How to Make Macrame Bracelet Square Knot with Beads | Macrame Bracelet Tutorial
Hi Macrame Lovers...
Let's learn to make macrame square knots with beads. This macrame bracelet is made using only one basic macrame knot, the Square Knot. But I added beads above the square knot in the middle of the bracelet.
The materials you need to prepare to make this kind of bracelet square knot with beads are as follows: 1. Korean waxed rope 1 mm (you can use other types of rope) 1 thread x 60 cm 1 thread x 150 cm 2. Beads 3 mm, 19 pcs 3. Scissors 4. Lighter 5. 0.5 mm (gold) rope = 1 thread x 30 cm
The size of this rope is to produce a bracelet with a circumference of 15 cm. You can reduce or increase the size of the strap according to the actual size of your hand circumference.
The knots used in making this bracelet: Square knots and diamond knots If you are still unfamiliar with this type of knot, you can learn about it in my video about basic macrame knots.
Let's see the tutorial until it's finished and hopefully it's useful.
Hey guys, let's make a simple sliding knot bracelet with a single bead in the middle
and two adjustable sliding knots to adjust the size of your bracelet.
For our bracelet design we're using 55 centimeters of one millimeter waxed twine. Now you can cut the
end on an angle if you need to, that makes it easier to thread your bead on. So first up just
placing your bead onto the thread. I've got these cute little heart shaped beads with a hole in the
but you can use whatever bead size or type that you like. Once the bead's on place the ends of
your cord together and bring that bead right to the middle of the thread. Now holding this piece
of thread just to the right side of the bead, holding that point with my left hand and taking
the cord down the back and around my finger two times to make two full loops around. Gently
removing those loops and then bending the end of our cord around, placing it down both loops.
Now gently working this knot down tight onto that spot. Pulling that knot nice and tight and then
you can slide the bead up against it and swap the bracelet onto the opposite side. So again holding
that point to the right of the bead in our left hand, then bringing the cord down the back and
around our finger two times to make two full loops around. Gently removing the loops and
then placing the end of our cord down both loops, pulling it out the right hand side.
This time we gently work our knot tight slowly so that we can pull it tight right up close to the
bead. When it's in position then pull it nice and tight. Now onto the sliding knot part of our design.
So lay your bracelet down on the table with the cords overlapped at the top here and the left
side cord at the top. Now picking it up and holding it in my left hand with this top side cord at the
back, we bring it over the front down and out the back to form our first loop here. And again working
towards the left over the front down and out the back for our second loop here. Now bend the end of
our cord around and place it down both loops, pulling it out the right hand side and gently
pulling this knot down tight and tidy. Now swap the bracelet onto the opposite side, again holding
in our left hand with this top side cord at the back. Now take it over the front down and out the
back for our first loop here. And again over the front down and out the back for our second loop.
Now bend the end of our cord around and place it down both loops, pulling the end out the right
hand side. And this time we're gently going to work our knot down so it sits nice and even with the
knot on the other side. Once you're happy with the position then pull it down tight.
Now we can check our bracelet for size. So extending those adjustable sliding knots
and try it on for size. You can always untie and retie any of these knots until you're happy with
them. But if you're happy with how everything's sitting and they're all sitting nice and even
then you can cut these tails off just outside the knots
and singe with a lighter so they don't fray.
So there's your adjustable sliding knot bracelet with a bead in the center.