Art Deco Furniture Challenge | Part 2 – Final Restoration & Winner Reveal Welcome back to Part 2 of my Art Deco Furniture Challenge! 🎨✨ In this episode, I’ll finish restoring my sister’s vintage buffet, tackling everything from veneer repairs to toning the trim. Stick around until the end to see the final transformation and find out who wins the challenge!
Welcome to part two of my Art Deco Furniture Challenge.
Last week, I prepped the piece that I'm working on
for the challenge, the buffet for my sister.
So today I'm gonna finish that,
and then at the end of the video,
I'm gonna show you all the before and afters
of the challenge participants and announce the winner.
So let me catch you up.
So here's the piece I'm doing for the challenge.
It is a buffet that belongs to my sister and brother-in-law.
So you can see it has some issues on the top there.
I had a stain, I was a little concerned about that.
So I'm just gonna start stripping it.
I'm using Smart Strip Advance by Dumond.
It's a non-toxic stripper.
Just going to apply it, let it do its thing.
And then I use a carbide scraper along with some acetone
and some 2-aught steel wool just to get that finish off.
You can see that thankfully that stain
was just in the finish.
So by stripping it, I got that stain out,
which was really exciting.
Then I went through the sanding process.
I like to always start at 80 grit for any remaining finish.
Then I move up to 120, and then I finish out at 180,
depending on what finish I'm gonna use.
You can see this part was always the tedious one.
I'm using my sanding contours.
I'm getting in all of those little nooks and crannies
and crevices and really getting a good sand.
Then I had several areas that I had to do
some veneer repair on.
I'm showing one here.
If you wanna watch the first video,
I go through details of all of my veneer repair.
But you can see this was the big one on the top
that I had to just really go through.
I filled it, then I'm using blend-all sticks
to just kind of blend it into the surrounding wood.
Like I said, the details are the hardest,
but you really have to get into those areas
so that you get a really fine finish.
After I go through all of that sanding,
then I'm going to clean it with a 50-50 mixture
of denatured alcohol and water.
I have sanded the top all the way down.
It's looking really good.
The only problem is I had one area
that looks like veneer is really thin right there.
So it's not, you know, I'm gonna have to fill that in.
That was already existing.
The stain is pretty good.
I have a little bit of give in the veneer over here,
I noticed.
See, there's a little bit of give right there.
It's tiny, but I'm gonna glue that down.
Now, what I'm running into is that I've got different woods.
If you'll notice here, if I spray this on,
see how mottled that is?
This wood is just not as pretty.
So this is beautiful.
This is all different.
This is different.
It's different than the doors.
Let me show you what the doors look like.
This is the doors.
It's beautiful.
That's obviously gonna be very dark,
but it's still pretty too.
Oops, dropping everything.
But you see how I've just got different woods going on.
So I have a call into my sister
because if I just oil,
she really wanted to just oil the whole thing,
but I don't think that's gonna work.
I had already talked to her
about what she wanted to do on the finish.
And we talked about maybe painting sections of it,
maybe doing some additional things,
but she decided, her husband decided,
they don't wanna do anything.
They don't wanna paint it.
They just want to keep it natural.
So I have a text into her
because this is not gonna look good just oiled.
So I was at Woodcraft yesterday
and I picked up my Osmo.
This is the hard wax oil that I love to use.
And I've been wanting to try this wood wax finish.
This is in the color cognac.
And so I happened to pick it up
just to use on a different project,
but I think it might actually work on this project
because what this is, is basically colored hard wax.
And so you can use it full strength
or you can use it very thinly
and use it as a stain as well.
And then you seal with this over it.
So I think it'd be a really good solution
for those side pieces that just aren't as pretty
as the other veneer.
So we'll see what she says,
but I'm trying to get it all finished sanding today
and then maybe take it inside
because we have a cold snow storm coming.
And so for Oklahoma, maybe four inches,
which is a lot for us.
But it's supposed to be super cold.
So I'm going to need to take it inside,
but this is low VOC so I could do this inside.
So I've got some decisions to make,
trying to hurry up and finish my final sanding.
And then we'll see what she says.
Okay, this is where we left off on part one.
I brought it inside and now I'm going to work on the finish.
I'm going to do one final sand.
I'm going to use 220 grit.
So you can either go up to 180 or 220.
So I decided I'm going to go try the 220 this time,
taping it off.
I'm using Osmo's hard wax oil.
This is clear.
So you can apply it several different ways.
And so it just depends on what applicator you use
with how durable your finish is.
So if you use a brush or a roller,
it's going to apply more product
and then it's going to soak down into the wood
and it's going to really create a really durable finish.
So I've learned this over time of using it.
So Osmo, you can check out their videos
on like Instagram or YouTube
and they explain how to use their product.
They have rollers, but I haven't been able
to locate them yet.
I did reach out to them and they gave me a website
for the United States that I can order some.
So I need to put an order in
because honestly, these rollers that I found,
they're really thin.
They're four millimeters, a very tight nap,
but honestly, they kind of started falling apart
while I was using them.
Cause I think the oil, it just soaked into it
and I started to lose a lot of the fibers.
And so I would not recommend them.
I'm going to try to locate the Osmo rollers
because I think that would be the best to use.
So I'm going to apply it
and I'm just going to let it set overnight.
This is the first time I've done it like this,
but I'm going to put it on thinly, you know,
not real heavy, not glopping it,
but I'm just going to, because it's a fine nap roller,
I'm going to roll it on,
make sure there's no drips or a lot of excess
and I'm going to leave it overnight and let it dry.
Now for the trim pieces,
I'm going to try the cognac and see if I like that.
This is a wood wax finish.
So it's kind of like a stain and the wax in one.
So it's supposed to be easier because it's just all in one.
I'm using some of the cognac over that repair that I had
just to kind of help blend it in to the surrounding wood.
I soaked the hardware in some boiled water and vinegar
and let it soak for just a little bit.
And then I cleaned it up with some barkeeper's friend
and a very fine steel wool,
but you could tell it didn't really clean up very well.
That's not brass.
I think it's like a tin of some kind.
So they needed some assistance.
And so I decided I'm going to apply gold gilding wax to it
and just to see if it kind of will brighten up that metal.
But then they had those middle pieces
that are like plastic and they had really,
in the cleaning process, they had really dulled down.
So I decided I had some silver gilding wax
and I thought let's create some contrast
and I'm going to put silver in the middle
and see what that looks like.
The next day I came back and did a very light sand
with a very fine grit, dusted it off,
and I'm ready to do my second coat.
This time, since it's already penetrated,
I'm going to go ahead and wipe it on
with like a white non-abrasive pad.
And then I'll come back with some blue shop towels
and I will wipe up the excess
about after maybe 15, 20 minutes.
You can see in the sun here
that there's just a little patchy after the first coat.
So that's normal.
First coat's a little rougher.
The magic happens on the second coat.
I think it's just too brown.
Especially now that the sun is out today,
I'm kind of seeing it a little bit differently.
I mean, the top looks like it's working.
I only have about one area that I'm going to have to
figure out what to do with and the back is...
I mean, it's so rich and then that's so...
I wasn't crazy about the cognac on this particular wood.
So I'm going to try some brown mahogany.
I need to kind of get it with some depth and some warmth.
But when I used it, I thought it was too dark.
So I'm going to wipe that off.
And then I thought, okay, well, I'll try nutmeg
because it's the lightest one that I have.
And it has a little bit of orange to it.
And I think it will blend better with the other wood.
So I'm going to try that.
You can see in this shot that the nutmeg
really provided a lot more depth and richness.
I love gel stains.
And I think mainly just because they just provide
so much richness, I think, to a piece.
And so I'm really loving this.
Here's the second coat of oil.
And I felt like the edges were too brown.
So I put a coat of nutmeg on those.
And so they'll get shinier
once I actually put a top coat on them,
but it's looking really good.
Here's the second coat on the doors.
It's looking really good.
You can see that nice shine.
Do have a couple areas
I'm still going to do some color correction on.
And then I'll do one more coat of oil.
But they're coming.
I'm going to use some acrylic paints
to work on blending in some of my repairs.
So you remember I did the blend all sticks,
then I sealed it.
Now I'm just going to use these acrylic paints
just to kind of go over and blend everything in.
So I'm just basically in-grain painting.
Then I'll seal it after it dries.
Okay.
For the inside and for the backside of the doors,
I'm just going to refresh the finish
with a little bit of Danish oil.
So they're in really good shape overall,
but Danish oil, it's a really nice finish
that just kind of goes in and fills in any imperfections
and just kind of revives that wood.
Now for the one drawer, it had that felt lining on it.
So I'll use my steamer just to release that felt.
And then I'll use that to also kind of get up
some of the gunk that's underneath there.
I'm not sure what happened to the drawer.
Almost like it was burnt
because there's like this really dark stain on it.
And it almost, like I said,
it almost looks like it's been on set on fire or something.
So I'm doing the best that I can.
I will go ahead and line the drawer
because it's not going to look great,
but I'm just going to clean it the best I can.
Then I'll give it a really good sand
and then I'll come back and line it.
Once I had everything together,
I just had one door that kind of dragged a little bit.
So I kind of adjusted the hinges, that wasn't doing it.
So I'm just going to go ahead and sand the top smooth
until I have really good clearance.
And then once I have it cleared and it's shutting freely,
then I'll go ahead and seal the top again.
So let's look back at the before.
This little piece has come a long way,
had some great lines.
Obviously it had some veneer damage,
lots of stains on the top.
That one that I was so concerned
that I wasn't going to be able to get out,
but man, it was really pretty straightforward.
You know, sometimes there's always something that goes awry,
but honestly after it stripped really well
and gave me a gorgeous finish underneath.
So it looked a little rough,
but honestly it was in a lot better shape
than you would think for a piece this age.
So after all of that, full strip
and kind of going back and forth on the frame,
here is the finished product.
What do you think?
I think it turned out really good.
I love the tone.
You know, we had so much problem with the top,
but look at the beauty of that top.
All those stains came out.
I was able to kind of color match some of the areas
where I had some veneer issues,
but man, you know, all those varying tones.
My sister texted me at one point and said,
do you think, you know, since we're not going to paint it,
it's going to be enough of a transformation for YouTube?
And I was like, it's okay.
I'm not refinishing it for YouTube.
I'm refinishing it for you.
So tell her in the comments if you like it,
because I think it turned out really good.
I do like the gel stain on the frame
because that wood just wasn't very pretty.
So the nutmeg, I think blends really well.
There's a lot of wood tones going on in this piece,
but that's pretty indicative of this era and this style.
I do like the hardware.
I think it turned out really good just refreshing it.
I think the Osmo really made this piece come to life.
That hard wax oil is just such a great product.
Can you see that shine that it gives?
It's a very durable finish and man, I love it.
It is such a great product.
Enjoy some of these videos
and I'll come back in just a few minutes.
Now that we're done with my piece,
let's move on to the challenge portion.
I first want to thank my three sponsors,
Wagner, Dumond, and Zebra.
Wagner, who makes my paint sprayer,
is gifting $200 to the first place winner,
t-shirts and stickers to first, second,
and third place winners.
Dumond, who makes the Smart Strip that I love,
is donating a price package worth $150
to the first place winner.
And Zebra, who makes project-specific paintbrushes
whether you're a DIYer, a muralist, an artist,
a furniture refinisher,
they've got a paintbrush for what you need.
They're donating a furniture kit to the first place winner.
So I want to thank them
for supporting the refinishing community.
Without further ado,
let's look at all the before and afters.
I asked three of my former challenge participants
to help judge and narrow down to the top three.
Barbara from Second Indulgence,
Kendall from Kendall Flips,
and Darlene from Agleam Designs.
They chose for the top three,
Sammie Down Designs,
A Better Day,
Once I had my top three,
then I created a poll on my YouTube posts tab,
and I had everybody come there and vote for their favorite.
The poll was open from Monday to Wednesday,
and the results were,
in third place goes to Siren Refinishing
with her vanity dressing table
that she converted into two nightstands.
Second place went to A Better Story
with that beautiful buffet.
And our first place winner was
Sammie Down Designs
with her gorgeous Art Deco armoire.
Sophia sent me some footage
of how she created her design on her armoire.
So she taped everything off.
The darkest color was Dark Walnut by Verathane
in the gel stain.
And then she went for a little bit lighter tone,
and that one was Antique Walnut by General Finishes.
And then her lightest one was Nutmeg by General Finishes.
So I really like the way that she kind of did
like an ombre effect.
And then of course she used the design
that was very Art Deco.
So beautiful, just a beautiful piece.
I know she did a lot more than just the design,
but very creative use of that tape design.
And it's just stunning.
And not only did she do the outside,
but then you could see on the inside, she also lined it.
I saw when she did her hardware,
it cleaned up so beautifully.
But congratulations to Sophia for winning first place.
If you've made it this far, you deserve a prize.
Thank you so much for supporting the refinishing community.
This challenge has been so much fun.
Thank you to all of my participants.
I've really enjoyed getting to know all of you
in the group chat.
And you know, that's one of the main reasons
I do these challenges,
for the community building aspect of them.
So it's my favorite part.
I love it.
My next challenge will be in June.
So if you like this, consider subscribing
and leave a comment below on which one was your favorite.
Thanks for watching.