Wineglass with Flameworked Flowers

Art Creation
8 followers
There are a number of ways of making glass tubing
without glassblowing.
This is one.
A gather of glass has been made on the end of a metal rod.
The edge is being pincered,
and at a certain point,
the pincered edge is pulled outward,
and this begins to draw glass tubing
from the reservoir at the end of the metal rod.
If it's pulled quickly, the diameter is small.
If it's pulled slowly, the diameter is greater.
When the glass is stiff,
the ends are cut.
After the tube has cooled,
one end is heated in a flame.
As the glass softens and becomes less viscous,
surface tension causes the edge to round,
and eventually, the hole closes.
When the end has closed,
air is blown in the other end,
and the bulge forms.
In at least one example,
the heating was stopped too soon,
and a tiny hole was left.
Here, the hole is almost closed,
but not quite.
Blowing begins.
There's enough pressure to inflate the glass,
but a tiny hole remains on the end.
