Ultimate Java fern care guide: It's so EASY to grow!

Aquaspace & Terrarium Designs
32 followers
Java fern is a timeless classic. It can be found in pretty much every planted aquarium out there. I use it in all of the aquariums I set up for myself, and for my clients. 🌿
Follow along as I cover all the essentials you need to know, in order to grow an epic Java fern.
Chapters 📖
00:00 - A classic plant
01:26 - Appearance and varieties
03:10 - Origin
03:31 - Care
05:56 - Trimming
08:25 - Common issues
Thanks for stopping by, drop a line if you enjoyed today's video or if you have any questions! 💬
#aquarium #aquaspace #handicraft #diy #plantedaquarium
You in the market for a hardy aquarium plant? Look no further. Javafern is just about as hardy as
they come. In today's video, I'm going to cover what you need to do in order to grow it, trim it,
and propagate it. Talking about Javafern today, the hardiest plant out there. It is pretty much
bulletproof. So when I say hardy, what do I mean? Well, it can survive a wide range of conditions
in the aquarium. It can also survive a wide range of conditions outside the aquarium. I've had this
bucket of narrow leaf Javafern sitting in my garage. It's not even full of water. There's
a little bit at the bottom keeping it humid in there and it's doing just fine. Most aquarium
plants can live in a bucket for like one to two weeks. This stuff has been in there for June,
July, August, September, October. It's now November. So five months. Javafern is also
extremely resilient when it comes to resisting herbivores. It's one of very few plants that
work well in African cichlid or silver dollar tanks. It's truly a timeless classic. One of the
most popular aquarium plants that's been around since the dawn of aquarium times. Some characteristic
features of Javafern are really thick leathery leaves, which is part of the reason that fish
won't eat it. Apparently it also tastes bad. One of my favorite things about Javafern is the strong
venation. They show up as two lines of cells that run up and down the leaves. And in a healthy fern,
the cells will look like they've kind of been stamped and waxed, like almost popping out of
the leaf. Even though there are many different types, Javafern is actually just one species,
Microsorum pteropus. There are varieties that have really large leaves, small ones,
single stranded leaves, ruffled leaves, trident shapes. Just to name a few of the varieties
are Javafern windelove, Philippine miniature, narrow leaf, miniature narrow leaf, trident,
sunset, and needle leaf. Javafern grows off a rooty stem known as a rhizome. For the most part,
when you first buy one, it'll look like it's kind of growing horizontally off the rhizome.
Eventually the rhizomes will crisscross, growing in every direction, and the fern bushes up,
growing into a round shape. Smaller varieties have leaves about the size of a finger maybe at the
most, but most are much larger and can easily outgrow any tank without being pruned. Coming
out of the rhizomes, you'll also notice that there are lots of fibrous roots. You can trim some of
these if you don't like the way or where they're growing, but you'll want to leave a lot of them
intact for healthy nutrient uptake. Javafern can obviously be found in Java, but it also grows in
the wild across Malaysia, Thailand, and in some parts of tropical China. It can oftentimes be
found growing alongside creeks where it's either fully submerged or fully emerged from water
depending on the season. This is the most forgiving plant that you can put in your aquarium.
It tolerates such an incredibly wide range of parameters, and it doesn't need much light or
nutrition. That being said, you can stick it in a high-tech tank and get insanely dense growth.
Javafern is known for its slow growth, but as plants become established in aquariums,
they tend to grow faster and faster, with large plants growing almost exponentially.
In terms of specific parameters, Javafern does best in a pH of 5 to 8, GH of 0 to 30,
KH of 0 to 15, flow from low to high. If it's really low, you'll want to brush it off every now
and then to prevent debris from settling and growing into algae. CO2 is not required,
lighting from extremely low to pretty high, temp from 65 to 83 Fahrenheit or 18 to 28 Celsius.
This is probably one of the widest ranges of parameters that you'll see for any species.
That's one of the reasons that it's so popular. It's great for a typical planted tank,
or for a high pH African cichlid tank, and maybe even on occasion be found in brackish tanks.
So at that point, you're probably getting into a range where you're not getting great growth and
the fern's not looking so vibrant. When it comes time to place a new Javafern in your tank,
you'll want to make sure that the rhizomes are not in the substrate, whether that's soil, sand,
or gravel. I mentioned that briefly already, but rhizomes need to have access to the water column
for nutrient uptake and gas exchange. It's perfectly fine to rest them on the surface
of the aquarium. Maybe use like a little weight, like a small rock over the rhizome.
Eventually roots will set into the soil, holding the plant in place. You can also attach it to
sticks, branches, or rocks by just wedging them into place, or by using super glue or sewing
thread. Just go easy on the super glue if you go that route. Too much can suffocate the rhizome.
Trimming Javaferns isn't absolutely essential for maintaining a healthy plant like it is with
stem plants or carpeting plants, but that being said, there are some helpful tips to maintaining
a Javafern bush. First thing, super important, if you do decide to cut it, you don't want to
hack back at it like you would the same way a stem plant or a carpeting plant. You can't just
trimming everything back to the desired length. You need to trim individual leaves. Think about
each leaf as being all or nothing. Cutting a leaf in half will cause it to start forming holes
and discolorations. If your goal is to keep the plant small, the best way is to be constantly
trimming leaves off the rhizome as soon as they hit a certain size. In a healthy plant,
you'll get enough leaf turnover that this will be sustainable. Take this for example,
even though it's an African water fern, not a Java, it's pretty similar and I've used that
trimming method on it. If I let this plant grow to its full potential, it would completely take
over this whole area, this side of the tank. Each leaf would extend out to here, but because it's
in a dark corner and I'm able to stay on top of trimming, I've been able to keep it at kind of a
stunted growth. In other parts of the tank where they are getting tons of light and growing like
crazy, I use another method. I wait for them to get insanely large and then I rip them in half.
You can pull a bundle like this out and rip it along the rhizome, usually multiple rhizomes
when you're talking this size of a Java fern. Then I'll have two plants, one I'll put back in
the tank in the same spot and the other I'll rip up into smaller chunks and dibby them out to
different tanks. It's fairly common for the oldest leaves on a plant to essentially grow old and die.
At this point they'll appear full of holes, turn brown, and look kind of shriveled. They will
however not fall off the plant. It's best to take some scissors and cut it at the base of the leaf,
essentially cutting the dead weight. If your plant's healthy, bright green, and growing lots of new
leaves, then this is nothing to worry about. If most of the plant is looking like that, then you
might have an issue. Common issues in Java fern. Even though this plant is super hardy, there are
a couple issues that can pop up. Translucent leaves, holes in leaves, and large-scale browning of the
plant. These aren't good signs and can be caused by two main issues. Translucency is more closely
related to intense lighting. That's easily resolved by lowering your light or moving the
Java fern to a shaded area. I do think it's worth mentioning that even though it's generally accepted
in the aquarium industry that high lighting can be bad for Java ferns, I've kept them under some
pretty intense lights on many occasions. I think part of the equation is the use of routine
fertilizers and CO2 in combination with strong lighting. If Java ferns don't have the fuel to
grow under strong lights, that's when they tend to fry. Browning and steady appearance of holes is
caused by low nutrition. You can go online and find charts that specify how particular nutrient
deficiencies manifest in plants and then go buy those particular nutrients. Rather than playing
scientific investigator, I'd recommend that you just get a nice all-in-one fertilizer. There are
many terrific brands to pick from. If you have a heavy fish load, then you can go with some
micronutrients. If you have a light fish load, go with some heavier ferts like Nylok-G, APT-3, or
Easy Green. You'd have to have a really low nutrient load in your tank to experience a major
decline of your Java fern. Regardless, adding some ferts to the water column will really help boost
the Java fern's growth. It'll also benefit other plants that you have in there, so it's definitely
worth considering. I think it'll be a benefit all around for your tank. All the video footage of the
Java fern in this video has at least periodic fertilizing. One last issue with Java fern is
algae growth. As with all slow growing plants with large leaves, algae growth can happen. There are
generally two solutions to algae growth on Java fern. First, increase the flow. Stagnant water
allows for sedimentation along leaves which inevitably results in algae. Second, work on
giving the plants more nutrients or better light. Unhealthy plants aren't able to fend off algae in
the way healthy plants are. I've seen tanks with tons of algae on the hardscape, but none on the
Java ferns because they're really healthy. Java fern is really easy to propagate. There's a few
different ways that this can happen. I've already touched on the first way. That's to rip off a
chunk of the rhizome. It can be as big or small as you want, as long as there are a few leaves coming
out of it. Eventually that clipping will grow to the same size as the mother plant. If you see roots
forming on the tip of leaves, chances are that's a baby plant budding off of the mother plant.
The roots that you see are coming off the baby plant's rhizomes. They are really easy to pull
off and place elsewhere to grow. The last way to propagate Java fern is completely up to the plant
by release of spores that develop into new plants. The underside of leaves might have rows of little
brown bumps, sporangia, just like the tracker pads from old laptops. If you know, you know what I'm
saying. Sporangia release spores which grow into plants over long periods of time. I've had this
happen on a couple of occasions, but I really wouldn't count on it for reliable Java fern
cultivation. Java fern is such an incredible plant. I absolutely love it. I use it in so many of the
tanks that I set up for myself and for my clients. I hope you enjoyed the video and learned something
from it. If you did, please consider supporting my channel with a quick sub, like, or comment.
Put a lot of time and energy into my channel and clearly you enjoyed it if you made it this far in
the video. Thanks so much. I really sincerely appreciate it. Until next time, see ya!
