In this video, I’m comparing two powerhouse tools: the Milwaukee 3453-20 12V Fuel 1/4” Cordless Hex Impact Driver and the DeWalt ATOMIC 20V MAX Brushless Compact Impact Driver. Both are incredible tools, but how do they stack up against each other? Let’s dive into their specs, features, and my first impressions!
Milwaukee 3453-20 Key Features:
• Brushless Motor delivering up to 1,500 in-lbs. of torque • Reaches speeds of up to 3600 RPM in Mode 3 • 4-Mode Drive Control with a dedicated self-tapping screw mode • Compact and lightweight at just 2 lbs, perfect for portability and reduced fatigue • Three integrated LED lights to illuminate your workspace
DeWalt ATOMIC 20V MAX Key Features:
• Delivers a powerful 1,825 in-lbs. of torque and 3,250 RPM • Variable 3-speed trigger for maximum control • Integrated 3 LED work light for improved visibility • Compatible with 1-inch bit tips • Best for framing, decking, cabinetry, and more
My First Impressions:
Both tools bring a lot to the table, but they cater to slightly different needs. The Milwaukee stands out with its lightweight design and impressive RPMs, while the DeWalt offers higher torque and a variable speed trigger for more versatility. Which one is right for you? Watch the video to see which driver might fit your needs better!
Let me know your thoughts in the comments—are you Team Milwaukee or Team DeWalt?
we are back with another review and
today we are checking out the Gen 3
Milwaukee fuel the 34
53-20 12vt M12 from Milwaukee without
further Ado let's hop right into this
review and as you can see I
already added a few things to it I got
the left and right Simon tools gen 3
magnetic bit holders I'm not sure which
side I'm going to go with I think I'm
going to rock this side the uh the right
side um I don't usually go this way for
bits I'll usually I'll usually do it
like this um or if I need Fasteners or
something so that's just straight out
the G I've only rocking it for one day
so I'm sure I figure it out anyway um
this was my daily driver right here DCF
A50 this is my awesome Ultra compact
impact driver um and these
two fairly similar not not too far off
but you know a little far off in regards
to Specs but I wanted to check these two
out I did like the way this is compact
in nature and like I said I'm rocking
the DCF 850 so I'm already into the
compact line of impacts so straight up
the gate we'll talk about some specks
between the two of these and then we
drive some some Fasteners we'll do that
um so straight up the gate the 3453 is
just what we'll call this one um for
torque we're talking 125 foot lbs the
DCF 850 is going to put down 153 so
about 25 to 28 more foot pounds of
torque in the DeWalt when it come to
impact per minute though Milwaukee's
putting down 4,000 impacts per minute
dewalt's putting now at
3,800 RPM wise we're talking 3600 with
the Milwaukee and 3250 for the DeWalt
warranties because I know that's huge uh
warrany is going to be 5e with the
Milwaukee and threeyear for the DeWalt
now I did want to do some measurements
here specifically some measurements on
the weight now I know I have those two
Simon tools little bit holders but I
think it'll be
fine I think if
we if we eliminate one of the bid
holders and load up the other one it'll
probably equate in weight so we got 2 lb
8 oz for the ultra compact the
M12 the DeWalt 2 lb 14 oz
so 8/10 of an so just about 2 lbs on
that one so 2 PB 14 ooun so almost
almost three lb and that one's just
about 2 lbs so talking about about 14 o
difference on weight um versus you know
the Deee in the wal so if you're looking
for weight maybe you're
sacrificing well I mean I guess you're
not really sacrificing much except for
torque in the Milwaukee because the
DeWalt is trailing in in ipms and RPM M
and the the warranty so if you sacrifice
a little torque um you get you get a
little bit lighter weight so you don't
have to have such a heavier tool um now
comparing the two I still love my Dall
this is still my daily driver I love
this I like the way it feels in my hand
I like the way that it grips um it's a
nice balanced tool this Milwaukee is
also a nice balanced tool as well I like
how the the grip here is a little bit
wider than standard impact and it fits
in my palm a little bit easier kind of
fits it's well kind of fits like a pew
pew same thing in regards to loading it
um you
know it's it's like loading a magazine
which is kind of cool um I did like the
selector here on the top which allows
you to select between the modes um it's
recessed right there so that you don't
have to worry about accidentally
touching that which is really nice
actually U the DeWalt one is uh previous
gen which is a slider button um the
newer the newer like the 860 uh and 870
HRA quiet hydraulic one those have the
button button switch just very similar
to this but um yeah one thing I did also
want to mention is I like
the the quickload collet which
is real nice just slides right in there
um doesn't really acknowledge that you
put the bti in and I'll show you what I
mean by that the the wal one it kind of
lets you
know that you put it in there and that
it's fastened this one you kind of have
to give it a little tug here I'll show
you that again
so quick load call it both of them have
that
but it slides in really nice butter
smooth you just have to know that if you
push you have you have to know that you
pushed it in all the way to basically um
make that check
so it definitely has some see how it
just torqu out of my hand it's got a lot
of torque in it that's for sure I like
the battery indicator on the side here
it is really nice um to not have to to
push anything it's just kind of always
on um just little differences between
Milwaukee and DeWalt so we'll drive some
Fasteners now and we'll check it out and
see what it can kind of put down I got
got a couple fun things to put it
through so we'll check that out right
now and I'll get
uh camera move down right there Perfect
all right so we'll start off we'll do
we'll do some 2in screws and then we'll
do some 4in screws and we'll just drive
them in we're not trying to do tests for
time here or any of that just kind of
want to see the difference next to each
other we'll do DCF 850
first real nice real nice went over a
little bit too much and that was on
speed two so let's make it fair and
we'll do speed two on the Milwaukee even
though it is 12vt and that was
[Music]
20 little bit you can see you can
definitely feel a little bit less power
when it actually started doing the
impacts um that hit a little bit um
faster when compared to
the BCF 850 we'll do that one more time
you can just hear
it so it didn't actually start doing the
impacts until after
we got the head near the wood so we'll
do the
Milwaukee so about the same that's when
it it started so started doing the
impacts right there does have a loud
ratcheting sound so it is a little bit
louder but what could we say again two
different tools two different brands
we're going to run next we'll
run some deck screws we run some for
deck screws and see if we get any
stoppage
or right there is when impact started
hitting and let's pop it out we assessed
it
perfect and don't actually have a Torx
Milwaukee bit here with me so we'll just
well we're going to reuse the DeWalt one
we're going to use a different screw and
let's check it
out so a little bit a little bit
before a little before we got to the
wood let's try one more time
so just about just about the same time
as the DeWalt was when it started
torquing down on that of course screw
was a little bit hot so went into the
wood a little bit easier that that paint
really makes it slide doesn't it but
yeah I mean straight up if you uh if
you're looking for something that's a
little bit more lightweight than the DCF
850 um that has a little bit better
warranty just a little bit less torque
but pretty much outperforms and impacts
and RPMs per minute definitely check out
the Gen 3 Milwaukee for sure um is it
going to change up my um daily driver
with the DeWalt not really I mean I do
like that I at first didn't even think
it was going to stand up on its own I
thought I was going have to lay this on
its side I do like that it stands up
without having to have that weird Square
battery on the bottom I like the slim
battery on the compact Milwaukee so for
me yeah I'd want to stick with one of
these
cylindrical like magazine Styles so but
yeah nah my DCF 850 is always going to
be always going to be my my goto because
I'm already in the one I'm already in
the DeWalt uh
battery um you know environment if you
would but uh or echosphere whatever you
want to call it but um also I like the
way this performs I like the longevity
of the power stack battery the flat
pouch lithium cells paired with this is
really nice gives us a lot of power um
compared to running one of those
standard lithium um batteries so the
cylindrical cell ones so
yeah which is this this is cylindrical
cell three cylindrical cell batteries
you can see them in there so again
performance you're going to get a little
more out of the DeWalt in regards to
battery life but um yeah perform
Milwaukee perform pretty good what let
me know down the comments below what do
you think of the Gen 3 Milwaukee fuel
brushless M12 impact driver the 34
53-20 is the one that I got here for for
feature here um when compared to the DCF
850 from DeWalt which one's your
favorite which one's your daily driver
which one's your carry for impact and
why do you like it let me know down in
the comments below if you like this
video give it a thumbs up want more
content like this subscribe for more and
have a great of your day