8 Brand-New Firearms Just Landed! July 2025 Edition.

S&W
1 follower
6 Video Views·Aug 17, 2025
2025's been a wild month for gun folks. New hardware's dropping left and right,
and some of it's the kind of iron you'll be talking about at the range for months.
From fresh-built guns, to returning classics that eat like they're starving.
This lineup isn't just about new guns, it's about where the industry's headed next.
What's up everyone, this is Ted from Line 4-5, and today, we're diving into the latest gun releases
as of July that are already turning heads and making wallets nervous in all the best ways.
Before I start, I would really appreciate it if you would push those buttons below,
the subscribe button, the notification bell, all of them. This is not necessary,
but those little clicks help a brother out. Plus, it pushes me to give you more
valuable gun-related content on your screen. Now buckle up, and let's get back to the video.
Savage Revell DLX, Suppressor Ready
I've always had a soft spot for rimfire lever guns,
but the Savage Revell DLX Suppressor Ready .22LR takes that nostalgia
and builds something that flat-out works for today's shooters.
Savage rolled this out as part of their new Revell series, and the DLX trim is the premium setup.
Satin-finished Turkish walnut, clean fit and finish,
and a threaded 18-inch carbon steel barrel ready for your favorite .22 can.
The 12-shot under-barrel tube magazine is smooth to load,
and the action cycle's subsonic or high-velocity rounds without drama,
as long as you don't short-stroke it. With a comfortable 14.5-inch length of pull,
it actually fits full-size shooters without feeling cramped, something a lot of .22 levers miss.
I ran this rifle over a few months with a mix of CCI subsonic HPs,
mini-mags, and Federal Champion solids. Suppressed with a silencer co-switchback,
the subsonics were Hollywood quiet. Honestly, the lever's clack was louder than the shot.
Cleaning is painless thanks to the tool-less takedown,
and the captive pins mean you're not losing small parts in the grass.
Accuracy? Steel at 100 yards with irons was easy work,
and with a scope base installed, you could stretch it further.
Built in Savage's Lakefield, Ontario, plant, which is famous for decades of rimfire production,
the Revell DLX feels like it'll be around for the long haul.
Sure, I'd like sling studs and for Savage to ditch that giant forearm sticker,
but for a suppressor-ready, North American-made lever gun that shoots as nice as it looks,
this one's tough to beat. And that's exactly why it's one of the standouts in the July 2025 lineup.
Shadow Systems CR920XL
I'm picky about carry guns, and the Shadow Systems CR920XL checks the boxes that matter
Launched the 18th of July, 2025, it's the newest entry in the CR series,
and aims squarely at that sweet spot where a slim pistol carries easily but shoots like a bigger gun.
Shadow Systems leans hard on revised slide geometry for a flatter impulse,
and they're not shy about saying it stays stable across weak ammo or less-than-perfect grip.
Fair claims to watch for once more folks get rounds through it.
Specs read like they were written by someone who actually carries
4.18-inch match barrel, 7.45-inch overall length, 19.5 ounces unloaded,
and a trim 0.86-inch width, so it disappears under a tee-through shirt.
Capacity starts at 1.5 plus 1 with the extended mag,
and it's compatible with an 18-rounder if you want extra headroom.
You get a flat 4-4.5-pound trigger, multi-footprint optic cut for direct mounting,
accessory rail, and nitride finishes with a choice of bronze Tysian or black barrel.
Height with the extended mag is 5.18 inches,
which hits a nice grip length for most hands without printing like a brick.
Damn, that's thoughtful.
Real-your-world availability is already popping up,
with retailers listing Alita trim models that add slide windows,
spiral low-fluted match barrels, and co-witness sights.
Basically the buy once, cry once, configuration for EDC nerds.
If you're building a carry setup, this looks like a no-nonsense base
that takes an optic well and doesn't punish you on recoil or concealment.
From here, I'd pair it with a compact enclosed emitter dot and call it a day.
Smith & Wesson M&P Shield X
The Shield X doesn't just sit in the case looking pretty.
It's got that kind of presence where you want to rack it,
feel the serrations bite, and see how it settles in your hand.
Smith & Wesson took the trusted Shield DNA
and stretched it just enough to make a difference,
adding a 3.6 inch barrel for a little extra sight radius and velocity,
plus a grip that finally gives your whole hand something to work with.
That means 13 or 15 round mags are on the menu,
with a 10 round option for states that demand it.
They gave it a real front rail too,
so you can throw on a compact light or laser without a goofy adapter.
The slide comes cut for RMSC or RMSCK footprint optics,
and the clear sight cut vents gas upward and away from your glass
so it stays cleaner when you're running strings at the range.
The Ameriglo Trooper Front Night Sight paired with a serrated rear
keeps the sight picture fast and crisp,
and the flat face trigger breaks in that 4 to 4.5 pound window
with a short, positive reset.
Specs keep it carry-friendly.
20.8 ounces unloaded, 0.9 inches wide,
and a stainless steel slide and barrel treated with Armor Night for corrosion resistance.
It's offered with or without a thumb safety, all sitting at a $599 MSRP.
On the hip, the Shield X feels familiar but more capable,
like S&W listened to what real carriers wanted and actually delivered.
For a July 2025 release, that's a smart move.
Beretta, a .300 Ultima Patrol 12 gauge with chisel stock.
The Beretta, a .300 Ultima Patrol,
already had a solid rep as the working man's tactical semi-auto,
but this new chisel stock variant makes it feel like a custom build straight from the factory.
Beretta paired their gas-operated 12 gauge action
with a 6061 billet aluminum stock from Chisel Machining,
the same type that's been winning fans on the 1301 tactical.
That stock isn't just for looks.
It's fully adjustable,
has a compact 13-inch length of pull for quick shoulder work,
an AR-style pistol grip,
an RMR optic plate right over the tang,
and multiple QD points for slings.
It shoulders fast and locks in like it's built for you.
The shotgun keeps the Ultima Patrol DNA intact.
19.1-inch barrel,
enlarged loading port,
extended bolt handle and bolt release for gloved hands,
oversized reversible safety,
and a seven-slot pick rail paired with M-LOK slots for lights, grips,
or whatever you want to hang on it.
You can run it in a 5-plus-1 or 7-plus-1 configuration,
depending on the tube.
In the hands,
the Chisel stock model feels planted but not heavy,
and that shorter LOP makes it quicker to run in tight spaces.
Recoil management stays classic, a 300,
which is soft for a 12-gauge thanks to the gas system,
and the controls are exactly where they need to be.
MSRP is $1,549,
which undercuts the 1301 Chisel by a good margin
while still giving you that premium stock feel.
For home defense, range work, or LE duty,
this new variant shows Berettas listening to shooters
who want high-end ergonomics without paying custom shop prices.
TESAS PX9 2.0 Duty Comp
The TESAS PX9 2.0 Duty Comp
feels like it was put together by people who actually shoot,
not just design on paper.
Rolled out in July 2025,
it takes the solid PX9 platform
and adds a factory-ported match-grade barrel
to keep the muzzle flat when you're running it fast.
The slide's cut for RMR pattern optics.
Set low enough to co-witness with the stock irons
so you can bolt a dot straight on without any funky adapters.
Out of the box, it runs on SIG P226 pattern mags
and comes with both 18 and 20 rounders,
which means fewer reloads
whether you're burning through drills or working a match.
The frame is polymer,
but TESAS fitted it with an aluminum flat-face trigger,
extended magwell, ambidextrous slide stop,
and an optional thumb safety.
You also get aggressive slide cuts for better grip
and some weight reduction up top.
The Tenifer QPQ finish on the barrel and slide
shrugs off sweat and grime,
and the overall dimensions,
which are 7.27 inches long and about 28 ounces,
make it easy to carry,
but big enough to handle duty work.
One of the nicest touches is the adjustable fit.
The grip system lets you swap panels and backstraps
for 27 different combinations,
so it can be tuned to your hand
instead of you adapting to the gun.
At an MSRP of $522.99,
it undercuts a lot of pistols with similar features,
yet nothing about it feels cheap.
This one's built to run hard, stay flat,
and keep you in the fight without draining your wallet.
Smith & Wesson Bodyguard 2.0 Carry Comp.
The Bodyguard name's been around long enough
that most folks already know it
as a pocket-sized, no-nonsense carry pistol.
For July 2025,
Smith & Wesson decided to give the new Bodyguard 2,
zero a Performance Center makeover,
and the result is the Carry Comp,
a micro-compact 3.8.0
that's easier to control than its size would suggest.
They kept the same 3.1-inch stainless barrel length,
but added a power port cut up at 12 o'clock,
venting gas upward to tame muzzle rise.
In a gun that weighs just 11.8 ounces unloaded,
that little bit of gas management
matters more than you'd think.
The upgrades don't stop there.
You get a Mariglou Protector Lumigreen Night Sights up front,
a flat-faced trigger that's far better
than the original Bodyguards,
and a full-coverage gray Armornite finish
over the slide and barrel.
The slide itself keeps those long,
aggressive serrations from the 2.0 update,
making it easy to run even with damp hands
or in a quick draw.
Capacity is solid for the footprint,
one zero plus one with the flush mag,
or one two plus one with the extended.
Overall height is right at four inches.
Width is just under one inch,
and length is 5.85 inches,
so it disappears in a pocket holster
or vanishes under a light shirt.
MSRP runs $549,
about a hundred more than the uncompensated version,
but you're getting the performance center treatment,
better sights,
and a comp built in from the factory.
For a deep concealment .380 that doesn't beat you up,
that's a smart trade.
Kimber CD's 9 Classic.
Kimber's CD-S9 Classic is the kind of pistol
that makes you rethink what a compact,
metal-framed carry gun can be.
It keeps the familiar feel of the old Micro 9 Slim,
all metal hammer fired,
but doubles the capacity
and smooths out the lines for everyday carry.
You've got two versions,
the Optics Ready 2,
toned with a stainless slide
over a black Kim Pro alloy frame,
and the more traditional dark gray model
without an optics cut.
Both run a 3.18 inch barrel,
come in at 6.2 inches overall length,
just one inch wide,
and weigh 21.44 ounces,
so they disappear under a cover garment.
Capacity is strong for the size,
1.3 plus 1 with the flush mag
and 1.5 plus 1 with the extended,
and both mags come in the box.
Controls are ambidextrous,
and the slide on the Optics Ready model
is cut for direct mount RMSC footprint optics
with a tag fiber lock front sight.
The non-optics version wears true glow tritium sights
with an orange front and white rear,
giving you a clean, fast sight picture in low light.
The Classic trims away the accessory rail
from the other CDS-9 models,
keeping the profile sleek and snag-free.
The Kim Pro finish holds up well against holster wear,
and the nylon grip panels give you solid purchase
without chewing up your hands.
MSRP lands at $865 for the Optics Ready model
and $795 for the no-optics version,
both shipping in a Kimber-branded range bag.
For shooters who like the 1911-style ergonomics
but want modern capacity and carry-friendly size,
the CDS-9 Classic nails that balance right out of the box.
Smith & Wesson M&P 15-AX series.
The M&P 15-AXE series drive opt in July 2025,
and honestly, S&W finally built an AR
that comes the way most of us end up setting them up anyway.
It's got full ambi controls right out of the box.
Mag release, bolt catch, safety.
So it doesn't matter if you're a lefty
or just want to be able to run the gun from either side.
They paired it with Gemtech's GVAC system in the upper,
which means if you're shooting suppressed,
you're not getting a face full of gas.
The ETM flash hider's on there too,
so it stays flat and clean.
Barrels of 4,150 CMV with 5R1-8 rifling,
Armor Knight finished.
The bolt's Carpenter 158 steel.
Carrier's 8,620, firing pins chromed.
Basically built to take whatever you throw at it.
They threw in a Radian Raptor charging handle,
Williams folding sights,
and a Midwest Industries M-LOK handguard.
Even the grips got interchangeable palm swells
so you can make it fit your mitts.
You've got four versions.
11.5-inch SBR at 6.2 pounds,
14.5-inch SBR at 6.6,
a 16.1-inch carbine at 6.65,
and the Performance Center model
that gets a Magpul DT stock,
Hyperfire trigger,
Ambi Radian safety,
and a slick gray Cerakote.
Prices run from about $1,559 to $1,649.
Point is, you don't have to buy this
and immediately start swapping parts.
Throw your can on,
load up some mags,
and it's ready to work.
Whether that's on the range,
in a class,
or out in the field.
