Step behind the scenes of my Dungeons & Dragons VFX short film: Call Lightning! In this vlog, I take you on set as we bring a sorcerer’s storm to life using Unreal Engine, practical lighting setups, and full VFX tracking workflows. From setting up C-stands and blasting an Amaran 300c in the forest, to capturing drone shots and troubleshooting corrupted footage, this episode shows the real grind of indie filmmaking.
Along the way, you’ll get a glimpse into the Circle of Rot Druids, one of the darker factions in my homebrew fantasy world — inspired by FernGully’s villain and swamp witch-doctor aesthetics. 🌿💀
🎥 What you’ll see in this vlog:
On-location BTS in the Tennessee woods
My gear setup (Sony FX30, Atomos Ninja V, Tentacle Sync, Unreal Engine tracking with Lightcraft Jetset)
Using LiDAR scans + Polycam for VFX projection mapping
The challenges of low-budget, high-ambition fantasy filmmaking
How I balance being a creative director at my day job while building my dream boutique fantasy studio
If you love fantasy filmmaking, D&D-inspired VFX, or worldbuilding, you’re in the right place. This channel is where I’m building a Weta Workshop in my garage — crafting costumes, sets, and cinematic spells one project at a time.
💬 Let me know in the comments: What D&D spell should I bring to life next?
⚔️ Don’t forget to like, subscribe, and hit the bell if you want to follow the journey as we turn tabletop magic into cinematic reality.
Do-do-do-do-do-do-do-do-do-do-do-do-do do you want this?
Do-do-do-do-do-do-do-do-do-do-do you need it?
Alright, so I am preparing for a meeting here
this first thing this morning,
and then with a potential client meeting,
and then moving on to preparing for the shoot tomorrow.
So, meetings and all that stuff done,
I had a gap in the day because I had
a bunch of my day job to do.
Over at Light Shift Video, so I am now getting together
all my stuff I need for tomorrow.
So right now I have my VFX,
my VFX, my lenses, my gimbal setup,
and then camera.
♪ Now tell me, do you feel anything? ♪
Stay two of Call of Lightning,
getting ready to start packing up the first load of gear
to go out to the location.
This is gonna be my C-stand, my lights and all that stuff,
so we're gonna give it a go.
So I know the sunlight's really bad on me
because the sun's behind me,
but I am on my way back with the camera car.
We have two more loads, one more grip electric,
then we'll wait for Lucas to get here
before taking the camera gear out there.
So yeah, we're on schedule right now.
One of the things that's funny about the area I live in,
so I live in like,
I live in the country in a small town
outside Nashville, Murfreesboro area.
And one of the fun things about shooting,
this happened the last day of shoot,
which I hope I got enough B-roll to show a little bit
of the first shoot day of Call of Lightning.
A lot of people were slowing down
and asking me what I was doing.
You know, with all the, with the, you know, C-stands out,
and lights, and camera, it was really funny.
And then Lucas, I mean, Lucas,
I think looks really cool as a sorcerer.
So like, people were stopping me like,
what is this guy doing?
I kind of keep to myself a little bit.
I'm friendly, I wave.
I'm still a Southern boy,
so I still like talk to people and stuff.
But I don't think a lot of people know what I do,
especially for a living.
Yeah, there's a couple of people who would stop
and then I'll show you,
but it's excitement for a small town,
you know, with the rig and everything,
but people would stop right about here
because we're shooting right here.
So people would stop right around here
and ask, hey, what you, what you, what you doing?
And, or, or one guy was super nice
and he was like, man, I really love that outfit.
That was really cool.
You know, I didn't know you guys filmed out here.
I was like, yeah, well, so I did.
It was kind of funny, you know,
because like I said, it's,
we're in the country a little bit
and it's a small town, so.
So as you can see here,
I'm setting up my 300C with a Fresnel.
I am still very green to lighting.
So if anybody has any comments about lighting
and whatnot, I'm happy to hear them
because I'm still learning it.
But at this point, I was just trying to blast light
onto Lucas's face,
try to create some definition
while we were also in a forested area.
So.
Hi, Lucas.
We're definitely holding on.
Oh, awesome.
Oh yeah, there's you behind the scenes.
Behind the scenes.
Behind my butt.
Shocked that the 300C did so well
in the light.
We're now about to grab the drone shot.
Might probably leave this light up.
I don't think we need to tear it down quite yet.
But we're going to do the drone shot next.
So I am going to get that ready.
Got the kids and then my wife
and her dark druid outfit
and Lucas and the sorcerer.
We're going to do the drone shot.
And then lightning coming down.
So quick lore drop.
The villain in this actual piece
is a circle of the rod druid.
It's one of these druid ideas I came up with
for my D&D campaign as well for these videos.
But it's basically,
imagine that villain from Fern Gully
combined with like a witch doctor
who do voodoo stuff.
That like mucky, roddy nastiness
that comes with rot and filth and stuff
and spread into a druid-esque character
which is the circle of rod druids
which are originated from a swampy area
of my D&D campaign in world.
And I'm hoping to show more of
as part of one of the sets we want to build
is kind of their home base.
But they do come from the swamps
and they're just like that ring girl
combined with like I said,
the Fern Gully villain.
These nasty, roddy kind of characters.
Done with the gimbal shot.
With a nice, oh you can't see it.
New waist thing.
But we're done with the gimbal shot.
And we're gonna start backing up
because day two's done.
And we are hot and sweaty.
I don't know what else to say.
Been really bad at these vlog things.
All right, bye.
Filming reality.
But I wanted to upload the footage
from my FX 30.
The programs were all footage.
And the card B that we shot on today
is fried or something.
Or corrupted.
And there's no footage on there.
I have to format it.
It's not picking up any data.
So all the most of,
a good chunk of what we shot today
I'm going to have to refilm.
So that sucks.
Thankfully I think the drone footage is fine maybe.
But all the lightning coming down.
Lucas walking back in the woods.
Lucas's eyes shedding.
Open up, yeah.
I should probably,
don't know why I'm filming this right now.
But it's probably worth putting in the vlog.
But that was a wasted day.
Originally brought in the footage from the original shoot.
Not the stuff we lost.
Lucas's casting.
And then I did some Houdini stuff.
And then I realized,
is that really tracked very well?
So then I started digging in.
I went through Nu,
going through Synth Eyes.
I realized it kept panning
instead of going in a semi-orbit
like I did with the gimbal.
And I have spent the last two or three hours
trying to figure out why it keeps wanting to pan
like I did tracking Nu.
I used Lightcraft Jet Set.
But I don't think I did the LiDAR scan
so it's making it funky.
And I kept doing it.
I'm bringing in the LiDAR
and everything's causing an issue.
Finally just sat there and was like,
okay, I know how to use After Effects Tracker.
And it worked.
I, yeah, it's not,
it's actually,
you can see the camera over here,
right here.
And I'll see here too.
As you can see,
I gotta adjust a little bit,
but yeah, yeah, yeah.
It's actually working.
And it's doing a semi-orbit.
It just, it's crazy.
I mean, I got all these tools
and I keep trying to like do everything in Nu
or do everything in Synth Eyes
or do everything with just Jet Set Lightcraft.
But sometimes you just gotta go back to After Effects
and use it because you're good at it.
I'm good at it.
And I've been using it for over a decade now.
And it just, it makes my skin crawl
because I want to learn how to use the Nu tools
but I just could not figure it out.
And I was going on chat GT and stuff,
but I figured it out.
It seems like a pretty steady track.
So I'm gonna try to bring in the LiDAR scan.
We'll see how that goes.
One thing I just forgot completely
was the LiDAR scan for the lightning coming,
or the clouds forming above the bad guy.
So I'm headed out here to get a LiDAR scan of that.
It's a little cloudy,
but I totally only had the LiDAR scan of Lucas casting.
I do not have a LiDAR scan
of where the clouds supposed to form over.
All right, got the LiDAR scan of this whole area.
Or at least the one that'll be clovered by the clouds.
And I'm gonna head back to the house.
So this is day three of Call Lightning.
I just got prepped with, set up for camp.
And now I'm just waiting on talent.
This is the last few days.
And we may have a couple of pickups,
but I think this will be it for Mr. Lucas.
But yeah, we're at base camp set up.
I got a couple of wides first.
So I think I'm just gonna kind of like
raw dog it with the lights.
And then when we go to close this with the dialogue,
that's when I'm gonna pull out full 300C with the Fresnel
and maybe some diffusion and stuff.
But so far ahead of schedule.
Didn't film setting this up, but I have negative fill.
We're gonna see if this works.
It's just black fabric, like a black backdrop.
And over here, I went ahead and preemptively set up
my 300C with the Fresnel.
So one of the cool little techniques I've been learning
is using Lightcraft Jet Set to do live tracking data on set.
And you can see me setting up the time code
to hook up to it on the camera.
But I just find it very, very useful
to have that live tracking data from on set.
And then later on being able to bring it up in post.
And it's for the most part, really, really good.
Every now and then I have to track myself
either in Nuke or After Effects,
but for 95% of the time, the tracking is absolutely amazing.
It does require a little extra stuff on your rig,
like a cell phone holder for the iPhone
and a Exxon CMO 4K is what I use.
They work really fantastic.
Like I said, it's really great with the things
of not having to have a ground plan necessary
for the tracking day.
For example, one of the shots I do
is I'm looking up at the sky
and then having the camera go vertically down
to show a lightning strike somebody.
And I have perfect track
because I'm just using the cell phone as the tracking data.
One of the other things you can do with it
is you can use a proxy LiDAR scan
that you do once the Jet Set is up,
which you'll see me do here in the next little bit.
And what's great about that scan
is that scan is tracked beautifully into the shot
once you go later to shoot.
So then I can take a high fidelity LiDAR scan
from like PolyCam or something
that I could spend a lot more time scanning
and bring that in where the proxy was
and get a great surface for projections,
great surface for simulations,
and it looks amazing.
And I can get it on days like a cloudy day
or something like that
and have a really beautiful scan perfectly tracked
and maybe every now and then have to mess with synth eyes,
but for the most part,
it's a very perfect tracked in PolyCam LiDAR scan.
♪ I can see a spectacle ♪
♪ You can have a little faith it never killed nobody ♪
♪ What you waiting for ♪
♪ We're getting closer by the step feels like ♪
♪ It's just getting started ♪
♪ Just getting started, just getting started ♪
I got a little lens swap.
And technically, since these are cinema lenses,
shouldn't have to keep adjusting my settings
for the cinema lenses.
That's why you buy in all the lenses
should like color match perfectly.
♪ I can see a spectacle ♪
♪ You can have a little faith it never killed nobody ♪
♪ What you waiting for ♪
♪ We're getting closer by the step feels like ♪
♪ It's just getting started ♪
♪ You can have a little faith it never killed nobody ♪
♪ What you waiting for ♪
♪ We're getting closer by the step feels like ♪
♪ It's just getting started ♪