Mounting an 18th-century Silk Dress – Textile Conservation Step-by-Step

La Beautes
153 followers
So here we have a sackback dress from the 18th century. It's about 240 years old
and today we're going to do a final fitting before it's ready for display. It's made of
a shot silk which means it's two different colours for the warp and the weft, a pink and a yellow.
Today I'm going to talk about the mounting process to take it from this flat dress you can see here
to the 3D figure that you'll see in the display. So this is the mount for the silk dress. The
first step for mounting is taking initial measurements of the object itself. We realised
quite early on that it's a very small dress, potentially a young adolescence or a teenager,
and so we needed to find the smallest mannequin available.
This is the figure that we used for our silk dress. It's called a petite one. It's a papier
mâché bust form and it has been specially developed for mounting historic objects. It's
got a very flat front, quite a small bust, a very narrow waist and quite a long torso.
Our original wearer was quite short and so we can change the height of the mannequin down the pole.
We added a wadding on the inside and a layer of remé over the top which created a soft but
solid foundation to start mounting. The waist was actually cut away so you can cut straight
into this waist which created an even smaller waist to start from. So we used this polyester
wadding in order to pad out the figure to the specific dimensions. We also feathered the ends
to create a smooth shape and then herringbone stitch across the top to keep it in place.
It didn't need a lot of wadding because the dress is very small and there wasn't much bust either
because the shape of the dress would have kept the front and the bust quite flat. To create the
soft fan shape of the skirt there were a few layers of underpinnings that were created underneath.
The first layer is a hoop petticoat which is narrower at the top than is at the bottom
and has steel rings through each layer. Then there were various layers of net. First of all
a stiff net at the top to create the fan shape and also a stiff net layer at the bottom
to kick the hem out. Then a soft net layer here to create a soft shape
and then a silk petticoat on the top to consolidate all of the layers
and to create a barrier between the net and the petticoat. So the last steps will be to level
off the hem of the underpinnings to make sure none of it is visible underneath the dress
and to add a top fabric which will be a black satin fabric and will be a really nice finish
underneath the dress. We'll only add it to this section here which will extend just below the
neckline so that we only need to use a small amount of exhibition fabric and none of the
rest of it will be seen underneath the dress. So this is the petticoat, this is the first layer
that we will dress onto the mannequin. You can see here it's a rectangle and most of the shape
tying the petticoat to the mannequin here at the waist and then the sides will be gathered in using
The last step would be to just mark in a stitch line where the hem of the dress ends. At this
point you can see that the dressmakers have used a less expensive fabric here to conserve the more
expensive silk that you can see at the front. This section will actually be hidden by the top dress.
So for this last fitting I'm just using a cotton tape to keep the front closed whilst we check for
the final fit. We'll find a ribbon or a cotton tape that closely matches the dress to keep the
bodice closed for the display. To keep handling to a minimum I'm not going to close the centre
front before displaying. The colour of the dress is quite surprising, it's quite a vibrant colour
so we affectionately call it the sunset dress. You can really see here the narrow waist, the flat front
and the fan shape of the dress. You can also see the dramatic shape that the pleats create
down the back of the train and also how full the skirt is at the back.
For a mounting point of view we've created all the supports with the petticoats and the net
underneath the dress that supports the top layer of the dress but the pleats are dramatic all by
themselves. So the importance of what we do is to create a mount that fully supports an object
whilst making it the exact shape and size of the original garment. It's quite a fabulous
shape and the fabric is so beautiful so it's going to look quite spectacular on the display.
