4 TIPS - ONE DAY: Probing, Wrenching, and Chamfering - Haas Automation Tip of the Day
Sep 18, 2025
Today we get to have a lot of fun with an entire junk drawer full of tips. Tips that we ran across
while setting up this single part. We're going to cover things like how to probe the unprobable.
We're also going to show you some of my favorite tools and I'm going to give you my top secret
best design secret. Show you how I kind of spruce up my parts. So stick around.
Everything for me begins with my setup sheet. So check this out. I've got a block loaded up.
Now if you're tightening up those tools by hand. So here's a situation that comes up fairly often
when we try and use a probe or an edge finder to pick up a part. I've got here a little tiny part
that's made out of a great big piece of aluminum and if we try and run the second operation on
this part we just flip it over and put it in the vise. Before we can run op 20 the second part
we need to set the zero and on this particular part our zero is the left edge and the back edge
of this part along those two surfaces. If we come down with our probe and try and probe that surface
though we've got an issue. The probe is going to shank out on that white ceramic shank. It works
when the ruby tip makes contact. So how do we solve this problem? So here is how we probe the
unprobable. We don't. What we're going to do is use a surrogate part. In this case a 1-2-3 block
or a 25-50-75 block for my metric friends. We're going to load that block up into the vise. We can
now probe the side of our block and use that as our work offset. It's going to put our work offset
in the exact same spot it would have been had we probed our real part. So use a surrogate part
that doesn't have the offending feature that blocks our probe instead. While we were setting
up this part we came across a few other topics that we thought were pretty cool and we wanted
to share them with you. One of them had to do with the allen wrenches that I used when tightening up
the part stops in my vise. So here are my allen wrenches. Pretty basic but I wanted to show you
this guy. Now hopefully if you've been a machinist for any amount of time at all you've found
yourself your perfect cheater bar, your perfect pipe. A pretty simple thing but I realized that
this is probably one of my favorite tools in my entire toolbox. When I'm loosening up bolts or
tightening them this is a palm saver. It keeps me from bruising my hands. You want to find a bar
that is as tight as it can go but still fits over your largest allen wrenches, your 10 millimeter or
your 3.8 allen wrench. Just one of my favorite, favorite all-time tools. Make sure you've got one
in your box. And if you're picking out a set of allen wrenches for the first time make sure you
get a set that has the little ball ends on them. These really help when you're doing things
like changing out the jaws in a vise. They can just reach in at an angle and still allow you to
turn those bolts. What I've used more recently are these guys. I've switched to these because
they're color-coded. Not a big difference but I just love these guys because I know that my 5.32
is that little red one right there and I use that one all the time. So cheater bar, gotta have one.
Ball ends on your allens, gotta have them. What I've moved to more recently, more recently,
is a new set because there is something I don't quite like about these allen wrenches and it's
that every time I go to use them I have to move these guys out of the way, you know, move those
three allen wrenches out of the way before I can grab this one that I'd like to use. And while this
is a small issue, a first world problem, I saw a post on a forum online with another set of allen
wrenches and I had to get them. So this is what I bought more recently. It's these guys from WEA
and this is what makes these allen wrenches special. It's that when you want to pull out a
wrench all you've got to do is turn them. So these these wrenches are spectacular not because of the
case. So I just thought it was really cool and thought I would pass that along so I've started
using these more recently. Now talking about allen wrenches seems pretty trivial but it's not, not for
a machinist, not when you're on the machine for a lot of your day. Things like cheater bars really
help especially when we're using something as much as we use an allen wrench. We all become
very comfortable with the tools that are in our toolbox. So be sure to comment. Tell us what tools
you use every day that make a difference, that make your life better. Those are the tools that
we all want to buy. We want to see what's in your toolbox. So this was one little tip but we were
saving the best for last. In the part that we were making, this guy right here, we wanted to show how
to probe right that flange part. So I had to make a part so I made this guy but I wanted to make it
cool looking right. I spent 20 minutes you know setting up the part and programming it, a couple
holes and walking the perimeter. Generic boring part. Typically on a part like this you would just
walk around the outside edge and create a uniform chamfer you know 30 thousandths of an inch, 0.75
millimeter. You just walk around that edge and it's got a boring chamfer but the chamfer on a part is
like the icing on a cake. You can be creative and it really affects the final look of the part. If you
look at this guy it's a kind of a cool looking part but there's nothing fancy about it. I kind
of cheat on almost all the parts that I make to make them fancy. You can see this guy
right here. It looks amazing right. What an amazing cool shiny looking part but one of the key features
of this part is this cool swarf cut around the outside edge right. It looks like a five-axis cut.
It must have been a 3D surface or something right. The tool must have been going up and down around
those corners. That's not the case. My dirty secret is I just give my chamfers their own unique
contour, their own unique cutter path. Different than the contour used to create the outer surfaces.
Take a look at this CAD file and you can see that my end mill walks around the outside of the part
and then my chamfer tool is walking across a different profile that I've created. If we
watch the part run we can see that our chamfer tool is not moving up or down at all on the Z.
It's simply walking around the outside and it cuts in the XY a little deeper in some spots than
others because I've given it its own profile in the cam system. So this is my secret on how
to make cool sexy looking demo parts. You'll realize it's actually pretty basic. It's pretty
simple. So that's all we've got for you today. I hope you picked something up and we'll see you
next time. Thanks for watching this Haas tip of the day. I can't believe we're going to show you
this but it's cool. I had fun with it. This is how you spin an Allen wrench on your finger okay.
So safety glasses, face masks, go try it in the parking lot where no one else is looking.
But if you're going to try and spin an Allen wrench on your finger here's the key.
Find the longest Allen wrench you've got in your set. Not a short one. The shorter the Allen wrench
the harder it is to spin on your finger. You're going to take your Allen wrench,
you're going to have it face away from you and when you spin it you're going to want your finger
to climb up the long end of the Allen wrench. So you face it away and you spin. So you can
practice that. Make sure you're wearing your safety glasses and you can go from there.
And that's how you spin an Allen wrench on your finger.

