The largest bowl I've ever made - Narrated glassblowing process demonstration

Art Creation
8 followers
Hey everybody, welcome back to Glass Goof.
Today we're making the largest bowl that we've ever made on the channel.
This one was a blast to put together and I really hope that you enjoy it.
So make sure you're subscribed to the channel and let's go ahead and head to the studio
and get to work.
So inside this metal box right here called the garage, I have some canes, some little
lengths of colored glass that we're going to use to make our pattern and they've preheated
in here to about 1000 degrees.
So I'm going to pick them up on our metal forks and then I'm going to bring it over
to the glory hole so that we can bring it up to temperature and eventually roll it
up and create our pattern.
So inside of our oven, the burner is on the right side, which basically means that the
right side of this plate will get hotter than the left side because of all the heat that's
coming out of the burner.
So we flip the plate around so that it can get evenly heated on both sides.
As we do that, whenever we come out, we're going to start to compress the canes together
so that they fuse into a nice plate and so that there aren't any gaps in between our
canes.
Here in just a moment, we're going to be rolling this up into a cylinder on a blowpipe.
So we want to make sure that it's a nice flat plate with no gaps in between so that it just
saves us some work in the future.
So now I'm going to make what's called a collar.
I'm going to get a small bit of glass on the bottom of my blowpipe and we're going to end
up blowing a bubble straight through it so that there's no glass covering the tip where
the hole is exposed.
And then I'll use that to roll up our canes into a cylinder around the collar.
So I need my collar to be a certain size.
We need the circumference of the collar to be as long as the plate that we're going to
roll up is.
So I've got a small amount of time that I can shape this up so that it's the right circumference
around so that we get a nice, good, clean roll up.
So now I have the right size collar, our canes are fused, and we can go for the roll up.
A little big, a little big.
So that went pretty smoothly, but the collar was a little bit small.
So what I'm going to do is I'm going to find where the pattern ends and I'm going to cut
off the excess glass so that it still maintains our pattern of color.
Where did that touch?
I'm going to kill it.
And there we go.
So we still have a good pattern, you know, there's no odd numbers of canes or anything.
And now I just have to seal up all the gaps and we'll be good to go.
So now that all the canes are fused, we're going to get rid of a small bit of glass on
the end and seal off our bubble so that it's airtight.
Close stuff too.
Oh yeah.
That's awesome man.
Yeah.
It's so cool.
I'm excited about that.
Now the next step in the process is we're going to go into the furnace again and we're
going to get another layer of clear glass, which is called a gather.
But before I do that, I want to make sure that the outside of my form is very smooth
so that I don't pick any bubbles out of the molten glass that's inside of the furnace.
Any bumps or crevices or cracks when you turn the pipe in the liquid glass will pick up
bubbles so we want to ensure that this is as smooth as it can be before I submerge it
into the 2000 degree molten glass.
So this furnace that I'm gathering out of houses all of our clear glass.
It holds about 700 pounds when it's full.
It stays on 24-7 and it's on at 2100 degrees.
So that new layer of glass is very hot, especially compared to the core of our glass.
So I'm going to use this wooden tool called a block to smooth out that layer and while
it's extra hot I can move it while the inside is cold but the outside is still hot.
And then we'll use our newspaper tool, which is about 12 sheets of your daily newspaper
wrapped up and soaked in water.
The design that I want this bowl to have is I want these canes to start to twist into
a kind of vortex look.
So I'm putting a small handle on it in which we'll use to twist the glass.
So look, she's all like, acting like she's going to fast track me.
Alright, uh, give me one second.
Oh my god, I should have put a glove on.
Woo!
You dipped your hand in water.
I know.
It's too cold now.
But it's okay.
Yeah.
I'll do it again.
I like to sell cheap so it kind of works well.
Yeah.
Did you see it blow?
No.
You can blow.
Off.
You can blow.
Okay.
Off.
No, no, no, no, no, no, no, no.
Not on the camera.
No, no, no.
Uh, can you give me some air Luke?
And on.
Alright.
Off.
Yeah.
I'm going to give you.
Thank you.
Did I say air?
Nah.
I need to jack it down more.
I shouldn't have done that.
A little more on my wrist.
One thing I learned in that class is, you know, if you want it to.
Yeah.
Squeeze it.
Alright.
And that's our color pattern.
It looks fantastic.
This is one of the first times that I've tried this big twist and I love how it came out.
I can't tell you enough how satisfied I am with it.
And so now we're going to prep this for another gather.
So we'll start to cool it down and then once it's cooled enough we'll dip it back in the
furnace for a new layer of clear glass.
Off.
So when I come out of the furnace, I'm going to hold the pipe vertically and let all of
the excess glass drip off.
This is what we call a strip gather.
We have the 12 but it's uh, yeah just the handle.
So that will be the final gather.
We're not going to get any more glass out of the furnace.
And now we can start to turn it into a bowl.
This table that you see me constantly rolling on is called a marvering table.
It's a piece of thick metal that won't heat up so I can roll the glass on it non-stop
back and forth and it helps to cool the glass as well as shape it.
Hot things like to stick to hot things so if the marvering table did heat up then that
means that my glass would stick to it which isn't something we want.
So we want to keep it nice and cold.
Very thick piece of metal.
It's one of my favorite tools in the studio.
This newspaper tool is also one of my favorite tools.
It works similarly to the marver where it's a cold piece of paper so it cools down the
glass in the areas that I don't want for it to expand.
So we cup the bottom while my brother blows through the pipe and it will start to expand
where I'm not touching it with the paper.
So now we're going to put in what's called a jack line.
This is a small little incision that we're going to put right off the tip of the pipe
and this will be where we break the glass off of the pipe once we transfer it to a different
pipe a little bit farther down in the process.
Alright.
Awesome.
Give me some air.
On.
Blow it up some more.
You can blow.
And blow hard.
Off.
And you can blow.
And blow hard.
Off.
Give me some air.
On.
Alright.
Off.
Okay.
So I can chill with this.
You want to bring me a foot?
Yeah.
So on this bowl I want for it to have a small pedestal foot.
So my brother is getting a small bit of glass out of the furnace that we'll then bring
over to add to the bottom of our bowl.
Oh it's moving too much.
Oh it's too hot.
So adding that foot didn't go exactly as expected.
It was a little bit more glass than I wanted and it was very hot whenever my brother brought
it over.
So I probably should have said something about how I want a different bit.
You can always ask your assistants to start over if they're bringing you something that's
not ideal.
But it's my responsibility as the gaffer or the leader who's making the piece to tell
his assistant exactly what he wants.
So if your assistant ever brings a bad bit, too much glass, too hot, you can always tell
them to start over and bring something different.
It's just going to be a little patch.
Okay, what am I going to do?
Ha ha ha.
This looks terrible.
Okay.
Whatever.
The bench is a mess.
And I'll just take some air.
On.
Alright, off.
Give me some air.
So now that we've flattened the bottom of the piece out and we've fixed our mistake
from before with the foot, we're going to set up to transfer this piece to a different
pipe.
This process is what we call the punty transfer.
So my brother has a solid pipe in his hands and he's gathering a little bit of glass on
the tip of it.
We're going to use this glass as glue to attach to the bottom of the bowl and we'll transfer
it from the pipe that I have in my hands to the new pipe.
This way, the piece will be flipped over on the new pipe and a hole will be exposed at
the top where the bubble originally went into the piece.
We will then be able to use our tools to lift up the rim of the piece from that hole and
start to turn it into a real bowl.
So now we're tagged on.
I try as hard as I can to make sure that it's right in the middle of the piece.
Symmetry is key when you're making blown vessels, especially bowls.
So now we add some water, we'll give it a little tap on the pipe, and it should break
right off.
Bowls can be a very finicky form, so you have to use different tools to open them in a particular
way.
This tool is called the soffietta.
You can inflate the piece from the inside.
So I put it on the lip and blow.
So this tool that I'm using now is called the parchofis.
They're basically two long dowels of wood soaked in water that will open the piece from
the back.
I can push from back to forward to try to create the nice kind of line that I want the
bowl to follow.
When you're making bowls, you have to be very vigilant about the speed that you turn at.
Sometimes, the centripetal force will fling the bowl out and it will lose your entire
shape.
Bowls are one of the hardest forms to make in glass.
Bowls have an odd way of getting really big kind of quickly.
This one maxed out our glory hole.
So as you'll see in just a second, this is the biggest thing that I could make because
it's almost barely going to make it out when I come out of the reheating chamber.
So now, the last thing we have to do is break it off of the pipe and transport it to our
annealer to cool down.
So we'll put some water exactly where we want it to break.
My brother has the Kevlar gloves on.
I'm going to tap the pipe, knock it off into his hands, and then we can transport it to
our annealer where it will slowly cool over about 12 hours.
Sweet, man!
Oh, that looks awesome!
Woo!
That was great.
Thank you, guys.
That was great.
Yeah.
Yeah!
And here we go.
So, I love how this bowl came out.
Like I said earlier, this is one of the biggest, if not the biggest bowl that I've ever made.
The pattern looks amazing.
The shape came out better than I could have imagined.
And I just, I was blown away by how this came out.
If you're interested in buying this bowl, there are links below that will take you to
my website or my Etsy page where you can find it for purchase.
