that imported pieces like this
can sometimes be found in the United States.
To purchase this Art Deco drinks cabinet
look for the link below or just reach out directly to us.
Thank you so much for watching until the end
and for all of the likes, comments, and interactions with our channel.
All of it really does help.
We'll be back again soon with another Art Deco furniture restoration remake
but you're welcome back here at Montford Boulevard anytime.