Sculpting A Small Portrait By Hand

The Art of Sculpting
60 followers
Oh, didn't see you there. I'm Andrew Joseph Keith and in this video I'm going to teach you how to
sculpt a simple portrait from imagination. Let's get into it. The clay that I'll be using is Chavant
NSP medium clay. Now this is the medium I've mixed in a little bit of hard just because I prefer a
firmer clay. That does make it difficult during the beginning stages. So sometimes I'll take a
heat gun and just warm up the surface of the clay a little bit just so that it's a little bit easier
to work by hand as I start. And the only tool I'll be using is this simple butter knife. Today I'll
be using about as much clay as can comfortably fit into the palm of my hand. Once we've got our
clay the first thing I like to do is form a long rectangular piece that'll represent the neck of
the portrait. I'm going to make this just a little bit longer. There we go. Something like that. Now
I'm going to take another piece of clay and wrap it around the neck and this will represent the
chin. That chin coming forward. And we can do the same thing. Add a piece of clay to the forehead
and then one more for the back of the head. There we go. Isn't that nice? Now we can take some other
small pieces and clean up the shape of the head. Notice that at this stage we're sculpting very thin
just a pancake of clay. Can you hear those crickets chirping away? Delightful. Remember that the neck
tilts forward when looking at the head from the side view. There's a tilt to it. Let's be sure
that we include that. I'm going to add just a little bit more clay down here where the neck
transitions to the upper part of the chest and the upper back. Something like that. Now we can
take some additional pieces of clay and add it to the back of the head. Back here. This is going to
be the thickest point of the skull when you look at the head from the front view. I'm going to add
that to both sides. Just placing those pieces of clay and then spreading them out. We're going to
do this on both the left and the right side of the portrait. Isn't that nice? Just a little bit
more. There we go. By holding that extra clay in my hand, keep it nice and warm and soft so that it's
easy to take little pieces and add them where I want them. I'm also going to thicken up the neck a
little bit to give some more support to hold on to the sculpture while I'm sculpting. Here you can
see what that's looking like. From above to that back of the head looks like a bulge. So let's
taper that towards that front center line of the portrait. You can do that by just adding little
pieces of clay. Spreading them out to create a wedge shape that tapers towards this front center
line. This is a great exercise to do if you're just sitting somewhere listening to a lecture
or music or a podcast and you're just the type of person that likes to keep their hands busy
while you're listening. I don't know about you, but I always feel like I can retain more
information if I'm busy doing something creative with my hands while I'm listening. There we go.
That's coming together nicely. Let's clean up that outside outline of the portrait and soften
this transition between the back of the head and the neck. And up to this point, I haven't decided
whether I'm sculpting a male portrait or a female portrait. Let's just keep it ambiguous at this
point. Like those obese somethings that you sometimes see walking down the street. Don't
know if it's a man or a woman and I think sometimes they like it that way. Just to confuse people
and keep you guessing. Now I'm starting to round things off and also think about some of the forms
like the trapezius muscles that come down and smooth out that transition from the neck to the
shoulders. Little pieces of clay to smooth things out. Let's make sure we get a nice taper towards
that front center line of the face. There we go. That's looking pretty nice and you can see we're
just taking our time trying to solidify that structure of the portrait. Don't be in such a rush
to get the clay on. Sculpt nice and thin. There we go. For this we want to keep that center line
nice and clear and keep things symmetrical from side to side. Sometimes people are so overzealous
to get the clay onto the sculpture that they mess up these primary forms, this underlying structure
and if you do that it's very difficult to sculpt accurately in a way that looks good
for the rest of the sculpture. Now let's get to the fun part. The profile. You can build out the
profile by taking even smaller little tiny pieces of clay then wrapping them around
that front profile. There we have a representation of the chin.
For the mouth I like to do this. Just a simple rounded shape that represents the dental mound
of the teeth. Also called the tooth cylinder. Something like that. We're keeping things
very simple at this point. Let's also add the nose. Things might look funny as you first add
them on. Just push them around until it feels like things are working again. If I feel like
the facial features are becoming too large I can shrink them down or I can simply add more clay
to the back of the head to make the entire sculpture larger. At this point it should
be a little bit less ambiguous whether this is a man or a woman. So I guess we have to make a
choice. I've just used my fingers to smooth things out. Remember this is the kind of sculpture that
you do when you just have a little bit of clay on hand. No tools. Maybe you're taking notes
in class or sitting in church. Whatever it might be. Let's see if we can do more of a feminine
female portrait because they are typically more difficult in my opinion. Also more interesting
and more beautiful. Adding more clay to the top of the head to make sure that it's rounded off
correctly. There we go. Now let's go ahead and add three anatomical features that will start to
give us a sense of the anatomy of the portrait. We can start from the bottom and move our way up.
The first anatomical feature which will represent with a cylinder of clay is the jaw line.
Also called the mandible. Something like that. Now because this is a female portrait we want
to make sure that this remains nice and thin. You can add that on both sides. There you can see
that jaw line which looks a little bit large. So let's go ahead and add the next feature
which is the cheekbone. Also called the zygomatic bone if we want to get anatomical.
That's just below the eye socket behind the nostrils and it travels up back towards the ear.
Let's go ahead and add that a little bit more and the same thing on the other side.
So there's that second anatomical feature and the last one will be at an angle. A little bit
different. Coming towards the mid part of that cheekbone. This is going to represent the brow
ridge or the outside portion of the eye socket. There we go. Those three lines of clay that I
like to start with. The jaw line, cheekbone, and brow ridge. We could also take a piece of clay
and lay it moving towards the back of the skull starting at the outside corner of the eye socket
wrapping around. This is called the superior temporal line. It's a nice rhythm to add in
just to give us some additional information on what's happening with the portrait.
You notice I'm sculpting very abstract, very simplified, just pieces of clay
to represent these anatomical features. Not thinking about the separation of the lips,
the nostrils, the eyeballs themselves. All those details will come in time.
We really want to make sure that we have this structure working and accurate before we worry
about any of those details. The cheekbones will be the widest point of the facial mass of the skull.
That's this front area. But remember the widest point towards the back of the skull remains
back here. The widest point of the whole skull when looking at it from the front view.
Just back behind the ears. You can start to thicken up that widest point
back here and start to think about the portrait from the front view.
Making that look accurate. So far it's looking thin which is exactly what we wanted.
Now we can start to thicken it up. Just one piece of clay at a time. We're not in a hurry.
Add some more to that superior temporal line. Thicken up that just a little bit more.
Then we can start to round off towards these high points of the skull that we're laying in.
More mass on the cheekbones. Try to avoid straight lines. Here you can see how this
cheekbone is wrapping up and around this way. The superior temporal line is wrapping down.
There's kind of these rolling rhythms in the portrait. That's what helps make it interesting
and dynamic. Feel lifelike. There's not a lot of straight lines in the body or in nature.
Typically there are organic forms that balance each other out. There we go.
Now I can start to lay in pieces of clay in between these high points
to smooth out the transition between the forms. At this point those eye sockets may look
kind of depressing but we'll be fixing that in just a little bit. This is coming along nicely.
The fun thing about sculpting is there's always something to learn, something to improve on,
something to get better at. Adding some clay to smooth out the transition between
that cheekbone and the jawbone. Add some more roundness to the mound of the mouth.
Right there like that. You can see at this point the portrait is starting to feel very skeletal,
very anatomical. That will soften up as we start to add the details and smooth out these
transitions between the high points that we've laid in. We can start doing that now. Little
small pieces of clay. It's fun to see how detailed you can get just by using your fingers,
being thoughtful and intentional with where you add each piece of clay. Add a little bit of clay
here under the chin to soften that up just a little bit. Typically a little bit of roundness
to this bottom area of the chin, even for thinner people. Now I'm looking at it from the front view,
from the side, just asking myself where does it look uneven? Does it look like there needs to be
thickness? Sometimes this form of the cheekbone wraps up a little bit. There's a fat pad on either
side of the eye sockets. It's called the lateral orbital fat pad, if I remember correctly. It
softens this transition. You can also look at the portrait from below, from above. That will help
you to catch any asymmetries or mistakes that you might miss if you just look at it from the side,
from the front view. And just drag our finger. I guess it's not our finger. We're not communists.
Dragging my finger over that bridge of the nose to clarify what's happening with the nose.
Now it's coming along nicely. Still taking my time with each piece of clay,
trying to be thoughtful as I'm rounding off these features. And it still feels very skeletal at this
point, very structural. Let's go ahead and add an indication of where the ears are going to be.
Do that by just placing little pieces of clay in the shape of a slice of apple or a section of
orange. Just placing it where we think that the ear should be. And we can move it around if it
looks like it needs adjusting. Take another piece, wrap it around. If you like this type of content,
be sure to like the video. Subscribe to the channel. Hit the notification bell to be notified
of my future videos. Some softness to these cheeks. I think that'll help, but it's a little
bit less creepy and zombie-like and more like an actual human portrait. Also add some clay here.
Smooth out that separation between the jaw and the neck. There you can see the difference between
that side, this side. Just adding some clay, smoothing that out. Let's add the ear to the
other side as well. Look at it from above to make sure that we're adding the ear in the same place
on either side of the head. From the front view, from above, and from below. That gives us a good
idea if we're placing those ears in the same place on either side of the head. Any asymmetry
in the portrait will just be a distraction. Keep it from being attractive and interesting.
We'll try the best we can to even things out. You can see that by being very slow and intentional
with each piece of clay, I'm able to maintain the structure and the symmetry of the portrait,
which are things that I might lose if I was too quick to put on new pieces of clay.
When you're trying to sculpt without tools, just by hand, you want to keep things thin
because it's easier to add the forms by adding clay than it is to remove clay, especially if you
don't have a tool. Your hands are the tool. You're the tool. I'm the tool. We're all tools. Let's go
ahead and add the nostrils. Nostrils will travel back away from the tip of the nose,
and they'll travel back behind where the nose transitions to the upper lip.
Usually the distance between the tip of the nose and the back of that nostril
is right in between where the upper lip transitions to the nose. Common mistake is
to put those nostrils too far forward in space, but they travel back quite a bit.
Something like that. Now let's add a piece of clay to represent the upper lip.
Trying to do this carefully, forming it in place. If I need, I can take my fingernail and just push
the clay down. Give some space for that lower lip just with that fingernail. In this scenario,
we don't have any tools. Just a piece of clay in our pocket wrapped in some plastic wrap or
in a Ziploc bag. Not too thick, otherwise it starts to look like a mustache. We prefer our
women without mustaches. If there's too much clay in some areas, you can use your fingernail just to
pull away the clay in these corners of the mouth. Tiny pieces of clay. That mouth is still looking
very masculine. Push up the corners of the mouth just a little bit. Feel like it's a very somber
looking face. You don't need that. There's forms that travel towards the outside of the bottom lip
down around the chin. I'm going to go ahead and add those in. Now I'm trying to push and pull
things around. Making small adjustments to try to make this look a little bit less like a hideous
beast or a zombie and more like an attractive female portrait. Just pushing things around.
I think something that'll help is to go ahead and add in the eyes. To do that, I'm just going to
take a little ball of clay, press it into the eye socket. We'll do the eyes closed this one because
it is very difficult to sculpt the eyes just by hand at this small scale. Just take a little bit
more clay, add it on, leaving that deep shadow under the eyes to make it look like the eyes
are closed. You can also add a little piece of clay here on the outside of the eye socket.
Then another thin coil of clay for the eyebrow. Let's try to do the same thing
on the other side as well. Starting with a little ball of clay to go into the eye socket.
Push that down. We're trying to match these as close as possible. Coil of clay, a little bit of
clay on the outside corner of the eye socket, and a nice thin coil of clay for the eyebrow.
We're starting to run low on clay. This is our handful or fistful of clay that we started with.
So let's see. Let's go ahead and clarify the sternocleidomastoid muscle that starts
at the back of the ear, then travels down towards the pit of the neck. It's a great
anatomical feature to be aware of. We can just clarify that just a little bit. Take some of the
clay from the bottom here, thicken up the neck in some areas. Still a little bit too thin.
Add that sternocleidomastoid muscle on this other side. Just pulling away some of the clay with my
finger, that pit of the neck. There are some nodes around the outside corners of the mouth. I'm just
taking little pieces of clay, adding in those nodes. Also going to add just a little bit of
clay inside the eye socket right there. Do that on both sides. That top inside corner of the eye
socket, the nose transitions to the brow. And then lastly, let's go ahead and do the hair quickly,
because let's imagine that we're coming to the end of the class or church meeting or
wherever it is that we're sculpting this quick head study. I'm just going to do a bun. Nice easy
bun. Got her hair up. Okay, and there we have a little fun portrait sculpture. Is it the best
portrait sculpture I've ever done? No. Is it the worst? No. Is it the one that I did for this video?
Yes. Do you need to know the answers to any of these questions that I'm asking?
No. Still a bit of a masculine looking female portrait, but I think close enough.
If you'd like to learn more about traditional clay sculpting, I hope you'll check out my online
sculpting courses. The portrait sculpting course is a great resource if you'd like to study the
of the portrait. We go over the structure of the skull, the muscles of the face, the fat pads of
the face, the muscles of the neck, and each of the facial features in great detail. There's also the
figure sculpting fundamentals course, which is a great place to start if you just want to learn
about sculpting people in general using traditional clay sculpting techniques. And there's also a hand
sculpting course if you, like many other artists, struggle with the hands. If you've watched up to
this point in the video, you're one of the few. Congratulations. You made it. I don't have
anything, I don't have anything to give you, but I appreciate it. What would you like to see me
sculpt next? All right, stay creative, stay productive, and hopefully I'll see you again soon
in another video.
