956 HP John Deere Forage Harvester Chopping Hay

Machine Unlimited
4 followers
Watch this John Deere 9900 forage harvester working on chopping 1st and 2nd cutting in one pass. Held up due to weather they are chopping double the normal amount of hay. The new 46R hay head lets them keep working plug free!
#machine #Equipment #HeavyMachinery
Hey Tractor Chasers, we are out in the field with this John Deere 9900 Forage Harvester
working on chopping hay in central New York. We're going to watch a bunch of different
trucks that it takes to keep up with this 956 horsepower Forage Harvester. We're going to get
up in the cab with John to find out how he's liking this brand new 9900 and also the updated
46R Hayhead. But for right now, let's go listen to this awesome Forage Harvester at work.
All right guys, we are up in the cab of the John Deere 9900 here
and they're chopping some hay. How's it going so far? Pretty good. I'm having a good day of it.
Chopping along with this new 46R Hayhead. How do you like it so far? I like it a lot,
especially with the anti-plug prevention. That's really saving me today. As I told you earlier,
as soon as your RPMs go down, you get too much haylage going in and it'll shut the
head and the whole thing right down. Keep you from plugging the pipe or anything else.
Because when you plug one of these up, it's not a fun job. It's not a fun job on a hot day. It's
a half hour away. I'd say it's probably an hour round trip for each truck. We got 14 trucks going,
seven semis, eight semis, and six 10 wheelers.
Is that about enough trucks for it or do you wish you had more? Well, as you have seen so far,
we could probably use maybe one more, but they're keeping up pretty good. I'm only sitting maybe
five minutes on a round trip. That's not too bad. Those smaller trucks come in handy on the
smaller fields. They sure do. We were just in some fields, probably only five acres,
really hilly and nasty, and the little trucks. Trying to take the little trucks in there and
keep the big rigs on this wide open 50 acre piece. You just upgraded to the new 9900 and
got it set up with the duals on it? Yeah. This chopper's only got about 50 hours on it. We just
started it up. It's got the new prototype head and it's really nice. Yes, the duals and we're
putting it through the ringer. Yeah. Now, why do you guys like having the duals on the chopper?
To me, it's a much smoother ride. I think on the road and in the field, to me, it just makes
everything much smoother. Probably helps with a little bit of compaction too.
And with the hay head on it, it really doesn't stick out any wider than the... No. I think
duals are the way to go. Run a lot of choppers without duals and I think it's smoother.
You guys are getting towards the end of first cutting now. How's it been so far? Heavy.
Had some real wet conditions, of course, with the spring we've had in the northeast.
But the hay has been real heavy. We've had some hay goes seven and a half ton of the acre.
It's definitely had plenty of rain to help it grow. Yeah, and it's so late that it's
gotten quite bushy. And so with the bigger windrows and the clumps, it's definitely
the anti-pluggers. Yeah, this new header does save on the plugging problems.
It's helped me out today alone. And you were saying it'll just completely shut off the head?
Yeah, when you take a bunch of hay in and your RPM starts to drag, it just shuts everything
right off. Header, cutter head, blower. Then you've got to reverse everything and reboot it
and start it back up. It's a lot easier than getting it out and unplugging it.
I hope you loved being out in the field with this 9900 Forge Harvester working on chopping hay.
If you love seeing farm equipment like this in action, please take a minute to subscribe
to the Tractor Chasers channel so you don't miss any videos. Thanks for watching!
