Transforming a Japanese Black Pine Bonsai | Autumn Styling, Bud Selection & Rewiring Magic

Bonsai Artistry
5 followers
#bonsai #bonsaiart #bonsaitree #natureart #miniaturetrees #gardening #plantlovers #homedecor #relaxingart #beautifulbonsai #treeart #bonsaimaster #bonsaicollection
G'day YouTube, welcome back to my channel Bonsai Works, I'm David.
It's that time of year where it's autumn here in Melbourne and anywhere from autumn to pretty much
next spring I guess you can do this work on black pines. This is a Japanese black pine
that needs autumn work. So remember with my with my videos in the past I always say black pines
you work on them twice a year and this is one of those times. So you work on them in summer where
and in autumn where you bud select back to two buds and needle pluck the tree. You can also do
all your wiring now if the tree needs to be wired and restyled this is the time to do it. So the way
I attack this normally is I always give the tree a top down review in terms of a top down needle
in all the places. So needle pluck, hold needles and bud select back to two. Try and pick the two
smaller buds if possible if there's multiple buds. The two lateral buds are the best to choose from
choose as well so if you get two small lateral they're the best ones. Try and eliminate anything
really big if you can but we need to go back to two in all these places. So that's what I'm going
to do today on this Japanese black pine. It's been featured on my channel quite a bit it's coming on
really well. I really like it. Used to be a taller tree so I've dimmed that off. There's lots of things
changed in the future. It's a lovely grey tokenama pot. You can see how healthy and strong all the
needles are and the candles are. So now we go and bud select. I candle pruned the whole tree in summer.
So I pruned off all the candles and this is what happens by autumn. So let's go through the tree
now and I'll show you what I'm doing. So I'm going to work in this in the top first. Normally I cover
the basis of the tree but because the foliage is all past the tree when I needle pluck all the
needles are just going to fall onto the table not onto the pot in the pot. So if you if you've got
a taller tree cover the soil with a towel. So let's have a look firstly in this area. So I'm hoping
the camera will pick it up but I will. So I'll look for the new bud. There's a new bud in there.
There's a long bud in there. There's only two unfortunately in that spot so I have to keep two
but I'll needle pluck the old needles in this spot. So you can use, can use, what do you call them?
I forgot the way they're called. Anyway and but I use my fingers so that's why I probably
forgot what it's called. So needle plucked and you're left with this was two in one spot and one
on the other side. So there you go. So that's just needle plucking one-on-one very basic. Needle
pluck the old ones leave two buds. Now if there's sometimes too much too many needles on the one
on the one on the one bud you can also eliminate a few of those just to balance the growth.
So try and balance the needles evenly for both both buds. So you keep doing that. Keep going
through the tree. It's a bit hard to show you with the camera there but we'll see how we go. So
needle plucking also just helps expose the tree so you can see also. So it's important to really
open up that. Then I can see how many buds we got and we've got multiple in one spot and start to
anything like that. Again we're okay and you see we only got two in one spot which is good.
Good news. Two, two. That's what we want to try and achieve. So I didn't have to
actually no this is this has got three. So I'll try and show you this one. So in this case I've
got two small side lateral one and one really long down one. So I'm going to cut the down one off.
Okay so I'm left two lateral small ones. That's what I wanted. So now I'll check this one. This
is the one that's got two unfortunately. Just two. They're quite big so maybe next year they'll
get smaller and shorter. Needle plucking. So now so we just complete. I'll just complete this one
so you can see the difference. This is a bit of a better an example of I think this has got three
no it's got two as well. So usually that's pretty good. If you get we make a cut and you only get
two. Actually this has got it's got three. So we've got two side ones and one down one. In this
case I'm going to get rid of the down one. So get rid of the down one. So again so in this case I've
just cleaned up this little branch here. Needle plucked it. Cut back to two. Two buds. Needle
plucked a bit more. Now it's a bit more balanced and even and looking good. Okay so I'm going to
keep doing that throughout the whole tree. So in this case here we've got one two three again.
Two smaller ones. The one big one going up the middle. So we take that big one off.
Get the two small ones. So I'm just going to try and show you this one here when you come to
try and make a decision. So I've got this one big one here. Two small buds and that's the fourth
big one there. So in this case try and show you it again. Two big ones. Two small ones. Very obvious.
Take off the two big ones. Okay I mean if I get this right. I don't want to wreck the other two.
So the two big ones are gone. Leaving the two small ones. Okay very important. You don't want
the big ones. I'm going to try and avoid the big ones as much as you can. Skip the small ones.
Needle pluck. Obviously the old buds and there you go. Just clean those up in a minute. I forgot
it's tweezers. If you use tweezers. So if you've got old tweezers you can use tweezers and give
them if you really want to. But I find I use my hands much easier much quicker and better result.
Okay after a complete needle pluck and bud select back to two in every spot. You saw the
close-ups hopefully how I bud select. It's pretty easy. Pretty straightforward. You know you
gotta remember pick and choose. Sometimes you get a mixture of buds and you just got to play around
with it and figure out which one you want. Now I'm pretty much at the point where I've also removed
wire that was cutting in. So now I'm at this point. Now the tree needs to be you can see how it
needs to be fully rewired pretty much and restyled and repositioned. There's wire already on the tree
so that's good news. I can always tweak certain areas. But now it's back to the basics of styling.
So I always start from the bottom. Look my way up and hopefully we'll be able to get a good
result. So really it's just a matter of going back and looking at the branches. A lot of things have
moved up so if I've got wire on there I'll see if the wire is holding. If it's not then I have to
replace the wire and add additional bits of wire. So it's pretty much just so there's like extra
growth there. I've got to rewire some of that. So down to wiring exercise. Now the important part
with this tree is that it is in refinement stage. So when it's in refinement stage you really now
start applying, for me, a few different things. I now use, I've used it anyway, but I use copper wire
at this stage. You can pretty much hardly see the copper wire in this tree. You can't see, you hardly
see the wire. If I use aluminium it's quite heavy, thicker, you'll be able to see it. The fineness of
the copper enables you not to see the actual wire as much which is great. Especially when you
want to get the tree looking really good maybe in a show in a couple of years time in an exhibition.
I think this tree is maybe a year or two away from an exhibition hopefully. Nice size tree, it's a
smallish size, not huge and it's a good tree. So that's one thing I really, you know, really look at
is getting the wire really neat as well and using copper only. So that's what I plan to do. I'm just
going to work my way from this branch, the lower cascade branch, up, up, up and see if I have to
remove anything. So sometimes there's really long bits of growth. Maybe I can replace it with a
smaller one in closer in, things like that. I have to work out if things could be removed and so on.
So really now it's a very slow process of going through the whole tree and start to wire up and
position. I'll show you the progress as I go but it's more important to understand the actual steps
that I took. You know, needle, plug, butt, select, take a little wire off. Now you can go in, rewire, reposition
things like that to get it looking perfect and then it's ready for a nice over
overwintering I guess. Just sit back on the benches and let it winter and the candles
will start to actually become very visible. So there's a candle now in here that's developing.
That would then explode in summer, by summer, over spring. It probably could be even that big.
Then we cut that branch off and then we'll get two small buds come out from this point. So the two
small buds in autumn will be there. So we've got one, two. So that's how you develop the
2x2x2x2 ETL. So that's the process. Okay I'm going to get started wiring and get this tree looking good.
So the first lower branch has been wired. I'm trying to create a level in here, in the lower level around the tree.
Just tweaking it a little bit just to create that level. So just making sure you've got different levels
as you go. Try and clean underneath as much as possible. Have everything kind of proportional.
Not too jutting out. But yeah that's that's the first part of the tree. There's a little bit of
long growth in the back but I might leave it for now and hopefully get it filling in. But other than that
pretty good first step. Now we'll just keep wiring and progress up the tree. There we go.
I'm continually continuing to build the tree. Had to do some fancy work with this branch.
Now you can see how the nice clean line here. Wraps around over here now. With this part of the tree
it was actually too far forward. It was actually quite out. Now I brought it back in. Still needs to be
probably trimmed in the future. But I brought it back in using a guy wire in here to bring this
branch more to the back. So once you get more to the back you shorten the width at the front.
Okay so by bringing it back in now it's sitting perfectly and kind of in the hole that this branch
created. So this branch has got a bit of a hole in here. So now this branch is sitting perfectly
inside that hole. In that hole there. So that will build up over time and it should be looking good.
Now I've made room for the apex to come down into this area. So I'm going to work on the apex part
and see what we can build out. Probably a few layers. Finishing off maybe I think that might
be the top. But we'll work out where it's all going to fit. But firstly get these branches down
into now this space now. As you can see there's probably a bit too far wide again here.
But again we might be able to bend these back backwards. Sitting them in nicely in there
and should be able to finish off this tree looking quite good. Alright so I've actually
completed all the work on this tree. Quite a bit of wiring rewiring on this tree. Haven't done
anything with the deadwood yet because I only do that if I'm going to display the tree. Get that
all cleaned up. But in this case I have rewired pretty much everything. Cleaned up. Made sure I
made new pads everywhere. I've also compacted the tree because it was actually having branches out
here. Pushed it back in and moved everything around. Now I'll show you. So the apex is nice
to put in here and multiple layers. It just needs more time to develop this tree. Now I'll show you
side on. So you can see now how it looks in terms of the position of everything. It's pretty much a
nice nice flowing tree. The branches are all around but they've actually formed a nice almost like a
arrowhead the whole way through. So the apex is in here and everything fits in. Before some branches
were right out here. I had to push them all the way back in and now it fits more of a better silhouette.
So just to show you that quickly. I'll try and do a spin for you so you can see like
before and after. Oops doesn't go all the way. Get it coming back this way. Just clips the curtains.
And a pretty nice tree. So you can do all your pines at this time of year in Melbourne. It's
autumn so you get it all done and they're looking good. So I think this tree is maybe a couple years
away from the exhibition. So we're really looking forward to it. It's really coming along well.
And I'll just keep following the same process with this tree. Candle cut in summer which is
December and then needle pluck bud select in autumn. So that's around May for me. And you
get to keep building a nice tree by re-sitting all the wiring, re-sitting all the branches. Now I have
a much better structure. So it really is now final refinement stage of just candle cutting
bud selecting process. So there you go. There you go. I hope you enjoyed that video. Very simple
but very important technique. Spend a few hours on your pines. This one took me more than a few hours
but it's looking really good. All right guys thanks for watching. I'll see you next time.
