Carved bed part 1 wood carving

Eternal Sculptures
211 followers
7 Video Views·Aug 16, 2025
Hello, my friends.
I've got a bed, or rather one of the details.
I drew two drawings, I didn't come up with them.
I was also sent a photo with it.
Of course, the photo is of poor quality, nothing is clearly visible.
It was made from afar, I enlarge it on the computer, everything is blurred.
So, during the re-drawing, I made my own adjustments.
But this is all agreed with the client, so there is nothing wrong with it.
So, what are my further actions?
I'm going to re-draw on the right side, but only on the one I have already drawn.
I'll bring it in a mirror.
Then, with the help of a milling cutter, I will remove the background in these places.
The depth of the background will be about 5 mm.
Then I'm going to increase this element.
I will increase it by about 10-12 mm.
That's all, my friends, I'm starting to work.
I wish you a pleasant viewing.
I finished milling.
This side thread, namely the depth of the milling, turned out to be 6 mm.
Here is the central thread, I made it a little deeper, 7 mm.
I also pasted these central curls, I pasted 12 mm.
I put one side of the bed on the beveling machine,
the second, as you saw, on the edge of the table.
Everything is quite stable.
I'm starting to work with this side thread.
It turned out to be a pretty nice curl.
In the middle, I made a bulge along the outer part with a straight chisel.
At a slight angle, I just cut it off.
Well, I took off the chamfer in a circle.
And it turned out not a round, but almost a round.
It looks pretty interesting.
Next, I'm going to separate these leaves in these places,
lower them down and make a bulge here and here.
A rather unusual leaf.
Well, in the process of work, I think you saw how I did it.
Here is a bulge, here and here, on the outer part of the circle.
Here is a bulge, a circle.
By the way, it needs to be cut out so that it feels like it passes under this curl.
Next, I'm going to separate here, lower this whole curl and these leaves down.
Gradually, here will be a selection of the needed parts of the circle.
Well, in the process of work, I'll tell you how I'm going to do these leaves.
With the help of a corner, I separated these three leaves from the curl,
while lowering them down.
Well, now I'll do the same with these two on this side.
I'll separate and lower it down.
This curl is done in the same way as this one.
It turns out a bulge, a bulge.
Here it will fall down so that this vegetation covers it.
Then I'll lower these reeds down.
Then I won't round the outer part with a straight chisel,
but I'll just cut it off at a certain angle and remove the chamfer on the outer part.
I also want to go back to these leaves that are here.
I cut them out so that they go towards this curl at a slight angle.
I sanded it right away so that later there would be less work on sanding,
and I don't really like it.
I also filled in the background, made the details.
I also want to say, friends, I personally like to work with it.
This wood is so elastic, but here it turned out to be very hard.
Well, the direction of the fibers changes very often.
It was hard to work in one direction and then in the other.
Nevertheless, I think I did a good job.
In the next video, I will continue to make this central carving.
Quite an interesting drawing.
So subscribe so as not to miss it.
Like this video if you liked it.
Well, good luck to everyone.
See you.
