#candle#candlemaking#vlog A big thank you to Abby, Pat, Kelli and the rest of the crew at High Country Candles in Blowing Rock, NC! You can check them out on Instagram here: / highcountrycandles And at their website here: https://www.highcountrycandles.com
(This video is not sponsored - High Country Candles is just a cool small business we encourage you to support!!)
HELLO FRIENDS!! As you may know, I am a lover of all things candle... and thanks to fellow candle enthusiasts that share my fascination with melty, stretchy wax, I’ve discovered the pinnacle of candle crafting, that I HAD to get my grubby little hands on: oh-so-satisfying candle carving. In this video, we ventured into Appalachia, where candle carving pros taught me how to master the craft. After numerous attempts, I think I came out with a winner… right?! What craft should I try next? Or should I just get a bunch of vats and turn into a candle carving channel??
Check out the creators featured in the video here! Discovery UK - / @discoverytv DIMSI TV - / @dimsitv Candle Savvy - / @candlesavvy Tobyscandles - / tobyscandles sunnycandle - / sunnycandle Veija candles - / @veijaeu candlegrace - / candlegrace charlotte martel - / @charlotte__martel Nippon Television News Japan-English - / @nippontvnews24japan HIRO@sea - / @hirosea2016 遊日盟族 - / @遊日盟族
This video is NOT sponsored!!
My Instagram: / safiyany My TikTok: / safiyany Tyler's channel: / @tylerwilliams Our YouTube Shorts channel: / @safiyashorts
Hello, friends, and welcome to my late-night delirium.
Hello, friends, and welcome to another video.
This week, I'm going to be trying candle carving for the first time.
It's going to be just like that movie House of Wax, except without Paris Hilton.
Now, as some of you guys may know, I am a candle lover.
As someone who likes to smell things and light things on fire, I've always been drawn to them,
and throughout our many experiments with making and destroying candles on this channel,
from jelly margarita candles to giant Frank and Yankee candles,
I've also developed an unhealthy obsession with wax.
In fact, I have more than once tried to eat wax, and you know what they say, you are what you eat.
However, there is one candle craft that I've had my eye on since 2018
that has long evaded my grubby wax-covered grasp.
Candle carving, a craft that seemingly combines it all.
Dripping wax, soft, satisfying-looking pieces,
swirled kaleidoscopic colors, strange layered pliable wax ribbons,
which all lead to a beautiful work of art at the end.
It's the visual ASMR meets forbidding food final boss.
But it's been tough for us to find places that teach this craft.
It has its roots in German folk traditions and was also pretty popular in the 1970s,
I think because of these psychedelic vibes, but nowadays, it does seem to be a bit of a lost art.
Though we never gave up searching, and after seven long years,
we finally found an enclave in the mountains of North Carolina,
High Country Candles, that specializes in candle carving.
And they agreed to let us take over their shop for an afternoon
and teach me the secret arts of carved candles,
to see if I could make a candle as beautiful as the ones I've seen online.
But only if I promise not to eat any wax.
Which, fair enough.
So we drove into the mountains to get to Blowing Rock, North Carolina,
which is a very charming small mountain town that I henceforth dub
the candle carving capital of the world.
All right, so we're here in Blowing Rock, North Carolina at High Country Candles,
where I am finally going to be able to carve at least one candle.
I've been waiting for a long time to do this,
and I am hoping that I live up to expectations, honestly, at this point.
High Country Candles is a local favorite which has been in operation since 1993,
and its shop is decorated from top to bottom
with both their beautiful swirly carved candles,
but also other candles too,
which you can shop on their website at highcountrycandles.com,
and waiting to meet us there was our carving guru.
All right, so we're here with Abby,
who's one of the resident candle carving experts at High Country Candles,
and I am here to be your pupil today.
Mold me as if I wore a ball of wax.
And Abby was basically going to be leading us through
a condensed training of how they carve their candles.
All right, so what is up first?
So we are going to get the core wax here and get her strapped up.
Which, no matter what you're doing,
always starts off with a star-shaped wax core.
And before we do anything else to it,
we need to let it have a little hot wax bath.
So it will hopefully retain some heat throughout the entire process.
Because the warmer your wax is to start,
the longer you'll have to work with it when you carve it later.
Now, the candle carving process can kind of be divided into three main phases.
One, the dipping slash layering steps.
Two, the actual carving part.
And then three, the finishing, turning it into a candle steps.
And usually, when you're a complete noob like myself,
they start you off with an apprentice candle.
Which is the same, theoretically, as a normal carved candle.
But instead of layers of colorful wax, it's all going to be white and clear.
And the general technique here is to build the candle with wax one dip at a time.
And then have the water flash cool each layer of wax,
which is what's going to give you that visual distinction between each layer as you carve.
So basically, we're trying to grow our candle,
flash cool it, but also keep it warm all at the same time.
At the end of my hook.
But after 25 total dips of wax,
our candle was ready for phase two, the carving.
And Abby's plan here was to teach me a few basic candle carving techniques
that would, spoiler alert, become the base of the design for our actual colorful candle
we would hopefully get to after a few training rounds.
Nobody freak out, I promise it's not that sharp.
And our first set of cuts were going to be like little petals around the base of the candle.
Now, I was pretty nervous about actually cutting the wax.
Specifically, I was nervous about gouging out too much wax.
But it seems like the trick here is to try and keep your knife as flat as possible
and not really try and cut into it.
Which I sometimes got right and sometimes kind of forgot.
After one row of petals, we added another set of cuts above the ones we had just made.
So we now had two rows of petals.
And once we had a complete set of those, we could start making our design.
The basics of which meant bending the petals we had just made in different directions.
So they meet or kiss the neighboring set of flaps.
This is easier said than done.
Oh, I got you, don't worry.
Because I kept forgetting which direction the flaps should go in.
The same like column is always going opposite ways though.
Okay, that helps a little bit.
Nope, you're so right.
And this one goes towards its friend.
Towards the short friend.
And this one then goes out towards a new friend.
We're just Quakers over here.
We're all friends.
I'm sure we'll figure it out eventually.
All right, so that was the first bends and twists.
The bend and twist.
I've seen worse, don't worry.
She's seen worse.
I'm gonna pose next to this.
Big letters.
She's seen worse.
Next up, we moved our way up the shaft to make another round of petals.
Keep going, I'm just gonna intercept that other cut there.
And stop.
Okay, perfect.
Which we then pulled down to meet their friends reaching up.
Okay, that's a mid, but that's okay.
Hello.
To try and create little Xs, or what kind of look like wax bows to me.
Oh, okay, hello.
She's forming.
It kind of looks like ribbon.
And then we did one more round of cuts even higher.
Though sadly, while cutting.
Oh, you want some more?
It's okay.
We ended up just cutting another flap in the same spot.
It's gonna be a little thinner of a cut, but just-
You mean like this?
Yeah, just cut it right over it.
But I think we had been carving long and slow enough
that our wax was starting to stiffen, hence the falling off.
Just lost a link.
It's fine, it's casual.
We won't talk about it.
So besides getting better, I was also gonna have to get faster.
Especially when we start adding extra steps.
But for now, after some final folds.
You can see that kind of overlaps your first bow here.
Some layers.
Our make-out party was complete.
Okay, awesome.
That's it?
Yeah.
Without all the fancy bits, that's the structure of it.
This is the structure.
How do we feel about building on the structure?
As it slowly spins excellently.
We then cut off the drip stalactites at the bottom.
Oh, you're good.
That's the point.
Those rings are falling.
De-hooked our candle and evened out the base on the table.
Oh boy, I felt that.
Like the jagged bottom like fell down a little bit.
And taking a look at it on the table,
we definitely had a lot of room for improvement.
But also, I feel like it could have gone a lot worse.
Now one of the things with apprentice candles
is that because it's just white and clear wax,
if you really mess up,
you can just melt it back down and disappear it forever.
Like sands in the hourglass.
So are the training candles of our lives.
But Abby thought ours looked nice enough that...
I think that's pretty good.
I think we should keep that one.
All right, we're keeping it.
They were definitely gonna need at least a few more practice rounds.
What do you mean, little friend?
All right, take two.
Hook me.
Alrighty.
Though as I was getting more comfortable with the process,
we unlocked a new problem,
which is that the clear wax was starting to look very inviting.
I know I wouldn't want to be in there.
No, but I get the urge to just put my hand in a lot.
Yeah, it just looks like kind of clear and like crunchy.
New video idea.
Bathing in wax like a capybara at an onsen.
In hot tub.
Just me, neck deep in wax.
Now for this round,
a lot of my focus was about increasing my speed.
Oh, I'm stuck.
You're fine.
Swiggle out.
Okay, we're gonna wiggle out.
Swiggle it out, yeah.
To try and make sure I didn't run out of time to work with the wax.
Okay, the vibes are panicked, but still moving.
Work every frame.
Yeah.
Which didn't make every move feel semi-terrifying and high stakes.
This way to his friend.
This way.
Away.
But under Abby's watchful eye,
I do think we're getting a little bit quicker here.
A water bubble just squirted me in the eye.
I'm moving on.
And also hopefully flatter.
If I remember to keep the knife straight, the cuts are better.
Yes.
Then I immediately forget somehow.
Just like full goldfish brain.
You want to try to do a twist?
Yeah.
Now the new technique Abby wanted me to try this round was the twisties,
which I believe is the technical term.
Push in here and then yep, just go straight down.
Okay.
Where you use like a clay sculpting tool
to peel out what almost looks like a mini hunk of string cheese
and then twist it up like a twizzler.
Like that, right?
And then put it back where it came from.
Okay, and now the top.
Then you also gouge out a little extra bit on top,
peel it down and press it in
to make what looks like a little tongue or knot in the middle of our crescent bow.
Maybe, maybe, maybe.
There you go.
How do we feel?
Now that part wasn't so bad,
but in my general haste,
I did do a weird thing with my top petals
where they ended up kind of long and hanging low like basset hound ears.
So the lower ones need to go higher up.
Yeah, the straighter up.
So we're going to have to fix that
and not with our tiny stalactite fingers.
It's kind of like a tiny hand.
Hopefully final apprentice candle.
I was feeling a bit more confident
and I think I was doing a bit better
as the knife felt more familiar in my hand.
But I still couldn't go on full autopilot just yet.
There was less of a basset hound ear problem this time though
and the twisties were feeling relatively good.
Oh, here it goes.
But at the very end, we added one more addition to the design,
which was a final extra round of ribbons at the top.
By the time I got up there though,
the wax was a little cool and slightly firmer,
which made our rolls a little harder and less delicate looking.
Yeah, they're kind of like Corinthian columns right now.
They're not quite like little baby ribbons.
But after a few hefty looking scrolls,
those were all of the steps Abby was hoping to teach me,
so at least we had made it to the end of the design.
There were some alternative plans had I done worse
that left these out entirely.
Don't get me wrong though,
there was still plenty of room to improve,
but that was going to have to happen
on our actual real colorful candle,
which was up next.
Okay, I'm gonna think about it.
I guess it was now or never.
All right, so now we are moving into
a custom colorful carved candle.
Yes.
Now, one of the best things about carved candles
is that you can customize your color scheme however you want,
as long as you have the right wax colors.
So when thinking about a Safiya carved candle,
I was like, how about like a dark Halloween scheme?
Seems on brand, pretty predictable at this point.
And Abby took her idea and made it into a recipe.
So there's numbers and letters there.
And words.
And this process starts off the same
as with the apprentice candles we just did,
so I knew the way.
Yes, we have to warm her first.
Who holds things like this?
Oh, like, okay, nice.
Okay, we're gonna cross the river Styx, let's go.
So after sending our core down to the underworld,
what's up guys, today I'm gonna be crossing the river Styx.
We were ready to start dipping,
which is gonna be a lot more wax
and a lot more colors than before.
Purple, pink, green, yellow,
those are the only ones we're using,
and white, black.
So, all of them.
Yeah, yeah, yeah.
Our recipe started off with five dunks of purple,
and after the drought of pigment during our apprentice candles,
I was just vibing here, man.
All dips, no thoughts.
Wait, is that three?
This is four here.
We'll do one more after this dunk of water.
And if not for Abby,
I think I would have completely lost count at this point.
Somehow, cannot count.
It's the new Lea Michele can't read.
Sophia can't count.
But after three dips of pink,
we were ready to start mixing some custom colors.
Okay, so certain colors can go into certain colors,
but then certain colors can't go into certain colors,
if that makes any sense.
Love it.
And to create a bit of a more vibrant purple here,
we were gonna do a round of mixing our purple and pink together.
But the rule here is that you have to dip the lighter color first,
and then the darker color second,
because the lighter color won't ruin the darker color,
but the darker color will ruin the lighter one.
So it's pink, then purple, then water.
After that, we did three dips into the white
to add some contrast in between.
Too big.
Just a little too big.
Followed by five dips of normal green,
five dips of yellow,
and then five dips of a slimy yellow and green combo.
Serious like poison apple vibes.
Exactly.
After one more set of the white,
we encased everything in a black outer shell,
because of course we did.
This is where the arm workout really comes in,
because this is the heaviest it's gonna be,
and the farthest you'll have to reach.
Oh, hello there.
And after five dips of that,
I think we were looking pretty good.
Is that it?
Yes, ma'am.
All right, here we go.
So that is our 37-layer carved candle recipe,
in case you have vats at home and are following along.
Now getting into cutting a real candle was pretty nerve-wracking.
Do I remember how to do this?
Like here?
Because unlike with the apprentice candles,
you can't just melt these down.
And I was kind of supposed to be doing a good job at this point.
Thankfully, Abby was still coaching me along the way,
in case I forgot any of our steps.
Away from its friend.
I mean, towards its other friend.
I mean, I forgot our sayings.
Which I was, at the very least, dangerously close to doing.
Okay, that one was a little wonky.
Okay, all right.
Yeah, yeah.
Don't get too close.
Okay, perfect.
We're moving on.
Another thing that was different this time,
was that there was literally a lot more wax on this candle,
and the wax then stayed hotter longer,
because there was more of it.
So the knife was gliding through a little smoother.
And as I moved up the candle,
I didn't feel like I was losing a lot of heat.
But I guess that makes sense.
Kind of like how you let your leg hair grow warm for swim practice,
and then shave it before the meet,
you practice with the harder candle.
Now another key thing here,
was that we switched up the order of the scrollies and the twisties.
So we added those final little ribbons at the top first,
just to make sure the wax would still be warm.
Which did lead to much more delicate curls.
And now that there was a multi-colored aspect,
I feel like you could really see the appeal of the twisties.
Kind of like goth candy cane vibes.
And hey, I don't think that went too bad.
Now because there was a lot more wax on this candle,
there was also a lot more stalactite dripping at the base.
So when we cut it off this time,
we weren't left with just a tiny chicken foot,
but rather enough weird tendrils to actually make a bonus mushroom stump.
He's both cute and cursed, just my style.
Have you seen him?
Now there was one additional different thing we had to do with this candle.
So once we flattened out the base,
we had to dunk this whole thing into a bucket of acrylic wax.
Which is essentially a coating for the candle that will cover the carved design.
And basically make it so that the exterior won't melt.
So you can burn the middle part of the candle,
but the design on the outside will survive.
And as the core burns, the flame will glow from within.
And I have to say, I was overall pretty impressed with us.
And I think Tyler was the most surprised with how well everything went,
as he had been pretty stressed out the whole time.
For those who don't know,
Captain Lee is the lovable grumpy captain from Below Deck,
known for such missives as,
you couldn't get a pin up my a** with a sledgehammer while approaching a narrow jetty.
One can only hope to relax over time.
Now we did do pretty well there,
but I wanted to get another carve under my belt just to see if I could do any better.
Now as I already knew the recipe,
I blazed through the dipping here almost too fast,
so when we got to the cutting, the candle was really warm.
So while the steps were becoming more second nature,
a new problem had emerged,
which was that our petals started blossoming too vigorously.
And were falling all over the place.
And because the petals had flopped open like a goth banana,
it had kind of messed up the wax at the bottom of the candle.
So out of the molten wax and into the fire, as they say.
Now even though this wasn't my best work,
we did decide to put on the final touch of the signature high country candle design.
So once I was done with all of my steps,
Abby stepped in and added a little spirally rose to our candle to button our longer bows.
So candle two was good on Abby's part and a little less good on my part.
Though at least I was able to improve with my acrylic wax plunging.
Now just for my own edification, I did want to do one more candle,
hopefully with the roses, but ideally without the banana hinge problem.
And at this point in the night, though knowledge and skill level were increasing,
mental capacity and physical ability were both seriously waning.
But we locked in here and pulled out one heck of a carved candle, if I do say so myself.
And though I'm going to be taking all three of these home,
see, it seems really dumb, but it really helps.
I do think this one is probably the best all around.
I feel pretty happy about this.
I'm very happy about that.
It looks pretty good.
That looks very good.
Now our candles weren't fully done,
as the acrylic wax does have to harden for about a day before it's fully solidified,
so we were going to leave our candles in the shop overnight
and come back in the morning to claim our prizes.
Though it wasn't easy to pry me away from my creations.
I have many things yet to learn.
So now I feel like I want to do more.
I mean, it is kind of addicting.
The wax is warm and soft and so fun to slice.
It was pretty much just as good as I had imagined it would be.
I do kind of want this set up though, Ty.
Can we just get like a few baths?
Yeah, just a few.
Just a couple.
Just a couple baths.
Subscribe for more vat content.
Now when we came back the next morning,
the candles were looking beautiful and very shiny.
In the light of day, I still think they look pretty good.
There are a few things that clearly I could improve on,
but hey, I learned a new one today.
The stripes and swirls make them kind of look like ornate black licorice sculptures.
Wait, no, I can't eat them.
Okay, how about goth Rokuko hairstyles of some kind?
But one thing is for sure, I am never gonna light these on fire.
Maybe for one shot, but it will never touch wax.
The flame will be on for 25 seconds.
I know the acrylic wax is supposed to protect the design,
but I just want to be safe.
No, I'm never gonna light it.
Come on, guys.
This is for looking.
It's not for warmth or for light.
It's for looking.
So thank you to Abby for all of her help.
Abby was an amazing teacher.
You did absolutely amazing.
So thank you.
I was fishing for a compliment there.
No, but seriously, thank you so much.
Oh, absolutely.
Anytime.
This was, it was, it was actually kind of a dream come true.
And thank you to High Country Candles for having us.
Make sure to check them out if you're ever in the area
and support them on their website at highcountrycandles.com,
where you may or may not find a goth carved candle or two.
Thank you guys so much for watching.
If you liked that video, make sure to smash that like button.
And if you want to see more videos like this,
make sure to smash that subscribe button.
And we will see you guys next time.