#furnitureflipping#furnituremakeover#furniturerestoration Ever wonder what 50 years in someone’s basement looks like? Well this Art Deco Buffet Restoration shows you JUST what is possible. Never discount Granny or Grandpa’s discarded furniture! Join me as I refinish this vintage gem, I think you’ll be pleasantly surprised! 😁
Please SUBSCRIBE and hit the LIKE button to HELP my NEW channel GROW 🌱 and THANKS for watching! 😘
Okay, this is my latest piece of furniture that I'm going to refinish.
A beautiful Art Deco piece, or it will be beautiful. It's beyond tired. It's next to
death. It's not in good shape at all. On the positive side, someone put down
MacTac on the top, probably to preserve the finish. Now, of course, they might have
also stuck it down because they were trying to cover up some damage. I will
only know for sure once I remove it. I'm hoping for the former. There's a funny
backstory to this piece. I found the matching china cabinet on Facebook
Marketplace, and while I was picking it up, the man I was dealing with showed me
the matching buffet, which is this piece. It was behind a lot of junk in the
basement, and the doors were full of stuff, and I couldn't really open them,
and I couldn't get around it to have a really good look at it. So he was in rough
shape, so I just passed on it, and I didn't have room in my truck anyhow.
Fast forward to a few weeks later, I finished redoing the china cabinet and
was so pleased with the transformation that I reached out to him to see if he
still had the buffet, and luck was with me, and he did have it. So I went and I
picked it up. Okay, what do I have to do to make this piece look good again? Well,
number one is taking it apart to see if there are any structural damage that
needs attention. Number two is giving it a good cleaning so I can work on it
without cringing. And number three is really just getting down to work. So here
we go. When you have a particularly nasty piece of furniture, it is always better
to remove the back. It just gives you easier access to the inside from both
straightforward. This is what years of neglect looks like. Stay tuned and I will
show you how to get both the bakelite and the brass looking good again.
Okay, so I'm going to try to take this MacTac off, see what's underneath it.
Well, I hope it doesn't look like a veneer, but it seems to be just missing the
finish, which is not a bad thing. I'm using some hot water on a cloth to try
the bottom part of the drawers. It will make refinishing the inside so much
edge along with a bunch of nails on the top. It's it's just gonna make taking the
bottom off a bit more challenging. Hopefully it is hide glue because I can
then heat it up and it will melt the glue and I'll be able to pull the bottom
fix later. This is the middle drawer and it has a different veneer on the front
from all the other drawers and doors. It is also the most damaged and needs a bit
the veneer that was pulling back so I glued them last night and clamped them
I'm just going over them checking to see what repairs are needed. Quite a few of
the drawers have little pieces missing like here the veneer so I'm gonna be
gluing the spots down that need to be glued and then filling. They're pretty
small so I think I'm gonna fill most of them just with some wood filler as
opposed to trying to do veneer patching. There's I think a spot inside the
scraping the doors. I've clamped it down on my workbench because that makes it
easier to scrape without the door moving around. I flip back and forth between
using my large Baco scraper and the smaller triangle one being very careful
around the veneer seams. What you didn't see in the last clip is the missing
chunk of veneer. I will chisel out a piece and do some veneer replacement to
I have on hand and I will color match it later. Also I'm using two pieces to build
work this is where I'm at. I haven't even touched the top yet. I'm going to
leave the top to the very end but I've got most of the inside done meaning I've
sanded it to 80 grit. I've scraped most of the finish off the detailing here.
Obviously I haven't done the shelves yet. It was on its side so it was really hard
to scrape so I'll do those a little later. Then I have to attempt this which
won't be fun. I hope I can get something decent out of it. Compared to the top the
where it started. I've got a little bit of that black stain still there. I'm gonna try
some oxalic acid tomorrow on the whole top and see if that takes out a few of
the stains. There's a kind of red stain here as well. I don't want to
sand too much because it is veneer. There's a black stain over there but all
in all in pretty good shape compared to what we started with. I've got
everything sanded to 150 except for the inside shelves which I'm about to do
right now and the bottom right there. I still have to do bottom there. I've done
that part already. It's coming along. Sanding is almost done.
The sides are looking good. After the sanding is done then I'm going to start working on
the veneer patches. There's a piece missing there, a little piece
there. I started here mainly because I kept ripping it as I was
sanding it so I decided to to glue it down. It's really hard to glue though in
the garage right now because it's so friggin cold. Here is the door that I
patched up so I'm going to sand this down and just generally fix up the door.
Meaning I'm gonna sand to 220 because I think I've got it sanded to 150. I'm
not mistaken. There's some glue marks here that I have to get rid of and then
then I'll be ready to put the finish on. So almost there. Here's the patch that I
did recently to the outside of one of the doors. Now I'm gonna cut it with an
exacto knife and then I'll sand it down. Actually I think I'm gonna actually
put a clamp on it just so that it's a little bit steadier. Clamping is always a
good thing. And I'll get a piece of wood so the clamp doesn't dent that.
I've done it too many times where I don't use a piece of wood and then it
because I clamp it hard it makes a dent in the softer wood. That just doesn't
look very good. There that's good. Okay so let's see if I can get in here. I've made
it kind of hard for myself because I'm filming this. I don't have a lot of room here but we'll
noticing my sandpaper wasn't working as well as before so I grabbed my sandpaper
that came with the buffet? Well they were beyond saving so I found some new ones
on Amazon.
I am finally getting to the point where I am applying stain to the drawers and
doors. I decided to stain everything with General Finishes gel stain in the color
nutmeg because I'm trying to get a more cohesive look to the piece and there are
so many different patterns going on with the veneer not to mention the lighter
wood species used around the edges. So I thought using the gel stain would just
taped off where I want the stain to end. A little later I will apply hard wax oil
the veneer repairs I did. I made a little test strip on walnut veneer of the
different colors to see which match the best. I'm using an artist's brush to
lightly brush on the color so it blends just a little bit better. I finished
applying the Gilboys hard wax oil to all the drawers and doors and now I am
applying the gold beeswax to just give it a bit of extra protection and shine. I
apply it with a 4-0 steel wool and rub with the grain of the wood. In about
months always slow down my furniture refinishing but it isn't any less
enjoyable and it does force me to go with the flow. I do what I can do when I
can do it and what more can you ask. Enjoy the next few minutes of my before
and after photos. I think you can already guess it turned out pretty good. And
Merry Christmas and Happy 2025 to all my MCM redo fans out there. I can't wait to
create more in the new year. Bye bye.