Medieval Inventions that Changed the World Mechanical Clock, Water and Wind Mills, Eyeglasses Part 1

Inventions and Inventors
25 followers
15 Video Views·Aug 21, 2025
Comments are disabled for this video.
During the early medieval period, many different time-keeping devices were used. Nearly all of
these devices had been adopted from the period of classical antiquity with little to no innovation
happening in time-keeping devices during the early medieval period. Among the traditional
time-keeping devices used at the time were water clocks, candle clocks, the use of astrolabes for
determining time, and sundials. It was during the High Middle Ages that new methods of time-keeping
were discovered and new instruments discovered for the purpose. It was around this time that
the earliest mechanical clocks were created by the Christian monks who had extensive knowledge
of astronomy. Christian monasteries around medieval Europe had a specific need for
time-keeping since monks had to strictly observe the hours of daily prayers. For this purpose,
the monasteries used many different types of time-keeping devices. Since monks also had access
to classic literature on astronomy, mathematics, and other subjects, they were in a unique position
to be able to invent new time-keeping devices. This need for time-keeping led to the development
of the earliest mechanical clocks in the 10th century. There is historical disagreement as
to when the oldest mechanical clock in medieval Europe was invented. Pope Sylvester II built a
clock for a German town in 996 and it is considered one of the oldest clocks. By the 11th century,
clocks were being used in different parts of Europe. However, the use of proper mechanical
clocks which utilized heavyweights for time-keeping is more accurately dated back to the 14th century.
One of these clocks was built by a monk at Glastonbury in the 14th century and exists to this
day. From the 14th century to the 15th century, mechanical clocks evolved so that they began to
use a spring-powered operation rather than relying on heavyweights. However, these clocks had to be
wound up twice a day by the monks for them to function accurately. When the earliest mechanical
clocks were invented in the 14th century, they only carried the hour dial. This was because the
preeminent need of the time was simply to keep hours accurately and even that was considered a
major technological leap. By the 15th century, however, mechanical clocks with even more detailed
dials were being constructed. By the final quarter of the 15th century, multiple sources suggest that
mechanical clocks with a minute and second hands were in use in many parts of Europe. Before soon,
innovations in the construction and sophistication of mechanical clocks also led to the development
of the pendulum clock which was more accurate, less expensive to create, and more readily available to
the people. At the time of the invention of mechanical clocks, the primary use was in the
They were typically used to keep track of hours for daily prayers, to help monks calculate solar
and lunar eclipses, and to determine feast days with accuracy. By the middle of the 15th century,
mechanical clocks also began to be used at secular establishments and buildings such as castles,
courthouses, and council chambers. The concepts of magnification and optics in general are ancient,
but it wasn't until the medieval period that lenses became wearable. Historians have estimated
that the first European glasses were invented around the 1280 CE in Italy, based partly on
the sermon by Fra Giordano of Pisa in 1306. Glasses were one of those inventions that
seemed to spring up from many inventors' imaginations at the same time, making it
impossible to pin down who the first inventor was, no matter what the good brother may have said,
but Italy seems to have been the hotbed for optometry. This, perhaps, is not so surprising,
given that glassmaking in Italy went hand-in-hand in the Middle Ages. Some of the most impressive
and sought-after medieval glassware was known to be made by Venetians. Medieval glasses didn't have
arms to go over the ears at first, they were of the Ponsnay variety with two lenses riveted
together in the center. This meant that wearers would either have to hold them while using them,
or pinch them tightly onto their noses to keep them in place.
Not super comfortable, but worth the effort. These early glasses featured convex lenses to
help the farsighted focus on items up close. Concave glasses were invented in the early
modern period. As James B. Skeneman's notes in Artifacts from Medieval Europe, bone,
wood, or metal were used for frames at first, but in time wire and leather might also house
the lenses. Leather glasses sound amazing. As time passed, glassmakers became so proficient
and knowledgeable about their product that it was possible for the Duke of Milan to order 200 pairs
in 1466, all of varying strengths. The Duke specified that he wanted the strength of the
lenses to increase based on an average person's ocular degeneration from ages 30 to 70 in five-year
intervals, presumably so that he'd have a new, stronger pair to wear every five years.
This means that his glassmaker had the information to create such a variety,
which in turn suggests enough glasses were being produced that glassmakers could figure
out averages such as lens strength based on age. That's pretty impressive. While it was probably
difficult for the lowest classes to buy glasses, our friend the Duke was generous enough to buy
glasses for young people with vision problems, too, they had to have been somewhat affordable
for them to be as ubiquitous as they seemed to have been. The variety of materials with which
glasses could be made would have helped make them widely affordable and stylish. Apparently,
medieval hipsters were wearing glasses for fashion's sake before they became cool.
Because glasses and contact lenses are so common today, it's hard not to take them for granted,
but when you think about it, the fact that half the world wears glasses speaks to what a game
changer the invention of eyeglasses was for society. While a common theme in medieval
paintings of glasses is of studious monks and saints writing, glasses made it possible for
people of all walks of life to continue to read, to write, and to work at both their hobbies and
professions much later in life. It also meant that people could overcome vision problems that
would have been nearly insurmountable before. No wonder Fra Giordano called making glasses
an art which is one of the best and most necessary in the world. The earliest recorded
image of glasses is a 14th century fresco painted by Tommaso de Medina in Treviso, Italy, which
features a portrait of a bespectacled cardinal who actually lived before eyeglasses were invented.
Artistic license, right? One of my favorite images of medieval glasses, though, is just the
outline of them, found in an 11th century book, which you can find on Eric Quackle's blog.
Quackle also features a pair of wooden glasses a medieval person lost by dropping them in the
toilet, which just goes to show that glasses were as hard to keep track of then as now.
Some things never change. There were many sources of power used before the industrial revolution of
the 18th century. The use of slave labor was the first source of large-scale power.
This was followed by advances in animal power that were made possible by the invention of tools
such as the horse collar. Even more significant was the success of medieval technology in harnessing
water and wind power. The water wheel is one of the oldest sources of power known to men.
It was the first type of power harnessed by men that was not generated by animals or humans.
When combined with the proper equipment to form a mill, water wheels were used to grind grain,
drive sawmills, power lathes, move pumps, forge bellows, make vegetable oils, and power textile
mills. It served as the main source of power for medieval Europe and necessitated that most
towns needed to exist near water to make use of this type of power source. It was estimated in
the Doomsday Book that there were nearly 6,000 water mills in England at that time, and many
sources believe that this number more than doubled in the next 200 years. The water mill served as a
primary power supply until the advent of the steam engine during the Industrial Revolution.
From a modern perspective, the operating principles of the water-powered mill are
quite simple. To generate energy, water is directed to a wheel and propels it in a circular motion.
The spinning wheel transfers the power to a drive shaft that can be used to move many pieces of
equipment. These were originally used to turn millstones and grind grain later,
this generated power was harnessed to drive other types of tools.
There is evidence that water power has been used since at least 300 BC in Egypt. It is possible
that that this technology may have been adapted from cultures such as the Persians or the Chinese.
The earliest known examples of water mills used past examples of water power to utilize
wheels that were flat on the water and attached directly to the drive shaft in a horizontal design.
When the wheel turned, southwest did the drive shaft. Because this type of setup was inefficient,
water wheels with a vertical design were soon being manufactured.
These types required different engineering because there was a need for gears and cogs
to transfer the power to the mills. There were two types of vertical water wheels put into use
at this time. The undershot wheel rests directly in the stream and depends upon the force of the
water to push the wheel. Therefore, without a constant level and flow of water, the wheel
cannot generate much force, and it is useless in times of low water flow. The overshot model is
much more efficient and depends much less on the amount and force of water because it uses the
force of gravity to help drive the wheel. Water is channeled to the wheel via a flume or pipe and
is dropped directly on the paddle of the wheel. The wheel spins and drives the shaft allowing the
power to be harnessed as the user sees fit. As technology increased towards the later middle
ages, milling operations became more and more complex. The earliest form of grinding grain
between two stones was adapted for use in a water mill. Grain was pounded between two millstones
until it became meal. The bottom millstone was fixed while the top millstone that was powered
by the water wheel could be separated to control how coarse the meal turned out. Both stones were
corrugated so that the grinding motion of the top stone would then crush the meal to a desired
consistency. Additional wheat to be ground could be added to the mill through an opening in the top
stone. The meal was then sifted through sieves to obtain flour. A group of individuals who took full
advantage of the water mill technology during the middle ages were the Cistercian monks.
This monastic order was founded in the year 1098, just after the water wheel had revolutionized
Western Europe. Early in the 12th century, Saint Bernard took over the order and attempted to gain
social freedom by utilizing water mills to provide financial independence. Within the next 50 years,
the Cistercians had reached the cutting edge of water power and agricultural technology.
Monasteries were built on artificially manufactured canals that ran throughout the complex.
This source of running water provided power for activities such as milling, wood cutting,
forging metals, and making olive oil. It was also a source of fresh water for daily needs and
fulfilled the needs for sewage disposal. The Cistercian monasteries were great examples of
organized factories that proved to be important in commerce of that time. Other sources of power
that appeared during the middle ages were the windmill and the tidal mill. The windmill appeared
before the end of the 12th century. While not efficient due to a dependence on the amount of
the prevailing wind for power, windmills could grind grain and perform other tasks similar to
water mills. As the technology advanced, more efficient windmills were developed. These enabled
power to be utilized in areas that were far from sources of water, provided there was a reliable
amount of wind. The tidal mill, which appeared around the same time, attempted to use the power
of the changing tide to provide energy for the mill. While their use did not appear to be widespread,
the tidal mill more than likely had a significant favorable impact on the local populations that
used them. Water mills helped to change the way of life in medieval Europe and affected all levels
of society from each individual to entire countries. Certainly water mills had an immediate
and direct impact on the people who operated them. This positive influence would have been primarily
in the saving of time and money. People could do a larger amount of work in a shorter amount of time
and for lower costs with a water-powered mill. While not usually considered to be part of the
industrial revolution, the mill was a precursor to that era. The price of human labor was quite
expensive, so allowing a mill to do the majority of work was very cost-effective. One person could
now do the same job as many with the help of the power generated by the water wheel.
It does not seem, however, that many people used this technology to increase their leisure time.
Rather, it seems that this technological advancement was used to increase greatly
the manufacture of certain goods and materials for sale and profit. The mill often served to
shift the industrial organization and power from urban centers to more rural areas closer to water
sources. Thus towns became more powerful, often at the expense of cities. One good example of this
was the application of water power to the industrial process known as fulling. Fulling
was the process of shrinking and thickening cloth. Prior to its use in water mills in the 13th
century, fulling was carried out by individuals stomping on the cloth by foot or beating it with
a bat. This was obviously a very time-consuming and labor-intensive process. The fulling mill
allowed the work to be done by wooden hammers powered by water. Now, only one man was needed
to ensure that the cloth moved properly through the machinery. This process revolutionized the
industry and initiated reform. The majority of work was now centered in rural areas instead of
urban centers. The effect that this mechanization had on the establishment of national markets
cannot be overlooked. Now that goods were produced at a faster rate, with greater quantity, and at
less expense, new economic frontiers could be explored. Large national markets were established
to find outlets for the increased availability of goods. Water mills diminished much of the human
labor costs by providing power for grinding grains and other goods, tanning hides, pressing
vegetables for oil, sawing wood, forging metals, polishing armor, pulverizing rock, operating blast
furnace bellows, and crushing mash for beer. The water mill served as the major source of power
prior to the invention of the steam engine. Its technology was constantly being upgraded and new
uses were found for the generated power. These advances in technology that led to the improvement
of the water mill were eventually applied in other fields. As an example, the switch from the
horizontal to vertical water wheel required gears to be used on the drivetrain to transfer the power.
This mechanized process became quite complex with successive improvements and these ideas were later
adapted on a smaller scale to make clocks and other similar mechanical devices.
Water mills also served to change the balance of power, both locally and nationally. On a local
level, whoever operated and controlled the mill had the most power. With a working mill, the town
could prosper from the increase in trade. The increased output of goods intensified the demand
for raw materials, which was largely met by local merchants. As revenues increased, the town could
afford greater protection and thereby was safer. These same ideas could be applied on a larger
scale for a countrywide level. The use of water mills enabled countries such as England to open
new markets and significantly benefit from this commerce. The water mill had a significant
influence on medieval society and left its mark at many levels.
