Some of the links above are affiliate links, however, all opinions are my own. I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Hey there, I'm Yami, your Latina next door. Welcome back to mi casa.
Today we're going to be doing several neutral DIYs that are going to be perfect for this
winter season to keep things nice and bright in your home. Previously, I had gotten these
posts off Facebook Marketplace for only $10. And while not all of these DIYs in this video are
going to be this extensive, I do like to share these because these are just a way of using
something that you might not think in a different way. Now I'm going to be using the top portion of
these posts, and I'm only going to be using one for this. And what I had my husband do is I had
him cut off this top piece and then split it down the middle in order to create two pieces out of
one end. We also used some wood from some previous projects, and I had him cut them down to size.
Next, I applied some wood glue down in order to adhere both pieces of wood together,
and then I clamped them down in order to hold it together while the pieces dried. Once those
two pieces were dry, I got some more wood glue and then I applied the two previous pieces that
we cut from the actual post and adhered them onto the wood. And then I also clamped them down in
order to make sure that it would stay nice and secure while it dried. I even used a little bit
of wood filler in order to close in any gaps so that it looked like one piece. Once that was nice
and dry, then I cleaned everything off and prepared it for paint. Next, I began to paint
the entire piece, both the post and the wood pieces. And I'm using a very light beige color
here. Once that was dry, I added some clear wax in order to seal the entire piece. Next, I added
some white decrepit dust all the way throughout it, as well as a little bit of white wax in order
to give it an extra dimension and fill in all those nooks and crevices with a little bit more
white so that the details can pop out a little bit more. Here you can see the difference between
one that has the white wax and the decrepit dust versus the other one that just has the clear wax.
It almost gives it a nice stone effect. And that's basically it. Just do the other one and
you have two beautiful neutral bookends for your bookshelves. The next DIY is going to be super
simple and something you can do very easily with things that you probably already have on hand.
But if you don't, all you need are some plastic rings that you can get from your local Dollar Tree.
They're very inexpensive. You get six for one dollar, as well as this little bunch of raffia
that you can also get at Dollar Tree or you can get it at any craft supply store. You're going to
want to anchor the pieces down, probably with something a little bit stronger than this little
candle holder, and then you're going to create a braid. Now, as you can see here, I decided to paint
the exterior portion of the napkin ring a light beige color, and that's just in case if you do
wrap around the raffia, as you see that I'm going to be doing here, and you happen to get a little
bit of a peek through of that napkin ring, you don't see that shiny silver through it. You see
something a little bit more plain. And what I did there is I had a little knot to hold the pieces
together, but once I went back around, I took it off and then I began to hot glue the pieces all
the way around, and I just kept wrapping it over it, keeping it as tightly as possible to the
previous ring. That way, again, you'd see as little as possible of the surface underneath, and that is
all you do for this. Now, for something similar at World Market, you would be paying $18 for a set
of six, but here, because we're using inexpensive items and basically getting the same look,
you're only going to be paying less than three dollars for a pack of six. Now, once you get to
the end, you want to make sure you wrap the end piece on the inside of the napkin ring, and then
glue it down, hold it down so that it stays in place, but putting it on the inside ensures that
you have a nice clean finish on the very end, and you don't see any end pieces sticking out,
and that's basically all you do. Now you have a perfectly brand new raffia napkin ring for
your dinnerware.
Now, I was inspired to recreate this round wood mirror from Pier One's website.
Now, I'm making this one rather large, but the concept can still be applied to something
much smaller, and all you're going to need is a wood round, a round mirror, and of course,
some half beads. Now, here's a screenshot of everything that I used on this mirror. I poured
the wax out, and then I began to mix the other three colors in order to get the right tone.
I was trying to get some of that yellow away from the wood, and so I started adding this in
different layers. Once I was happy with the color, I added it into the wax, and then I began brushing
it all over the wood round, of course, removing it where I thought necessary, and then adjusting
the color tone to get the exact color I was looking for. I applied the tinted wax in sections,
just adding more as I thought it needed it until I got the right wood tone. Of course, in order to
prevent blotchiness, I did make sure that I was going along with the wood grain so that you didn't
see any ugly sections just kind of jumping out at you. Everything was nice and smooth and consistent
this way. I made sure to do the same to the outer edge of the mirror, and then I moved on to the
beads, and I did the exact same thing to them. Once everything was dry, I placed the mirror on top of
the wood round, and I measured around just to make sure that I was placing it directly in the center.
I traced the mirror all the way around very lightly with a pencil, and then using E6000, I adhered
the mirror onto the center of the wood round. I left it alone to completely dry before I placed
the beads on it. I used E6000 in order to add the beads one by one all the way around the perimeter
of the mirror, and with my little helper, I was able to do it in no time. Then, because I wanted a more
whitewash look, I added some paint to the clear wax like I did earlier with the darker colors,
and I began lightly brushing the surface of the mirror with that white wax, and then I took a cloth
and rubbed it in in certain areas and removed excess wax where I didn't want it to be as heavy.
I kept doing this until I got the desired look, and I even used a small painter's brush in order to
get throughout all of those nooks and crevices between the wooden beads. Finally, when everything
was dry, I cleaned off the mirror, and I placed it on my mantle, and here is how it turned out.
Another really easy way to change up your decor is by using vase or bowl fillers, and I love
using these decorative balls, and you may even have some styrofoam balls left over from your
Christmas DIYs, so get those out so that you can use them during the winter. A super easy way to
create your very own decorative balls for your space is by covering up styrofoam balls with rope,
and even if you don't have that much rope, it's okay because if you combine more than one,
you can cover more surface area, and it will give your decorative spheres a lot more interest,
and it's so easy. Just make sure you start very nice and neat, and keep holding and pressing down
the ropes as you hot glue them around, and then just make sure you do this very tightly and keep
everything nice and consistent as you move. Working in small sections is going to give you
the best result, and of course, you can use this with one type of rope, one color rope,
or you can mix and match like I do because I think it just makes them a little bit more elevated as
far as looks is concerned, and you can just use a lot of different textures. Also, when you get to
the very end, just make sure you take your time and hot glue it nice and cleanly down so that it
looks very professionally made. I have made so many of these throughout the years, and they're
so easy to make. It's just a nice option to have in your stash when you need to change things up.
Now, I also love using what I have on hand, and I like upcycling things,
and I needed something for some toiletries as well as some hand towels in one of my kids'
bathrooms, and I had this plastic bin, and of course, since I love doing these rope DIYs, I had
a lot of this stuff laying around, and this is actually cording for cushions and stuff like that,
so I had that, and I thought I might as well use it as well. First thing, I wanted to make sure that
I covered all of that red, both inside and out, so I started with the inside, and I just had these
sheets that you get at Hobby Lobby for like four for a dollar, and I started cutting them down and
gluing them onto the inside of it so that I didn't see any red and kept everything a nice and neutral
color. Because I didn't have enough of the gray, I decided to use gray for the bottom of it, and
then I used white for the walls. The most important thing is to keep everything nice and even and glue
everything as closely together as possible so that you don't see any seams. Once the inside was done,
I began to add the cording on the outside perimeter of the little bucket. Now, I did start
from the bottom, and I worked very small sections, and I hot glued along as I went, holding it down,
making sure that I added pressure so that there was no gaps in between the individual cording
pieces. That's the thing about these kinds of DIYs. In order to make them look as good as possible
with whatever materials that you have on hand is to make sure that the application is nice
and clean and smooth, and that you don't see what it used to previously be. So, we wanted to make
sure we covered that red as well as that Merry Christmas on the exterior, and as you can see
here, I'm changing out the rope because I wanted to add a little bit of a different element, and
because I didn't have enough of the larger rope, I decided to just add it in this small section
here, and then I added the same cording that I began with to the rest of the basket. Now, before
I made it to the very top, I wanted to make sure that I wrapped the little handles, and I'm using
some leather string here. It's basically used for jewelry making, but I had it on hand and it matched
perfectly, so I thought I'd use it for the handles to make them a little bit more sturdy, and then
once I was done with those, I continued with my cording and made sure to wrap around them as well
so that you did not see any of the red plastic underneath, and I even added a little bit of
so that you didn't see the seams between the white and the gray felt.
Now, this is probably one of my favorite DIYs, and I'm going to encourage you to look at things a
little bit differently when you go to the thrift store. Now, this leather green purse caught my eye
at one of my local thrift stores, and I just had to get it because it was just a beautiful green
color. Of course, I wasn't going to use it as a purse. I wanted to take it apart and create
several DIYs from it, as a matter of fact, but this one in particular is, I wanted to do cushions
for my chairs, and I had this great idea because I saw this inspiration on Ballard Designs
of a color block pillow, and I thought it was just beautiful. However, mine is with leather
instead of velvet, and because I love to sew, I already had some of this tan fabric on hand. I
just had to cut it down in order to create two sort of lumbar cushions, and so I cut everything
into measure, and of course, if this is something that you'd like to make, it would just depend on
the size of the fabric that you can remove from your purse, and I just wanted to make sure that
I used as much of it as you can see here, and I was grabbing as much of it as I can get, making
sure I got as close to the seams as possible. Now, once I cut the pieces out that I needed,
I made sure to center it where I needed it on the cushion, and then I began to attach it to the rest
of the fabric. Now, of course, this does require a little bit of sewing skills. I would not recommend
gluing this as a project, just because it's just not going to end up being as durable or lasting
as long, but of course, if you can sew a straight line, you can definitely do this. Now, I did decide
to go a little bit extra and add an additional feature to this pillowcase, and I took another
piece of the purse, and I added it to the front area where that green leather was, and I sewed it
right on the center. Now, in order to be as cost effective as possible when I create cushion covers,
I usually don't do a zipper and just do an envelope closure on the back of the cushions,
and that's what I'm doing here. All that is left is to put the pillowcases
right side out, add some inserts, and there you go. This is a super easy upcycle that you can do
with anything that you may have on hand in your home right now, and I'm looking at these little
plaques right here. I got them on clearance. I loved the shape, and I loved the ornateness of
them, but I did not like the color, and I thought it would just be a great way to show how you can
update something like this that you may have on hand to find on a thrift store with something
that has a raised surface like this, and all I'm doing here is adding some white paint to it.
Of course, this is a clay-based paint. You want something like this that can be activated with
water because after we color this completely, we're going to be removing some paint in order
to showcase the details of the raised portions of this little plaque. Now, once the paint was
somewhat dry, I came in with a damp cloth, and I began rubbing all the raised areas so that I can
remove the paint, therefore revealing the pattern that's underneath, and I personally think this
looks so much better than having the solid color. This definitely showcases what the pattern is on
each of these little plaques, and I just think this is such a great and easy way to update
something that you have at home that you may not like that much anymore but still has good bones,
and if it has a raised textured surface like this, this is all you have to do, and finally,
in order to preserve the finish, I'm just adding some clear wax to seal it, and that is it for this
super easy and quick DIY. Now, if you have a mirror lying around your house and you wish to update it,
here's an idea for you. I've had this mirror for a while, and I was kind of tired of the black look,
but then I saw this one at Kirkland's, and I thought it was just absolutely beautiful,
so I decided to go ahead and give it a makeover, and this can apply to any style mirror that you
have. There's always ways to update them instead of having to invest in a new one, so first thing I
did was take off the mirror, and then I began placing the half beads all the way around the
perimeter. I wanted to make sure that everything laid nice and even, and I knew exactly where I was
going to glue them beforehand. I didn't want to start gluing them on and then reach the end and
end up with a gap or with a space where I couldn't fit a full bead, so by laying them out first
throughout the entire area, you know exactly how to space them out and where you need to adjust so
that it looks nice and clean at the end. Then, I came back and began hot gluing the beads one by one,
making sure that I did not disrupt the way I had laid them out to begin with. Now, in hindsight,
I would have used E6000, but it's okay. They've lasted still to this day. Next, I began staining
each and every bead, making sure that I got in around all of the nooks and crevices, and the
best thing to do this was using an artist brush. Once all the beads were painted, I came in with
white paint, and I began to paint all around the beads. Now, you're probably going to wonder why I
adhered the beads first and then painted, because then obviously I'd have to go in between all of
the beads, as you see here, and yes, that was a little painstaking, but the reason why is because
I wanted to attach the beads onto the frame of the mirror and not the paint, therefore making it
easier for them to just pop off, so that's why I did it this way. Now, if I got any white paint on
the beads, it was okay, because I was going to come back with some white wax anyways, and it was just
going to kind of all blend in. After I was done painting it and everything was nice and dry, I came
in with a damp cloth and began to kind of distress all of the raised areas on here, as you can see,
so that I can get some of that black to come out through the white paint. After that was done, I
applied some clear wax in order to seal the entire mirror and protect the finish, and then I began to
add some white wax throughout all of the beads and all of the frame. I wanted to give it a little bit
more of a distressed whitewash look, so that everything kind of blended nicely together.
I gave everything a final wipe through and cleaning, and now I have a brand new mirror.
Well, that's it for today's video. I hope you enjoyed it. If you did, please make sure to give
this video a thumbs up, and let me know in the comments below which one of these was your
favorite. If you have not subscribed already, please go ahead and do so. I hope this inspired
to use things differently. Use what you have, as well as use items that are very inexpensive
and different mediums in order to create neutral items for your home. I will see you back here next
time. Until then, adios!