How to make a miniature waterfall out of styrofoam

Nature Fish Tank
87 followers
Sep 25, 2025
hi hi hi welcome back to my channel
before we start as usual, don't forget to subscribe and press the bell button
this time we will make a miniature of a diving water, we will make it from a non-used styrofoam material
the first step is to remove the unused part
then we prepare the base from the glass
then we stick the styrofoam material on the glass base using silicone glue
and the next step please watch this video
after the glass is installed, we make the pipe installation for the diving water
then we make the diving water pipe by using styrofoam
make a slot for the power head
the glass in the front of the power head we cover with styrofoam
prepare sand that has been sifted and cement
with a ratio of 2 sand and 1 cement
stir until smooth, add enough water, stir again until the cement mixture is ready to use
then we cover each styrofoam area with cement
here I have prepared a cement root that I have shaped like a big tree
we make a base for the tree, put it on top of the tree and let the cement dry
we continue to cover the inside of the pool with cement
now we will plant a small hose along the length of the pool
to make a small river flow on top of the cover of the power head
at the end of the pool we give a L to facilitate the connection to the river flow that we will make
now we make a space to hold the water before it drops
continue to make the diving water pipe by using styrofoam
cover each side of the styrofoam with cement
after the base of the tree we made earlier is dry, we can immediately put it and pour it so that it merges with the cliff
now we make a cover for the power head
and also make a cover for the water supply room on the top of the cliff
then we give a stone relief so that the cliff is more characteristic
we pour the end of the hose into the styrofoam to connect it to the river flow that we will make
we make the small river flow first
after the cliff is dry, we can immediately color it
first we give a black color to cover the entire surface of the cliff as the base color
as information, the paint I use is acrylic paint
then we give a dark brown paint
and finally we give a light brown color to emphasize the cliff
for the river flow we can give a green color
also for the flow of water, we give a green color
add miniature houses and bamboo ornaments to beautify the cliff
prepare synthetic grass for leaves and bushes
while for the grass to the cliff, we can glue it with silicone glue
then install the power head and don't forget to install the filter cotton
and don't forget to install the connection hose for the river flow
now we assemble the cliff lighting
we can use led led like in this video
add a little stone to decorate the pond so it doesn't look empty
fill the water and let's try it
this is a miniature waterfall with a tourist theme
it's also suitable for us to put in the room with dim light as a night light
watering the water can also be a relaxation after a tiring day of work
