#dollartreediy#dollartree#diyhomedecor In today’s video, I’m sharing some beautiful DIYs using wood from Dollar Tree! These are all easy, budget-friendly ideas that give off that simple, rustic charm I love - perfect for adding a warm touch to your home. If you’re into Dollar Tree DIYs, home decor hacks, or just looking for creative ways to craft on a budget, hopefully this gives you some inspiration! Let me know in the comments which one was your favorite 💛
**Some links are affiliate links where I may earn a small commission at no additional cost to you. Thank you for your support! 🤗 ------------------------------------------------------------------ ❤️ Let’s Connect! I'd love to hear from you!
⭐ BUSINESS INQUIRIES ⭐ [email protected] ------------------------------------------------------------------ Dollar Tree DIYS Playlist • Dollar Tree DIYS ------------------------------------------------------------------ **Please take precaution when painting, sanding or staining, etc. Always make sure you're in a well ventilated area and follow manufacturer's instructions. I want you all to be safe. 🤗
In today's video, I'll be making some beautiful DIYs using wood from Dollar Tree, so let's
jump right in!
For the first DIY, I'll be making a little tabletop stand, and I'll be using this wood
shape.
It looks like a little house with a triangle top, and I'll be using two for this project.
Since I'll be painting these, I'm just sanding off that sticky residue from the label just
to make sure the paint goes on nice and smooth.
And I'm just using a couple warm neutral acrylic paints and thinning them down a bit with some
water.
So I'm just brushing that paint on and then wiping it down.
And since it's thinned out, you can still see some of that wood grain underneath, which
gives it a really nice stained effect.
I'm using Territorial Beige and Khaki from Apple Barrel, and mixing those two together
with a bit of water always gives me that perfect warm neutral shade.
Very neutral and earthy.
I'm keeping it simple here, but you can totally paint or stain these whatever color you like.
But let me know below, do you prefer stained wood or painted wood?
I guess I like both.
Once the paint is fully dry, you can use a heat tool or even a hairdryer to speed that
up.
I'll be adding some stenciling to add some character, and I'm using this beautiful Bird
and Branch stencil from Walmart.
I'll be gluing one of the wood shapes on top of the other to form a little L shape, like
a mini stand with a back, and I'll be stenciling the large bird and branch design onto the
vertical piece that'll stand upright.
So once I have that where I want it, I just tape it down, and I wanted the design to kind
of trail out from the edge for a more natural, flowy look.
I wanted a dark, almost black color for the stencil, so I'm using Graphite from Craftsmart,
and it gives a nice bold contrast without being too harsh.
So I'm just pouncing the paint over the stencil, and I always make sure to dab off any excess
paint first, and that just helps avoid bleeding and keeps the design nice and crisp.
And that came out beautifully!
For the horizontal piece on the bottom, I thought it would look really nice to have
some of the branch coming up from below, like they're growing from the base.
So I used a different part of the stencil to add that detail, just to give it a bit
more balance.
I could have totally left it just like that, and honestly, I think it already looks really
pretty, but I felt like the top could use just a little more, so I added a few extra
branches above the bird, just to fill it out a bit more.
You can definitely leave it as is if you like, it looks great either way.
To put it together, I just added a strip of glue along the straight edge of the piece
that's lying flat, and then I placed the other one right on top, standing up.
Super simple.
You can place some little candle holders right on top, or some small succulents.
You could also use it as a decorative bookend.
Definitely lots of cute ways to style it.
For the next DIY, I'll be using four of these corrugated metal frames from Dollar Tree.
I'll be gluing these together to form a cube.
To make sure everything lays flat when I glue them, I'm just removing a couple of the metal
tabs on the side.
Now I could have removed the little stand on the back too, but instead, I just added
a little hot glue to hold it down in place, and that works too.
Before I glue them all together, I just wanted to share a couple other ways you can glue
these frames together.
You can glue them side by side to make a long rectangular piece.
It already has metal clips on it, so you could totally use it to hang little notes, or recipes,
or even small printed photos.
Or another cute option is to glue two on top, and two on the bottom.
I like that too.
It'd be cute in an office, kitchen, or even by the entryway for reminders and to-dos.
Okay, so for this DIY, I'm going to glue the frames together to form a square.
I'm just applying hot glue to one side of a frame, and then attaching the end of another
frame to form an L-shape.
Then I do the same thing with the third frame to create a U-shape.
For the final one, I apply hot glue to the two outer edges and press it into the U-shaped
frames to close it all up into a cube.
To make the base for this, I'm using one of these wood planks from Dollar Tree that I
already had on hand, but you can totally use whatever scrap wood you've got, or skimp the
base altogether if you prefer.
It's totally up to you, and it still works out.
Once that's measured and trimmed, I just flip the frames over and glue it right in place.
And this one's all done.
You can place some faux flowers in the center, or drop in a base with some fresh flowers.
I also love these clips.
You can clip in some photos, your favorite verse, or even tuck in a small flower or two.
I really love how this one turned out.
For the next DIY, I'm using this thick square wood piece.
I just wanted to deepen the color a bit, so I'm mixing together that same warm neutral
combo from earlier and thinning it out with a little water so it goes on like a stain.
So I'm just brushing the paint on and wiping it down immediately.
Acrylic paint dries really fast, so I'm just making sure to wipe it down right away.
And I'm applying the paint on all sides, top and bottom.
A few videos back, I made some DIYs using these beautiful rub-on transfers I found on
Amazon, and I'll link that below.
And I had a bunch left over, and I thought they'd look so stunning on the wood.
So I really like this section with the flowers and the butterfly, and it has that beautiful
vintage look.
It's so pretty.
So I'm just trimming that section out, and I want to make sure it fits nicely on the
wood square.
To apply it, I just peel off the white backing paper and place the transfer onto the wood.
At this point, I can still move it around a bit to get it in the right spot before it
sticks.
It comes with a little wooden stick, so I start by rubbing over the whole design a few
times to help it stay in place.
Now I thought I should trim out that overhang before continuing because I didn't want any
of that transfer hanging off the edges or tearing as I peeled it back.
So I focused on one corner, rubbing firmly and slowly lifting the top plastic sheet as
I go.
If any part doesn't transfer, I just lay it back down and rub it again until it sticks
completely.
Then I just lightly tap over the whole design with my fingers, pressing it down gently to
make sure every little part is fully stuck to the wood and nothing is lifting or peeling
up.
There was a little piece of the transfer I trimmed off earlier and I decided to use it
to fill in a spot that looked a bit empty to help balance everything.
I'm adding some wooden beads to the bottom to give it a little lift and just hot gluing
one to each of the four corners underneath.
And finally, to seal and protect the transfer, I'm brushing on some Mod Podge over the top.
And that's it!
This one's all done and I love how it turned out.
For the next DIY, I'll be using this wooden tray from Dollar Tree and four of these wooden
planks also from Dollar Tree.
I'll be framing the sides of the tray using these wood planks.
This just makes the tray look a little bigger and deeper.
I'm measuring each one carefully so they fit neatly and cleanly along the edges and I'll
be trimming two for the longer sides and two for the shorter.
You can use a miter box and saw or even just score over it several times with a utility
knife.
To attach the planks, I'm applying wood glue along the edges of the tray and I started
with the two longer sides and then with it flipped over, I just attached the wood planks.
Before continuing with the shorter sides, I let the longer ones dry for a few minutes.
I used clamps to hold them in place, not until it was fully dry, but just enough so they
wouldn't shift while I added the other pieces.
With this wood glue from Dollar Tree, it does dry pretty quickly.
Next I apply wood glue along the shorter sides of the tray just like before and then I press
the remaining planks into place.
I'm making sure they line up with the corners so everything looks nice and even.
I'll be framing the outer ends with these wooden dowels.
Now these are from a prior project, but I usually like getting square dowels at my local
hardware store like Home Depot or Lowe's.
So here I'm just marking and measuring and then I trim them down.
Now we'll come back to the dowels in a bit, but with the tray, I'm just sanding the ends
a bit so everything lines up smoothly along the edges.
The fit was already really close so I didn't have to sand much, but I also gave the inner
and outer corners a light sanding.
I'll be staining it and more likely than not, there's probably going to be some dried glue
spots which won't take in the stain well.
I'm using a water based stain in the shade Special Walnut.
I love using water based stains because it's really easy to work with, it dries fast, and
it cleans up easily.
So I'm just applying the stain and then wiping down the excess with a cloth.
Now on the surface, unfortunately, there was a big section of that that didn't take in
the stain.
I wasn't expecting that and I didn't like how it looked so I decided to add some decorative
peel and stick wallpaper over it.
I had some left over from my previous video which was perfect and I really love this green
and gold leaf one.
I think it looks so stunning with the wood.
So I just cut out the amount that I needed and then I peeled off a section of the backing
paper and then I stuck it in place, starting at a corner and then I carefully removed the
rest of the backing paper.
And you know, I really loved how this turned out.
That whole dried glued and stain mishap actually worked out because I ended up using this pretty
well paper and it looks better than I originally planned.
Next I'm going to be painting the cut dowels black.
I wanted something that would add a little contrast and tie in nicely with a dark stain
so just using basic black paint for this.
Okay, so I decided to take it a step further and dry brush some green over the black.
I'm using the shade Moss from Waverly Chalk Paint and I really wanted it to have a rustic
chippy vibe like it's been worn over time.
So I just dip my brush lightly into the paint, dab off the excess and then lightly drag it
across the dowel.
They don't all have to look the same.
Some sides have a bit more green than others and I love the look of that.
To attach, I just apply some glue on the bottom of one side and then I place the tray over
one of the long dowels, centering it.
I did place another long one on the other side just to help prop it up and I just continue
gluing the rest of the dowels to make a rectangle and frame the ends.
And this one is all done.
Thank you so much for watching.
If you liked today's video, will you please give it a thumbs up?
And if you haven't already, subscribe and hit that notification bell so that you don't
miss any of my new upcoming videos.
Definitely let me know which one is your favorite and what you would like me to DIY next.
Until next time, bye!