Fish ANYWHERE with just THREE Carp Rigs

Recreational Fishing.
1 follower
Aug 24, 2025 #fishing #entertaiment
Today I'm going to show you three different rigs for three different angling situations,
meaning that you can catch carp wherever you go. So the three carp rigs that I'm going to show you
today are the hair rig, possibly the most simple and easy to tie rig of all time, the chod rig,
which will enable you to present baits even on lakes that are very silty and weedy, and the zig
rig, which will come into play when the fish are swimming in the upper layers away from the bottom.
So let's start with the hair rig. To tie up a hair rig, you're basically learning to tie
something called a knotless knot. This is where you pass the line through the eye,
wrap the line around the shank, trapping the hair in place, and then come back through the eye and
tighten it down. This basically gives you the chance to put your bait onto a loop of line that
hangs beneath the hook, meaning your hook is always exposed, ready to hook into a fish,
and also meaning the bait can't mask the hook point or get in the way of a fish getting hooked.
The hair rig is best fished with a sinking bait, such as a boilie, sweetcorn, peperami,
something like that, that will be sitting on the bottom. However, if you find yourself wanting to
fish with a buoyant bait like floating sweetcorn or a pop-up, you can convert the rig into a pop-up
simply by pinching a split shot a centimetre or two away from the hook. I'd be switching over to
a pop-up if I was fishing over quite a large bed of bait and I wanted the fish to notice my hook
bait first, or potentially if there was a little bit of weed or leaves and twigs and stuff on the
bottom and I wanted my bait just to sit up away from that so the hook didn't get stuck in any of
that detritus on the bottom. The hair rig tends to work best when you're fishing over an area
of the lake bed which is relatively firm, so gravel, clay. Some silt is fine but not really
soft slimy silt because you don't want your hook bait being pulled down and disappearing into it.
When you're on a lake which is full of weeds, soft strandy weeds that are coming up towards
the surface or on somewhere with deep slimy silt, you actually want to use a chod rig.
The chod rig is designed so that your bait, a buoyant pop-up, it can be a piece of floating
corn as well or potentially a piece of cork or something, but your floating bait is on a short
section of line that slides up and down the main line or leader. What this means is that your lead
which is attached to the end, the lead can fall into the silt or fall into the weeds, disappear
into that thick slimy horrible stuff but your bait slides up and settles down gently on top of any of
that. This kind of means that you can chuck a chod rig into a swim where otherwise your hook would
just end up buried in something or you'd end up tangled and snagged in the weeds. A chod is kind
of what I go to if I'm not going to be casting around, not using a marker float, not looking for
spots, not trying to find clear areas. If I just want to throw a bait straight out there, see a
fish jump, chuck it on it, it will normally be a chod rig that I'm throwing out because it will
present and settle down on top of pretty much any type of lake bed. Whilst the chod rig isn't
particularly easy to tie, you can get really tied ones available and I'd actually say a chod is a
good rig for beginners to use because you don't necessarily have to feel your lead down,
you don't necessarily have to bait a spot in advance or work out where the clear gravel
spots are between the weeds. You can kind of cast a chod rig pretty much anywhere
and have your bait presented and give yourself a chance of a bite. When I'm fishing with a chod,
it's either that I'm fishing without any loose feed and it's just a single hook bait blasted
out there because I've seen a fish crash or I will bait with boilies. The reason I'll bait with
boilies rather than like particles or pellets and stuff is because when you hook a fish on a
chod rig, you kind of need that fish to be moving, you need the fish to be picking up a bait, moving
along, taking your hook bait, moving to go and find another boilie and that's when the line
tightens up and you hook into the fish. When I'm fishing in weeds, particularly with the choddie,
I will loose feed around it maybe with half boilies. So by chopping the boilies in half,
they flutter down a bit slower and come to rest on top of the weeds rather than sort of falling
in the gaps going all the way to the bottom. When you're setting up your chod rig, you've got to
choose where you're going to place your bead, your top bead. The way the choddie sort of works is
you've got your lead on the end, you've got a chod bead that stops the actual chod rig from
sliding down to the lead and then somewhere above it, you set your no trace bead. This is kind of
like a little bead that can pop off of the line if you snap up, making it a safe rig. But where
you set that is based on how deep you think the silt or weeds are. If you're fishing in a lake
which you know the silt is really bad or there's weeds that are like a metre of weeds, you want to
set your bead at the top right far up so that your hook bait can slide really far whilst the lead
disappears down into the silt and it will come to rest on top of it. However, somewhere which is a
little bit firmer on the bottom and it's only low lying weed, you could set your bead just a few
inches up from the lead. Some people will fish their chod rigs on a leader, be that lead free
or leadcore leader and other people prefer to use it straight on the mainline. My experiences are
fishing weed where there's quite a lot of weeds coming right off the bottom. I like to fish it
just naked on the mainline. It sinks a little slower, settles down over it more naturally
and the mainline can be actually more camouflaged than what a leader can be. However, if you're
somewhere maybe quite snaggy or there's not a lot of weeds on the bottom, potentially you're fishing
over a more clearer area, then a leader can be better because a leadcore for example is very
heavy, weighs down, keeps it pinned down to the bottom away from the fish's fins and if you are
fishing somewhere with lots of snags or danger like that structure, then having that leader is
going to give you more confidence that you're not going to get cut off. Now, the next setup that I'm
going to talk about is the zig rig. This is something that comes into play when the carp
aren't feeding on the bottom, so you're not seeing any bubbles coming up, you're not seeing fish
taking baits off the deck. Instead, they're all cruising around in the mid-water or they're
swimming around just underneath the surface. You need to be able to tie a zig rig. A zig is set up
with a monofilament line. Normally, people use something that's reasonably thin so that it's
quite invisible and you'll fish it with a buoyant hook bait, be that a piece of foam, some cork or
pop-up. Some people, especially in winter time, to add a bit of movement to the hook bait will use a
piece of foam with a couple of maggots super glued to the top. I know people have done well on that,
but loads of anglers will literally just fish a lump of black foam whipped onto the back of a
size 10 hook, fished on a length of mono off the deck and it just seems to unlock places where
the fishing is really difficult. When no one's had a bite off the bottom for weeks on end and
you just can't work out how you're going to catch these fish, putting a zig out can be an absolute
game-changer, especially if you experiment with the depth. What you find with zigs is that they're
not very effective if you've got them set to the wrong depth. If all those fish are cruising around
just beneath the surface, you really need to get your marker float out, count how deep it is with
the float and then tie up a zig that's just going to sit beneath that. On lakes which are really,
really deep, zigs can be more complicated. You'll need to learn how to tie adjustables. However,
on most lakes, you'll be okay tying up fixed zigs. You can also use zigs to improve your surface
fishing. By that, I mean try tying up a zig that's just a little bit deeper than the water in front
of you so the bait actually sits up on the surface. That way, you could have a couple of rods out
concentrate on feeding and when a carp comes along and takes your bait off the surface, it will hook
itself against the weight of your lead. It's not necessarily as enjoyable as fishing with a
float and watching them take the bait and striking, but it can be super effective, especially at longer
ranges when it's hard to see your hook bait. Finally, there's a rig which isn't really a rig.
You just tie a hook on the end of your line and that is freelining. It feels wrong to not mention
freelining because I've caught some of my biggest ever carp literally using line and a hook. Whilst
there's all these different rigs that will enable you to fish effectively in different depths and
over different lake beds, freelining is quite possibly the best way to go and catch yourself
a bigger carp. Yes! Did that really just happen? Did that really, really just happen? Because you
can select the fish that you cast in front of. I might hook on some maggots, a worm, sweet corn,
or fish on the surface with bread and dog biscuits, but being able to flick a bait out in front of a
fish, tease it back in front of its nose, pull it away from the smaller ones, it's definitely going
to put the odds in your favour as far as selecting a bigger carp. If any of the rigs in this video
were confusing to you or you want to learn how to tie them in more detail and learn more about them,
I've got links down below in the description to this video to full films which will explain
exactly how to tie each of the setups. Hopefully you enjoyed watching and learned something. I'll
see you guys on Fishing Tutorials channel again soon. That was a very exciting bit of fishing.
I'm happy that the stalking paid off eventually.
