Friction in a Round Pan Part 1

Terrific Physics
40 followers
4 Video Views·Sep 14, 2025
Challenge. Roll a marble in a round pan.
What made the marble stop rolling? There's a force at work between the marble and the round pan.
That force is called friction. Friction is a force at work in the world around us. Anytime two
surfaces rub together, rub my hands, friction is at work. The marble rubbing against the round pan,
friction was at work too, slowing that marble down, ultimately causing it to stop.
And today we're going to use the force of friction to change how this marble moves
around a round pan. The materials we need for this are simple. We need a ruler that
measures centimeters, a cardboard tube, a marble, a binder clip, and a round pan.
So we want to see how many times our marble will roll around our cake pan. That's why we have this
little mark here so that we can count how many laps our marble does. We also want to be able to
make sure that marble is rolling with the same amount of force each time. If I just pushed it
with my hand, I could push it harder one time compared to another. So I'm going to create a
little sliding board or ramp with my cardboard tube and my ruler with centimeters. This will
allow me to change the height of my slide or ramp and compare the data and results. So I'm going to
start right at 13 centimeters, take my binder clip. So I have my slide or ramp right at 13 centimeters
and I like to use this little tag or mark as my starting point. So I'm going to line up my ramp,
hold my ruler, and now I'm ready to roll. Drop the marble down once, twice,
three times, almost three and three-quarter times around my pie pan. Now I want to start by saying
that this round pan feels smooth when I rub my finger against it. There's not much friction there.
I wonder what would happen if we change the friction. To do that, we're going to use different
materials to change the amount of friction. I have some rough sandpaper. It feels very rough. I have
some velvet and I have some foam core that's smooth on one side but sticky on the other. What
will happen if I put these different materials in the bottom of my round pan and roll my marble?
So let's start with the sandpaper. Now just by feeling the sandpaper, it feels rougher, which
tells me it probably has more friction. So what do you think will happen with our marble? Keep in
mind, I'm not changing the height of my ramp. It's still at 13 centimeters. I have my sandpaper in
and I am ready to run the experiment. Let's roll. One, not even two times around. Remember the last
time it went four times around, almost four times. This one did not even go two times around. Let's
give our marble a roll. Once and a little bit. So our normal round pan, the marble went around
almost four times. The sandpaper was almost two. This one just a little over one. Why is the marble
not rolling as many times around the pan? The answer is friction. So now it's time to try the
foam core. The foam core has a smooth side and a sticky side. Let's start with the smooth side
first. Here we go. Still at 13 centimeters. Let's give our marble a roll. One and a half.
Somewhere around there. Now it's time to try the sticky side.
All right. Still at 13 centimeters. Lined up my starting mark. Let's give it a roll.
That marble didn't even go one time around the pan. Why? Well, because the friction was a lot
more with the sticky side of the foam core. So we played around with friction to see how many times
the marble would roll around our round pan. But I wonder what would happen if we added energy to the
marble by increasing the height and the angle of our slide to give it more energy? Would the marble
actually roll around the pan more if we added more energy? Well, that's coming up in part two.
If you want to learn more about friction or anything science related, check out our YouTube
channel, Fun Science Demos. Science is so cool, especially when it makes some noise.
