Wolves 2023

The Art of Sculpting
60 followers
Today I've been working on a fantastic commission of six
life-size wolves which I'd like to show you in my studio.
So it's been a great commission. I have been working in my usual way so inside every wolf
there is a steel armature and the armature forms a skeleton to support the clay.
So anatomically the armature needs to be correct from the word go and then I've built up
the sculptures out of clay. There's about a ton of clay on all the wolves
and I've got three, not three, I've got six very different stances. I want each wolf to
have a very different character and to be doing something sort of different.
The modelling, the sculpting, I try to keep it really loose so working in a lovely wet
clay which because it's wet and it's soft you can work very quickly with it and you can get these
lovely fluid gestures which are sort of often very unrepeatable marks and I try and make a
surface which is sort of tight with sort of bone and muscle quite closed and where there's
a great density of fur and it's very light there's a more open texture. So when you're
looking at this from a distance it will read as ribs and muscles and shoulder blades and fur.
So each wolf I hope has a slightly different character.
I've made the claws out of resin so there's 108 claws which if I'd made them out of clay
every time you wrap the sculpture up you'd damage it but because I've made them out of resin
it just makes the whole process a bit more durable. I make them on rotating turntables
so that I can work all the way around the sculptures. Quite often I'll put the sculptures
in different parts of my studio just for a sort of change of scenery and taking a fresh look at
things. They're very much at the stage where I think they're finished but you know quite often
I'm just going to grab a piece of clay. I will still see marks which I don't like so
I don't think this area here is really very well. There is a muscle that comes down here
and there's another muscle that comes down here but it's just a bit too strong visually so I'm
just going to break that a bit and then the next stage is to make a mold and get to the
foundry that's going to be an interesting one on the back of my van and cast them into bronze.
