This Watch Isn't Like Anything You Have Seen Before - German Made Titanium Modern Sport Watch

Clockwork Chronicles
19 followers
#Sports watch #germany
This Watch Isn't Like Anything You Have Seen Before - German Made Titanium Modern Sport Watch
Link to the Kieser Tragwerk - https://kieserdesign-shop.de/en/produ...
If there's one thing that I love about having a YouTube channel, it's being able to showcase
watches like we're looking at today.
Something that you have probably never seen in person, maybe you've never even heard of
this brand.
The brand we're looking at today is a German brand.
They are making their cases in Germany.
Their dials, their hands, their indices, all the components except for essentially the
strap and the movement are being made in Germany by a team of three people.
It's a modern design in a sports watch that's a little bit wild and I have one hands on.
It's from the brand Kaiser Designs.
So let's flip the camera and take a look at an extremely unique watch that isn't like
any other.
I feel like this is what my YouTube channel is all about.
This is a brand you've probably never heard of.
If you have heard of it, you've probably never seen one hands on and you've definitely never
seen one in person unless you have purchased one.
This is a very obscure, independent brand from Germany and they are a brand with a really
great story.
What they are making here is a very modern watch in Germany, which is not very typical
I would say, and you're getting a 3D printed case.
Now, that's not really the interesting part of the story.
So this case is sort of an exoskeleton.
There's an outer portion, then there's an inner portion.
That inner portion houses a movement and they are trying to make their own movement eventually.
This is featuring a Sleeta SW200 with a custom rotor.
However, that's not really the big story here.
What the big story is, is the overall design and case and the amount of work that actually
happens in Germany.
I talk about here on my channel very often where components are actually crafted.
This is almost fully crafted in Germany.
So that exoskeleton made in Germany, that case made in Germany, the hands, the indices
made in Germany, the dial made in Germany, the case back, the buckle, all of it made
in Germany.
There aren't many brands out there that can claim that they make their entire watch or
almost their entire watch in the country of origin.
And they are trying, like I said, to go further with that.
This does get a Sleeta SW200, which is a Swiss movement.
It's not a bad movement at all.
I've featured them very many times here on my channel.
It's a workhorse and it is very reliable.
And that's why they went with the Sleeta SW200.
This is somewhat of a sports watch, kind of what they were going for.
You are getting 100 meters of water resistance with this watch, which from the look of it,
you would think it would only have 50 meters of water resistance because it's kind of technical
looking, not a sports watch right at first glance.
Like I was saying, a very technical case here.
This is 3D printed and then hand finished by a goldsmith in their studio in Germany.
So in other words, when the case is 3D printed, it does come out a little bit rough.
I've felt cases that were 3D printed that are slightly rough, but you wouldn't really
notice it, if that makes sense.
But they're taking it a step further because they want the quality to be extremely high.
They have hand finished each one of these cases.
There's a chamfered edge.
That is all done by hand.
Then they are hand anodizing all of the dials and the case backs.
Because look at this case back.
It looks fantastic.
This is all milled.
So there are portions of this case that are milled.
There are portions that are skeletonized.
That's mostly the area that is 3D printed.
This portion is milled and then it is engraved and then it is anodized.
So you have this blue on the back that is bright, just like the dial.
This is in grade five titanium, which is a very important element to mention here because
Grade five titanium, a little bit harder to work with and overall it's more scratch resistant.
You can see there's four screws here.
That is what's holding the outer case, that exoskeleton, to that central case.
So really this is like a two piece case and then you have a sapphire crystal on the front.
This gets 100 meters of water resistance because this is technically a screwed in case and
you have a screwed in crown.
So you're getting 100 meters of water resistance.
By the way, the buckle also in grade five titanium and it is very bespoke.
And if you flip it over on the underside of the buckle, there's a little area that is
a little bit rougher than everything else.
That is unfinished.
That's the reason why they did that.
Also it adds a little bit of grip to the underside of the buckle, I guess.
And it just lets you know that that's what it originally would feel like.
But they have hand finished even the buckle on here, the case, everything.
The other elements here that are milled are the crown and you do have their logo, which
is a dragonfly.
So their logo is a dragonfly and you have the dial.
The dial is extremely impressive.
This dial gets 250 operations done on it.
So in other words, these little dots that you see on the dial are individually drilled
into that dial, which is pretty impressive.
And it looks fantastic.
It looks almost like a honeycomb and they carry that through the strap because you do
get an FKM rubber strap and the back of the strap obviously has that honeycomb pattern,
which they're taking inspiration from the dial.
And then again, you have that dragonfly on here and that honeycomb pattern there as well.
So basically carrying that through the entire dial and strap.
I like that.
And the case back.
So very cool that they've done that.
And then the indices and hands.
Those are all milled as well and filled with loom in their studio in Frankfurt.
So I mean, lots going into this and lots of details.
Each one of those hands and those indices are hand finished, so you're getting a lot
of hand finishing on a watch that looks like something that you have never seen before.
Turning it on its side, you can see it's not all that thick.
You're getting that 100 meters of water resistance.
It's got that Sleeta SW200, but it comes in at around 11 millimeters thick.
It's just under 42 millimeters in diameter.
So it's 41.9 millimeters is what I measured.
And then the lug to lug is just under 50 millimeters.
Now that sounds like a lot, but it's not because since this is technically an integrated bracelet
or integrated strap watch, you can see here, they basically fold down straight down from
the case.
So this is a true 50 millimeter lug to lug.
And you sort of have a barrel case is what I would call it.
Even though these are lug structures, they're technically not really lugs.
It's almost like straight ends on here, but the strap does integrate slightly into the
case, so it makes it wear overall smaller.
And since you have these evacuated areas on either side, and of course through the entire
watch, it looks lighter and smaller on wrist than that dimension.
On my wrist, I have the ERA Field Watch, the M1, and this is a really good example of lug
to lug.
So this is around 48 millimeters lug to lug, but it has integrated ends on this strap.
So it wears a lot bigger than 47 millimeters or 48 millimeters.
It probably wears around a 52 or 53 millimeter because of the way that the strap interacts
with that case.
And there it is on my seven and a half inch wrist.
Like I was saying, this is under 42 millimeters.
You have about a 50 millimeter lug to lug if you measure it from the furthest point
on each side.
And then you have an 11 millimeters thick.
I think it's around 11.1 millimeters thick, 100 meters of water resistance, a flat sapphire
crystal with AR coating, a beautiful anodized blue dial, and it is a very vibrant blue dial
that matches the strap.
And then of course you have that 3D printed exoskeleton, that milled center case.
The dial is milled.
All of the indices are made in Germany.
Everything here looks way more expensive than its price point.
Even though this is not a cheap watch, this looks a lot more expensive than it actually
is.
And we'll talk about price in just a few seconds.
And there you go.
There is lume on here.
Like I said, this is technically a sports watch, I would say.
There is no lume on the seconds hand.
Of course, I would like to see lume on the seconds hand.
Again, that is a personal preference that I bring up with almost every video that I
do.
I like to see that my watch is working in the dark.
But besides that, I have no complaints about this watch because it is so creative.
It's really innovative in the design and the overall layout of the watch and how they've
actually created the watch, I think is very interesting.
They are a husband and wife team.
I've spoken to both of them.
Very nice people.
And obviously, they have one other person that helps them.
That's the person that actually finishes all of these cases.
They also make a very low production number of watches.
This is limited to only 25 pieces.
So if you want one of these, definitely check out their website.
They have some pretty cool watches on their website.
This is their latest edition and it is limited to 25 only.
So I would highly recommend checking out their website if you are interested.
The price on this is between $4,300 and $4,400 depending on the exchange rate.
Yes, that seems like a lot of money.
However, again, you are getting a grade 5 titanium case that is extremely bespoke.
You're also getting a dial that is made in Germany.
It is actually hand dyed in Germany or anodized in Germany.
So all of that being done in Germany obviously is very difficult because they have to do
this all from scratch.
They have to create the processes to do it in-house.
So this is technically mostly an in-house German made watch except for the movement
which is a Sleda SW200, a very high quality Swiss movement as we all know that is very
reliable.
Tell me what you guys think down in the comments below.
This is what I love my YouTube channel for because I get to bring watches like this.
This is something that you've probably never seen before and you may never see in
your lifetime because there are so few made.
They are such a small brand that they are very rare.
This is a very rare watch that is very interesting at the same time.
Tell me what you guys think down in the comments below.
I want to hear from you guys.
I will put a link to their website to this watch down in the description below.
Definitely check it out if you are interested.
Anyway, guys, thank you for logging on.
Thank you for watching this video.
I will catch you guys in the next video.
