Plus check out all of my other favorite tools on my Amazon Storefront here 👉 📍https://www.amazon.com/shop/thepapery... (as an affiliate I earn from qualifying purchase made here)
And for more on using a quilling paper mold, check out this video 👉 How to Use a Quilling Mold: • How to Use a Quilling Mold | 3D Quilling |...
Music: Front Porch Blues by Chris Hagen --------------------------------------------------------------------------------------------------------------------------------- Hi there! I’m Meredith, art school grad and mama of two awesome and incredibly energetic littles. I fell across paper quilling by chance and fell in love with all the amazing things paper can do! Follow along as I roll tiny quilling creations and I promise I’ll teach you everything I know!
Hey folks, this is Meredith from the papery craftery and today we are making some striped flowers sort of
No name non-descript flowers, but we're adding stripes, which is just a fun technique to try
So i'm going to be using two different colors. I have a fuchsia nice bright pink. This one is from craft harbor
And then I also have some black they are both 1 8 inch wide, but you can use whatever width you like
As far as quilling tools go I am going to be using my savvy slotted tool from quilt creation
But I do have my needle tool here, but that is just for the handle that i'm going to show something later
And I have my usual elmer's glue all in my needle nose container
And also some tacky glue because i'm going to be molding these
petals to make 3d flowers
If you like if you're concerned about your glue showing sometimes it does on black paper
Go ahead and grab some clear glue and that will kind of ease your mind about little gluey bits later on
I do have also my workboard covered in parchment paper some tweezers small scissors and
Pins just that's just to hold down the paper
Like I mentioned a second ago as well. We're going to be molding these flowers
I've done this a lot, but I like to flip my mold over and use the inside
And i'll mention some alternatives to that later on when we get to that part
So first up we're going to grab our pink paper
You can do this with any length of paper you'd like you can do this with any color you like
I just kind of wanted to show the real bright contrast between the pink and the black for this project
So these strips happen to be 22 inches long
I really just want three pieces that are going to be the same size. So to make life a little bit easier. I'm just
tearing my strips in half
and
Two of the shapes are going to be the same and then one is going to be slightly different
I'm going to start off with the one strip that's going to be different on its own
and i'm using my
Slotted tool to roll that up. But like I said earlier, you can use a needle tool. You can use an automatic pulling tool
Whatever you like, but we're going to roll this
All the way to the end
Take it off the tool and let it open up naturally
This project actually came about after
I found a picture online of a really pretty
black and white quilled flower
And I just love the contrast of the two together. You don't see black a lot on flowers
So I figured I would kind of make my own spin
on the same idea but using different colors and I
completely changed around the shape of the flower, but
The vibe is the same
Adding black to make some stripes just makes a really graphic
Beautiful flower petal when you're done
So here I have my coil all glued and sealed
I'm going to give a large pinch on one side just to make your standard teardrop
But then I just want a small pinch on the other side sort of a long diamond shape
So we need one of those and then the other shape is going to be two of the same
I have the other half of this paper here
From the strip I tore earlier and just like before we're going to roll it all up all the way to the end
And take it off the tool let it open up
And seal it just the same as we did for that diamond shape, but you do want to
Kind of get the two coils to be about the same size
I've done enough of these that I can sort of eyeball it
But if it makes you feel more comfortable go ahead and make all the coils you need first
Just to make sure they're the same size and then start shaping them because if you're shaping them
Sometimes it's hard to see if they're going to be the right size
So you can do all your coils first and then start making your shapes
for this side, we're going to do a half moon, so just
a nice pinch in the middle and then
Two points on either side bending it around your finger
or
a tool I like
the size of this handle
On my needle tool so
Push both sides without pushing down the middle too hard and you'll get a nice half moon shape
Now we're going to need two of those
And one of that diamond shape and that's going to be for each petal
For this flower though, we're going to have five petals. So all together you're going to need five of the diamonds and ten of the half moon
this one's
Got a little bit
opened up
One half moon if you will
So you can readjust those if need be they should stay for the most part
There we go
So that's enough for one petal
And you can go ahead and make all your other pieces
And then we're going to start adding in the stripes
And adding stripes is really as simple as
Wrapping the pieces that we just made with a little bit of black and then a little bit of pink
So to do that we're going to start with the diamond piece
Add a small line of glue down one side. I find it easiest to do one side at a time
And then you're going to lay your black stripe
across
on the glue
Just get it molded down there. So it's
adhering completely
Just like that. That's what you should have at this point
And then we're going to add a little bit of glue to the other side
You really don't need a lot here. So those needle nose blue bottles are very very handy
Wrap it around the other side
and
Make sure that's secure
And i'm just going to do it again. I think for my taste I thought two
wrappings
Ended up being perfect one was a little bit too subtle
Any more than that, you know, it's up to you
But you'll see at the end what two looks like
And it worked for me
So after I get the second
Side of the second wrap kind of measured I snip that off and then I glue that
To make sure that I don't accidentally take it off while I am
Snipping it
So that is the black stripe and then i'm going to add pink in the same way
If you want to you can always change this up, you know, obviously don't use black you could use any colors you want
Don't use the pink you could use
whatever colors you want, but it also might be cool to
To wrap it in a different color altogether. Maybe a darker version or a lighter shade of that same
Color you started with
That might look really cool if it's sort of an ombre look
You have a lot of options for this technique
And it's just a nice way to add some extra detail to your flowers
Here we go with the second wrapping
of the pink
And
There we go
Snip that end off this time I did glue it first
It's all good
So if you don't manipulate your shape too much while you're wrapping it it should all stay the way you want it
And there you go
There's the diamond and you're going to do the same thing
With those half moon shapes as well every piece that we made already
For those five petals you're going to want to wrap two times with the black and then two times with the pink
So that's all done. Now. We can go ahead and start putting our petals together
We're going to be making five of these exactly the same way starting with our center which is that long diamond shape
the
Peak that is more shallow the smaller part of the diamond is going to be facing the bottom
And I put a little bit of glue down most of not all but most of that diamond shape
And then I just laid one of my half moons right on top and just sort of molded it into place with my fingers
The arc that I made
on my
Needle tool when I molded it around that handle did make it a little bit too deep
But I still liked the curve of it. So I kept doing it
If you do this with your fingers, you might not have to mold it as much it might fit a little bit
Whoops a little bit more nicely
But what we're looking for is those two half moons just sort of molded around that diamond shape
and the point of the diamond will be
Longer on one end. That's what you're looking for. You want them all to line up on the
More shallow end of the diamond and then it to come out a little bit on top
You also want to make sure that you really pinch the heck out of those bottoms
If you don't you might have a hard time having all five of these
In the flower shape. So if you find that you only have four of the petals
Fitting together in this next step go ahead and pinch them a little bit more
And you'll be able to fit that fifth one in
Now I just showed that we're going to be using the tacky glue for this part because we are going to be molding these flowers
And tacky glue is really great because it will hold the petals together
While giving us a little bit more time and some more flexibility to get this into a sort of a 3d
Flower shape you don't have to do this part. That is the molding part if you want your flower to just be sort of flat
That is totally fine and definitely useful for a lot of projects
But if you're looking for more of that natural looking flower 3d shape
You might want to follow along to this part here
So i'm just adding a little bit of that tacky glue
to the bottom of each of the flower petals
And then fitting them together into that star shape
You can also use a toothpick for this method
Or something to get a little bit less glue
That will also work. This is a little heavy on the tacky glue side, but I decided to go straight from the bottle
Just to show what it could look like you can also brush a little bit of extra glue away
or i'm going to go in with my
Needle tool here and just get rid of
A little bit that's coming up here
Okay, so note it does still have a little bit of a hole in the center that is totally okay and expected
We will cover that up later
Now you're going to let this set for just a few minutes
You do not want it to dry all the way or else you'll have an impossible time molding it
I'm going to remove this light pink one here. That's when I already had molding
And gently remove it on my board. It's going to stay together, but it hasn't completely set yet. There's still a little bit of time
For this to be able to get a new shape
And like I mentioned at the beginning of the video
I'm using the upside down part of my filling mold for this. I find it really just makes nice little cupped flowers
It won't stand up by itself. So I kind of have to
Get this pin box on the other side here just to make it level
I put it right on top of one of the domes and then i'm just going to use something just weigh it down
If I have time
Sometimes I just use my hands
But for now, i'm just using the end of my glue bottle
And it's just enough
To make it have a slight cup a little bit of a 3d shape
You don't have to do that part. You can also use a lid of a jar or
A small glass bowl anything that's not going to stick if some of the glue happens to get on there
And you'll be able to remove your flower
But still has a little bit of that kind of mold shape to it
You can use anything you have around the house. It'll all work the same
At this point we are making the
Center of our flower while our flower sets up in the mold
And all it is is I have six inches of the black and then I glued three inches of the pink
And then another three inches of that same black
end to end
I'm going to roll it on up into a tight little dome
And it's going to kind of be the inverse of what we were doing on the petals
So instead of being mostly pink and a little bit of black
This is mostly black with a little bit of a pink contrast stripe in the center
very simple shape
Rolled it all the way through it didn't let it open up on the tool. I'm not going to let it open up in my hands
Just add a touch of glue to the end
And get that to set I did decide to dome this just a tiny bit
Just by pushing in one side if you want to leave it flat that's totally up to you
There you go. You can use a tool for this if you want to
That will make it maybe a little bit more even than what I just did. But for the sake of time
and ease
I'm just going to add a little bit of glue to the underside
And then it's just a matter of flopping it down on your flower
You can add a little bit of tacky glue or elmer's glue to the bottom to make it stick
Now at this point everything is dry and you can see it's got a nice little curve to it
Just like a flower opening up on a vine
And I have some other colors here
definitely in my pink era with the light pink and a little bit of this kind of
It's another sort of a variation of fuchsia, I suppose
But you can see you can
tell the black lines
Quite a bit more than they were when they were in pieces the overall
Look together is a lot more graphic a lot more modern
It almost looks like to me sort of like a comic book style got those really strong black lines and nice bright pop of color
It's really pretty technique that you can use your imagination. Let it run wild be creative. This is just a starting point
But as always if you have any questions about these flowers leave them in the comments i'll get back to you as soon as I can
I will leave links to everything you need in the description box for this video
There'll also be a link there to my buy me a coffee page
Where you can find some culling extras and leave me a little bit of extra support if you wish to that's always greatly appreciated
In the meantime, don't forget to like and subscribe you can be around for the next video and i'll see you then
Thanks so much for watching
Bye